[1] 江经善. 多层隔热材料及其在航天器上的应用[J]. 宇航材料工艺, 2000, 30(4): 17-25.

    Jiang J S. Multilayer insulation materials and their application to spacecrafts[J]. Aerospace Materials & Technology, 2000, 30(4): 17-25.

[2] 吴晓迪. 多层隔热材料对卫星红外特性的影响[J]. 红外与激光工程, 2015, 44(6): 1721-1725.

    Wu X D. Influence of multilayer heat insulation material on infrared feature of a satellite[J]. Infrared and Laser Engineering, 2015, 44(6): 1721-1725.

[3] 杨明, 吕相银, 杨华, 等. 卫星表面隔热组件温度场的数值计算[J]. 红外技术, 2009, 31(9): 517-520, 524.

    Yang M, Lv X Y, Yang H, et al. Numerical calculation of the temperature field on the multilayer insulation of satellite's surface[J]. Infrared Technology, 2009, 31(9): 517-520, 524.

[4] 石进峰, 吴清文, 陈立恒, 等. 多层隔热材料飞行试验研究综述[J]. 中国光学, 2013, 6(4): 457-469.

    Shi J F, Wu Q W, Chen L H, et al. Review of flight tests for multi-layer insulator materials[J]. Chinese Optics, 2013, 6(4): 457-469.

[5] 田琪琛, 李智, 徐灿, 等. 基于光学散射特性的失稳空间目标旋转分析[J]. 光散射学报, 2017, 29(3): 266-270.

    Tian Q C, Li Z, Xu C, et al. Rotation analysis of unstable spaces based on optical scattering[J]. The Journal of Light Scattering, 2017, 29(3): 266-270.

[6] 李良超, 牛武斌, 吴振森. 空中复杂目标对背景红外辐射的散射的并行计算[J]. 系统工程与电子技术, 2011, 33(12): 2573-2576.

    Li L C, Niu W B, Wu Z S. Parallel calculation for scattering of background infrared irradiation from aerial complex targets[J]. Systems Engineering and Electronics, 2011, 33(12): 2573-2576.

[7] 韩意. 空间目标天基激光成像探测系统仿真研究[D]. 北京: 中国人民解放军装备学院, 2013.

    HanY. Research on space target space-based laser imaging detection system simulation[D]. Beijng: Chinese People's Liberation Army Academy ofEquipment, 2013.

[8] 徐灿, 张雅声, 李鹏, 等. 基于OpenGL拾取技术的空间目标光学横截面积计算[J]. 光学学报, 2017, 37(7): 0720001.

    Xu C, Zhang Y S, Li P, et al. Calculation of optical cross section areas of spatial objects based on OpenGL picking technique[J]. Acta Optica Sinica, 2017, 37(7): 0720001.

[9] 黄强. 空间光学系统的杂散光分析[J]. 红外, 2006, 27(1): 26-33.

    Huang Q. Analysis of stray light in space optical system[J]. Infrared, 2006, 27(1): 26-33.

[10] 李鹏. 空间目标光学散射特性建模与实验测量研究[D]. 北京: 中国人民解放军装备学院, 2016.

    LiP. Research on the numerical simulations and experimental measurement method of space object's visible scattering characteristics[D]. Beijng: Chinese People's Liberation Army Academy ofEquipment, 2016.

[11] 鲍文卓, 丛明煜, 张伟, 等. 基于面元网格化的空间目标光学特性计算方法[J]. 哈尔滨工业大学学报, 2010, 42(5): 710-715.

    Bao W Z, Cong M Y, Zhang W, et al. An optical characteristics calculating method based on surface mesh-creation for space targets[J]. Journal of Harbin Institute of Technology, 2010, 42(5): 710-715.

[12] 王付刚, 张伟, 王治乐. 基于区域网格化的空间目标光学特性计算方法[J]. 航天返回与遥感, 2012, 33(2): 81-87.

    Wang F G, Zhang W, Wang Z L. A calculation method for space target optical characteristics based on local region surface mesh-creation[J]. Spacecraft Recovery & Remote Sensing, 2012, 33(2): 81-87.

[13] 宋潇捷. 空间目标三维网格化建模和光学特性计算方法研究[D]. 哈尔滨: 哈尔滨工业大学, 2010.

    Song XJ. Study on three-dimensional grid modeling and optical characteristics calculating methods of space target[D]. Harbin: Harbin Institute of Technology, 2010.

[14] 叶秋. 空中复杂目标散射计算方法研究[D]. 合肥: 合肥工业大学, 2015.

    YeQ. The study of complex air target scattering calculation method[D]. Heifei: Heifei University of Technology, 2015.

[15] 侯晴宇, 巩晋南, 樊志鹏, 等. 在轨空间目标光学特性宏观表征模型的反演重构[J]. 物理学报, 2017, 66(15): 154201.

    Hou Q Y, Gong J N, Fan Z P, et al. Inversion and reconstruction of the macroscopic photometric characterization model for on-orbit space object[J]. Acta Physica Sinica., 2017, 66(15): 154201.

[16] 薛媛媛. 仿真褶皱材质在3DS MAX虚拟现实中的应用[J]. 山西科技, 2009( 2): 41- 42.

    Xue YY. Studyof the application of simulated folding Material in 3DS MAX virtual reality[J]. Shanxi Science and Technology, 2009( 2): 41- 42.

[17] 杨玉峰. 不规则褶皱表面目标的光谱散射特性研究[D]. 西安: 西安电子科技大学, 2012.

    Yang YF. Study on spectral scattering properties of target with irregular fold surface[D]. Xi'an:Xidian University, 2015.

[18] 杨帆, 宣益民, 韩玉阁. 航天器起伏表面的红外辐射特性[J]. 红外与激光工程, 2016, 45(5): 0504003.

    Yang F, Xuan Y M, Han Y G. Infrared characteristics of spacecraft undulating surface[J]. Infrared and Laser Engineering, 2016, 45(5): 0504003.

[19] 黄珣. 裸露起伏地表光散射特性研究[D]. 西安: 西安电子科技大学, 2015.

    HuangX. Study on light scattering characteristics of bare surface over rugged terrain[D]. Xian: Xidian University, 2015.

[20] HallD. Surface material characterization from multi-band optical observations[C]∥ Proceedings of the Advanced Maui Optical and Space Surveillance Technologies Conference, 2010: E6.

[21] 刘程浩, 李智, 徐灿. 针对空间目标常用材质菲涅耳反射现象的改进Phong模型[J]. 激光与光电子学进展, 2017, 54(10): 102901.

    Liu C H, Li Z, Xu C. Amodified Phong model for Fresnel reflection phenomenon of commonly used materials for space targets[J]. Laser & Optoelectronics Progress, 2017, 54(10): 102901.

[22] 王阳, 杜小平, 范椿林. 地基光度曲线反演空间目标特征技术研究进展[J]. 科学通报, 2017, 62(15): 1578-1590.

    Wang Y, Du X P, Fan C L. Progress of cure inversion technology for resident space object characteristics[J]. Chinese Science Bulletin, 2017, 62(15): 1578-1590.

[23] 刘浩, 杜小平, 苟瑞新. 基于Phong模型的地球同步轨道目标视星等仿真研究[J]. 激光与光电子学进展, 2016, 53(4): 041502.

    Liu H, Du X P, Gou R X. Apparent magnitude measurement of geosynchronous orbit space object based on Phong model[J]. Laser & Optoelectronics Progress, 2016, 53(4): 041502.