流道截面参量对微通道水冷镜热变形的影响
[1] 杜燕贻, 安建祝, 束小建. 腔镜热变形对非稳腔光场特性的影响[J]. 强激光与粒子束, 2008, 20(8): 1332~1337
Du Yanyi, An Jianzhu, Shu Xiaojian. Effect of thermal distortion of mirror on characteristics of laser beam in unstable resonator[J]. High Power Laser and Particle Beams, 2008, 20(8): 1332~1337
[2] 刘泽金, 周朴, 许晓军. 高能激光光束质量通用评价标准的探讨[J]. 中国激光, 2009, 36(4): 773~778
[3] V. V. Apollonov, A. I. Barchukov, V. N. Lukanin et al.. Possibility of using structures with open pores in construction of cooled mirrors[J]. Sov. J. Quantum Electron., 1978, 8(5): 672~673
[4] V. V. Apollonov, P. I. Bystrov, Y. A. Brovalskii et al.. Feasibility of using liquid-metal heat carriers to cool power optics components made of porous structures[J]. Sov. J. Quantum Electron., 1981, 11(6): 796~798
[5] D. B. Tuckerman, R. E. W. Pease. High performance heat sinking for VLSL[J]. IEEE Electr. Device Lett., 1981, EDL-2(5): 126~129
[6] J. Judy, D. Maynes, B. W. Webb. Characterization of frictional pressure drop for liquid flows through microchannels[J]. Int. J. Heat and Mass Transfer, 2002, 45(17): 3477~3489
[7] Weilin Qu, Issam Mudawar. Experimental and numerical study of pressure drop and heat transfer in a single phase micro-channel heat sink[J]. Int. J. Heat and Mass Transfer, 2002, 45(12): 2549~2565
[8] Poh-Seng Lee, Suresh V. Garimella, Dong Liu. Investigation of heat transfer in rectangular microchannels[J]. Int. J. Heat and Mass Transfer, 2005, 48(9): 1688~1704
[9] 余亮英, 程祖海, 朱海红 等. 强激光作用下水冷硅镜沟槽参数的模拟分析[J]. 强激光与粒子束, 2007, 19(3): 353~356
[10] 余文峰, 程祖海, 孙峰 等. 高功率多层水冷硅基反射镜的研究[J]. 中国激光, 2004, 31(s): 489~491
Yu Wenfeng, Cheng Zuhai, Sun Feng et al.. Investigation of the multilayer water-cooling Si mirror used in high power laser[J]. Chinese J. Lasers, 2004, 31(s): 489~491
[11] 陈佳元. 高功率TEA CO2激光器腔镜热稳定性研究[D]. 武汉: 华中科技大学, 2009
Chen Jiayuan. Study on the Stability of Mirrors of High Power TEA CO2 Laser[D]. Wuhan. Huazhong University of Science and Technology, 2009
[12] 李斌, 焦路光, 刘亮 等. 射流式碳化硅水冷镜数值模拟[J]. 中国激光, 2011, 38(2): 0202009
[13] 尧舜, 丁鹏, 刘江 等. 高光束质量大功率半导体激光阵列的微通道热沉[J]. 中国激光, 2009, 36(9): 2286~2289
[14] Hao Li, Michael G. Olsen. MicroPIV measurements of turbulent flow in square microchannels with hydraulic diameters from 200 μm to 640μm[J]. Int. J. Heat and Fluid Flow, 2006, 27(1): 123~134
[15] C. Rands, B. W. Webb, D. Maynes. Characterization of transition to turbulence in microchannels[J]. Int. J. Heat and Mass Transfer, 2006, 49(17-18): 2924~2930
[16] 陶文锉. 数值传热学(第二版)[M]. 西安: 西安交通大学出版社, 2001
Tao Wencuo. Numerical Heat Transfer (Second edition)[M]. Xi′an: Xi′an Jiaotong University Press, 2001
[17] Andrei G. Fedorov, Raymond Viskanta. Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging[J]. Int. J. Heat and Mass Transfer, 2000, 43(3): 399~415
[18] F. P. Incropera, D. P. DeWitt. Fundamentals of Heat and Mass Transfer[M]. New York: Wiley, 1996
胡攀攀, 朱海红, 左都罗. 流道截面参量对微通道水冷镜热变形的影响[J]. 中国激光, 2011, 38(11): 1102001. Hu Panpan, Zhu Haihong, Zuo Duluo. Influence of Channel Parameters on Thermal-Deformation of Microchannel Mirror[J]. Chinese Journal of Lasers, 2011, 38(11): 1102001.