基于可视化观察的光纤激光深熔焊接羽辉形成原因分析 下载: 919次
韩雪, 赵宇, 邹江林, 肖荣诗, 赵乐. 基于可视化观察的光纤激光深熔焊接羽辉形成原因分析[J]. 中国激光, 2020, 47(6): 0602004.
Han Xue, Zhao Yu, Zou Jianglin, Xiao Rongshi, Zhao Le. Analysis of Plume Formation Reasons in Laser Deep Penetration Welding Based on Visual Observation[J]. Chinese Journal of Lasers, 2020, 47(6): 0602004.
[1] Ruppik S, Becker F, Grundmann F P, et al. High-power disk and fiber lasers: a performance comparison[J]. Proceedings of SPIE, 2012, 8235: 82350V.
[2] Quintino L, Costa A, Miranda R, et al. Welding with high power fiber lasers: a preliminary study[J]. Materials & Design, 2007, 28(4): 1231-1237.
[3] 徐国建, 李响, 杭争翔, 等. 光纤激光及CO2激光焊接高强钢[J]. 激光与光电子学进展, 2014, 51(3): 031403.
[4] 邹江林, 吴世凯, 肖荣诗, 等. 高功率光纤激光和CO2激光焊接熔化效率对比[J]. 中国激光, 2013, 40(8): 0803002.
[5] 张明军. 万瓦级光纤激光深熔焊接厚板金属蒸气行为与缺陷控制[D]. 长沙: 湖南大学, 2013.
Zhang MJ. Study on the behavior of metallic vapor plume and defects control during deep penetration laser welding of thick plate using 10-kW level high power fiber laser[D]. Changsha: Hunan University, 2013.
[6] 邹江林, 李飞, 牛建强, 等. 高功率光纤激光焊接羽辉对焊接过程的影响[J]. 中国激光, 2014, 41(6): 0603005.
[7] Kawahito Y, Matsumoto N, Mizutani M, et al. Characterisation of plasma induced during high power fibre laser welding of stainless steel[J]. Science and Technology of Welding and Joining, 2008, 13(8): 744-748.
[8] Shcheglov P Y, Gumenyuk A V, Gornushkin I B, et al. Vapor-plasma plume investigation during high-power fiber laser welding[J]. Laser Physics, 2013, 23(1): 016001.
[9] 任勇, 武强, 邹江林, 等. 奥氏体不锈钢光纤激光同轴保护焊接的实时监测[J]. 中国激光, 2017, 44(5): 0502003.
[11] Kawahito Y, Kinoshita K, Matsumoto N, et al. Interaction between laser beam and plasma/plume induced in welding of stainless steel with ultra-high power density fiber laser[J]. Quarterly Journal of the Japan Welding Society, 2007, 25(3): 461-467.
[13] Zou J L, Yang W X, Wu S K, et al. Effect of plume on weld penetration during high-power fiber laser welding[J]. Journal of Laser Applications, 2016, 28(2): 022003.
[14] Wang J, Wang C M, Meng X X, et al. Study on the periodic oscillation of plasma/vapour induced during high power fibre laser penetration welding[J]. Optics & Laser Technology, 2012, 44(1): 67-70.
[15] Zou J L, Ha N, Xiao R S, et al. Interaction between the laser beam and keyhole wall during high power fiber laser keyhole welding[J]. Optics Express, 2017, 25(15): 17650-17656.
[16] 哈纳. 高功率光纤激光深熔焊接小孔特性行为实验研究[D]. 北京: 北京工业大学, 2018.
HaN. Experimental study on characterisation behavior of keyhole during high power fiber laser deep penetration welding[D]. Beijing: Beijing University of Technology, 2018.
[17] 姜梦. 真空环境下激光焊接等离子体特性研究[D]. 哈尔滨: 哈尔滨工业大学, 2015.
JiangM. Study on the characteristics of plasma in laser welding under vacuum conditions[D]. Harbin: Harbin Institute of Technology, 2015.
[18] Katayama S, Yohei A, Mizutani M, et al. Development of deep penetration welding technology with high brightness laser under vacuum[J]. Physics Procedia, 2011, 12: 75-80.
[19] Katayama S, Yohei A, Mizutani M, et al. Deep penetration welding with high power laser under vacuum[J]. Transactions of Joining and Welding Research Institute, 2011, 40(1): 15-19.
韩雪, 赵宇, 邹江林, 肖荣诗, 赵乐. 基于可视化观察的光纤激光深熔焊接羽辉形成原因分析[J]. 中国激光, 2020, 47(6): 0602004. Han Xue, Zhao Yu, Zou Jianglin, Xiao Rongshi, Zhao Le. Analysis of Plume Formation Reasons in Laser Deep Penetration Welding Based on Visual Observation[J]. Chinese Journal of Lasers, 2020, 47(6): 0602004.