[1] Bassett W A, Skalwold E A. Diamond cleavage: importance to high pressure research[J]. High Pressure Research, 2017, 37(1): 46-58.

[2] 陈根余, 朱智超, 殷赳, 等. 单晶金刚石飞秒激光加工的烧蚀阈值实验[J]. 中国激光, 2019, 46(4): 0402001.

    Chen G Y, Zhu Z C, Yin J, et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing[J]. Chinese Journal of Lasers, 2019, 46(4): 0402001.

[3] Derry T E, van der Berg N, Makau N W. Diamond surfaces polished both mechanically and manually; an atomic force microscopy (AFM) study[J]. Diamond and Related Materials, 2008, 17(2): 127-136.

[4] Ollison C D, Brown W D, Malshe A P, et al. A comparison of mechanical lapping versus chemical-assisted mechanical polishing and planarization of chemical vapor deposited (CVD) diamond[J]. Diamond and Related Materials, 1999, 8(6): 1083-1090.

[5] Fonda P, Katahira K, Kobayashi Y, et al. WEDM condition parameter optimization for PCD microtool geometry fabrication process and quality improvement[J]. The International Journal of Advanced Manufacturing Technology, 2012, 63(9): 1011-1019.

[6] 杨凯华. CVD金刚石圆弧刃微铣刀的结构设计和刃磨研究[D]. 南京:南京航空航天大学, 2019.

    Yang KH. Research on structure design and grinding research of diamond arc edge micro milling cutter[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2019.

[7] ShresthaR, Zhan ZB, HeN, et al., 2014, 800/801: 633- 638.

[8] Mouhamadali F, Equis S, Saeidi F, et al. Nanosecond pulsed laser-processing of CVD diamond[J]. Optics and Lasers in Engineering, 2020, 126: 105917.

[9] 杨泽齐, 段军, 陈航, 等. 皮秒贝塞尔光束切割化学强化玻璃[J]. 中国激光, 2019, 46(11): 1102010.

    Yang Z Q, Duan J, Chen H, et al. Chemically strengthened glass fabricated by picosecond Bessel beam cutting[J]. Chinese Journal of Lasers, 2019, 46(11): 1102010.

[10] 秦晓阳, 黄婷, 肖荣诗. 高功率绿光飞秒激光诱导产生钛表面周期性微结构[J]. 中国激光, 2019, 46(10): 1002006.

    Qin X Y, Huang T, Xiao R S. Periodic microstructure on Ti surface induced by high-power green femtosecond laser[J]. Chinese Journal of Lasers, 2019, 46(10): 1002006.

[11] Eberle G, Wegener K. Ablation study of WC and PCD composites using 10 picosecond and 1 nanosecond pulse durations at green and infrared wavelengths[J]. Physics Procedia, 2014, 56: 951-962.

[12] Chen N, Li Z J, Wu Y, et al. Investigating the ablation depth and surface roughness of laser-induced nano-ablation of CVD diamond material[J]. Precision Engineering, 2019, 57: 220-228.

[13] Li Z J, Chen N, Li L, et al. Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining[J]. Ceramics International, 2020, 46(12): 20510-20520.

[14] 马兰州. CVD 金刚石微铣刀的复合制备工艺研究[D]. 南京:南京航空航天大学, 2019.

    Ma LZ. Research on fabrication of CVD diamond micro milling tool with hybrid machining process[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2019.

[15] 王根旺. 基于能量分布的激光热源模型建立及其仿真应用研究[D]. 哈尔滨:哈尔滨工业大学, 2017.

    Wang GW. Modeling and simulation of laser heat source based on energy distribution[D]. Harbin: Harbin Institute of Technology, 2017.

[16] Hirai H, Hidai H, Matsusaka S, et al. Diamond slicing using ultrashort laser-induced graphitization and additional nanosecond laser illumination[J]. Diamond and Related Materials, 2019, 96: 126-133.

[17] Stock F, Antoni F, Diebold L, et al. UV laser annealing of diamond-like carbon layers obtained by pulsed laser deposition for optical and photovoltaic applications[J]. Applied Surface Science, 2019, 464: 562-566.

[18] Hu A, Sanderson J, Zhou Y, et al. Formation of diamond-like carbon by fs laser irradiation of organic liquids[J]. Diamond and Related Materials, 2009, 18(5/6/7/8): 999-1001.