超薄直下式LED平板灯的大角度透镜设计与仿真

李建鹏; 郭震宁; 林介本; 张佳宁; 杨玉龙; 薛冬冬; 陈中行; 黄学铃

doi:doi:10.3788/lop54.112203

激光与光电子学进展, 2017, 54 (11): 112203, 网络出版: 2017-11-17

超薄直下式LED平板灯的大角度透镜设计与仿真下载： 1286次

Design and Simulation of Large Angle Lens for Ultra-Thin Direct-Down LED Panel Light

论文大纲

李建鹏 ¹郭震宁 ^1,2,*林介本 ²张佳宁 ¹杨玉龙 ¹薛冬冬 ¹陈中行 ¹黄学铃 ²

作者单位

¹ 华侨大学信息科学与工程学院福建省光传输与变换重点实验室, 福建厦门 361021

² 泉州市世芯智能照明技术研究院有限公司, 福建泉州 362302

AI 词云图 AI语音精读 AI语音超短摘要

注：本部分内容由 AI 自动生成，请您知悉。

摘要

基于能量守恒定律和网格划分法，设计了一款用于超薄直下式发光二极管（LED）平板灯的大角度透镜。以朗伯型发光LED在高度为96 mm下的目标面照度分布作为期望照度分布，对大角度LED透镜进行反馈优化，使其在高度为25 mm的目标面上就形成具有期望照度分布的光场。为探究优化后的大角度LED透镜对直下式LED平板灯的厚度减薄程度，将目标面高度分别设为20，25，30 mm，方形LED阵列的间距分别设为96，82，75 mm，利用LightTools软件模拟分析了直下式LED平板灯的目标面照度均匀度。研究结果表明，当目标面高度为25 mm、方形LED阵列的间距为82 mm时，目标面上的照度均匀度最好，其值(照度最小值除以照度最大值)达至0.8756，符合国家LED室内照明应用技术要求。

Abstract

Based on the law of conservation of energy and the mesh generation method, a lens with large view angle for ultra-thin direct-down LED panel light is proposed. The illumination distribution of the target plane of the Lambertian type LED at a height of 96 mm is used as the desired illumination distribution to optimize the feedback of the large angle LED lens, and form a light field with a desired illumination distribution on a target plane with a height of 25 mm. To investigate the influence of the large angle LED lens after optimization on the thickness reduction degree of the straight down LED flat lamp, the height of the target surface is set to be 20, 25, 30 mm respectively, and then the spacing of the square LED arrays is set to be 96, 82, 75 mm respectively. The software LightTools is used to simulate and analyze the uniformity of the target illumination of the direct LED flat lamp. The results show that when the target plane height is 25 mm and the pitch of the square LED array is 82 mm, the illumination uniformity of the target plane is the best. And the value (the minimum illumination is divided by the maximum illuminance) is 0.8756, which meets the national technical requirements for the application of LED indoor lighting.

参考文献

[1] 潘浩, 陈国庆, 杜伯钧. 基于三次样条的双自由曲面LED匀光透镜设计［J］. 激光与光电子学进展, 2016, 53(3): 032201.

Pan Hao, Chen Guoqing, Du Bojun. Design of double freeform surface lens for LED uniform illumination based on cubic splines［J］. Laser & Optoelectronics Progress, 2016, 53(3): 032201.

[2] Wu R, Hua H. Direct design of aspherical lenses for extended non-Lambertian sources in three-dimensional rotational geometry［J］. Optics Express, 2016, 24(2): 1017-1030.

[3] 曹艳亭, 陈超, 梁培, 等. 荧光粉封装方式对多芯片阵列LED封装效率的影响［J］. 光子学报, 2016, 45(7): 0723003.

Cao Yanting, Chen Chao, Liang Pei, et al. Effect of different packaging of phosphor on the encapsulation efficiency of multi-chips LED［J］. Acta Photonica Sinica, 2016, 45(7): 0723003.

[4] 颜稳萍, 郭震宁, 林介本, 等. 基于逆向优化设计的高能量利用率LED路灯透镜［J］. 光学学报, 2015, 35(4): 0422008.

Yan Wenping, Guo Zhenning, Lin Jieben, et al. LED street lamp lens with high energy efficiency utilization based on reverse optimization design［J］. Acta Optica Sinica, 2015, 35(4): 0422008.

[5] 赖丽萍, 庄其仁, 刘士伟, 等. 用于LED平板灯面板均匀照明的自由曲面透镜设计与实现［J］. 红外与激光工程, 2015, 44(2): 561-566.

Lai Liping, Zhuang Qiren, Liu Shiwei, et al. Design of freeform lens for uniform illumination on panel of LED flat light［J］. Infrared and Laser Engineering, 2015, 44(2): 561-566.

[6] Wu H, Zhang X M, Ge P. Design method of a light emitting diode front fog lamp based on a freeform reflector［J］. Optics & Laser Technology, 2015, 72: 125-133.

[7] 颜稳萍, 郭震宁, 林介本, 等. 实现近场均匀照明的双自由曲面大角度透镜设计［J］. 光子学报, 2015, 44(1): 0122002.

Yan Wenping, Guo Zhenning, Lin Jieben, et al. Design of double freeform-surface lens with large view angle for uniform illumination of the near-field［J］. Acta Photonica Sinica, 2015, 44(1): 0122002.

[8] 肖箫, 文尚胜, 陈建龙, 等. 直下式LED背光源模组第二扩散导光板光学特性分析［J］. 光电子·激光, 2013, 24(4): 679-686.

Xiao Xiao, Wen Shangsheng, Chen Jianlong, et al. Optical performance of secondary lightguide-diffusive component in direct LED backlight module［J］. Journal of Optoelectronics·Laser, 2013, 24(4): 679-686.

[9] 陈新睿, 韩敬华, 李洪儒, 等. 基于近场均匀照明的LED阵列的优化设计［J］. 应用光学, 2014, 35(1): 122-127.

Chen Xinrui, Han Jinghua, Li Hongru, et al. Optimal design of LED arrays for near-field uniform illumination［J］. Journal of Applied Optics, 2014, 35(1): 122-127.

[10] Hu R, Gan Z, Luo X, et al. Design of double freeform-surface lens for LED uniform illumination with minimum Fresnel losses［J］. Optik-International Journal for Light and Electron Optics, 2013, 124(19): 3895-3897.

[11] 潘诗发, 郭震宁, 颜稳萍, 等. 用于LED广告灯箱的自由曲面大角度透镜设计与仿真［J］. 光子学报, 2016, 45(2): 0222002.

Pan Shifa, Guo Zhenning, Yan Wenping, et al. Design and simulation of freeform-surface large angle lens for LED advertising light boxes［J］. Acta Photonica Sinica, 2016, 45(2): 0222002.

[12] 史晨阳, 文尚胜, 陈颖聪. 基于Taguchi方法的曲面LED阵列照度问题研究［J］. 发光学报, 2015, 36(3): 348-354.

Shi Chenyang, Wen Shangsheng, Chen Yingcong.Study on curved surface LED array illumination problem based on Taguchi method［J］. Chinese Journal of Luminescence, 2015, 36(3): 348-354.

[13] 王恺. 大功率LED封装与应用的自由曲面光学研究［D］. 武汉: 华中科技大学, 2011: 22-76.

Wang Kai. Free-form optics study for high power LED packages and applications［D］. Wuhan: Huazhong University of Science and Technology, 2011: 22-76.

[14] Whang J W, Chen Yiyung, Teng Yuanting. Designing uniform illumination systems by surface-tailored lens and configurations of LED arrays［J］. Journal of Display Technology, 2009, 5(3): 94-103.

[15] GB/T 31831-2015, LED室内照明应用技术要求［S］. 北京: 中国标准出版社, 2015.

GB/T 31831-2015, Technical requirements for application of LED indoor lighting［S］. Beijing: Standards Press of China, 2015.

[16] 颜稳萍, 郭震宁, 林介本, 等. 直下式LED平板灯的均匀照明设计［J］. 光电子·激光, 2014, 25(10): 1878-1885.

Yan Wenping, Guo Zhenning, Lin Jieben, et al. Direct-down LED panel light design for uniform illumination［J］. Journal of Optoelectronics·Laser, 2014, 25(10): 1878-1885.

[17] 董丽, 刘华, 王尧, 等. 紧凑型LED配光设计中光源模型可靠性研究［J］. 光子学报, 2014, 43(2): 0222003.

Dong Li, Liu Hua, Wang Yao, et al. Reliablity of light source modeling for distribution design on compact LED［J］. Acta Photonica Sinica, 2014, 43(2): 0222003.

[18] 钱可元. LED近场光学模型与直下式背光源透镜的设计优化［J］. 光学学报, 2015, 35(5): 0522001.

Qian Keyuan. Near field optical modeling of LED and design optimization for direct-type backlight optical system［J］. Acta Photonica Sinica, 2015, 35(5): 0522001.

[19] Wang K, Wu D, Qin Z, et al. New reversing design method for LED uniform illumination［J］. Optics Express, 2011, 19(S4): A830-A840.

[20] Qin Z, Wang K, Chen F, et al. Analysis of condition for uniform lighting generated by array of light emitting diodes with large view angle［J］. Optics Express, 2010, 18(16): 17460-17476.

李建鹏, 郭震宁, 林介本, 张佳宁, 杨玉龙, 薛冬冬, 陈中行, 黄学铃. 超薄直下式LED平板灯的大角度透镜设计与仿真[J]. 激光与光电子学进展, 2017, 54(11): 112203. Li Jianpeng, Guo Zhenning, Lin Jieben, Zhang Jianing, Yang Yulong, Xue Dongdong, Chen Zhonghang, Huang Xueling. Design and Simulation of Large Angle Lens for Ultra-Thin Direct-Down LED Panel Light[J]. Laser & Optoelectronics Progress, 2017, 54(11): 112203.

超薄直下式LED平板灯的大角度透镜设计与仿真下载： 1286次

关于本站 Cookie 的使用提示

全站搜索

超薄直下式LED平板灯的大角度透镜设计与仿真 下载： 1286次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

超薄直下式LED平板灯的大角度透镜设计与仿真下载： 1286次