[1] 周学凯, 米高阳, 刘森, 等. 304不锈钢/T2紫铜超薄板激光搭接焊[J]. 中国激光, 2017, 44(8): 0802006.

    Zhou X K, Mi G Y, Liu S, et al. Laser lap welding of 304 stainless steel/T2 red copper ultra-thin sheets[J]. Chinese Journal of Lasers, 2017, 44(8): 0802006.

[2] 李春玲, 樊丁, 于晓全, 等. 铝/镀锌钢电弧辅助激光涂粉填丝熔钎焊方法[J]. 中国激光, 2016, 43(7): 0702007.

    Li C L, Fan D, Yu X Q, et al. Method of arc-assisted laser wire welding-brazing between aluminum and galvanized steel with filler powder[J]. Chinese Journal of Lasers, 2016, 43(7): 0702007.

[3] 檀财旺, 黄煜华, 陈波, 等. 镁/钛激光熔钎焊界面微观结构与元素热力学行为分析[J]. 中国激光, 2016, 43(3): 0303009.

    Tan C W, Huang Y H, Chen B, et al. Microstructure and thermodynamic behavior of laser welded-brazed Mg/Ti dissimilar joint[J]. Chinese Journal of Lasers, 2016, 43(3): 0303009.

[4] Wei S Z, Li Y J, Wang J, et al. Microstructure and joining mechanism of Ti/Al dissimilar joint by pulsed gas metal arc welding[J]. International Journal of Advanced Manufacturing Technology, 2014, 70(5/6/7/8): 1137-1142.

[5] Guo S, Peng Y, Cui C, et al. Microstructure and mechanical characterization of re-melted Ti-6Al-4V and Al-Mg-Si alloys butt weld[J]. Vacuum, 2018, 154: 58-67.

[6] Chen S H, Li L Q, Chen Y B. et al. Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process[J]. Journal of Alloys and Compounds, 2011, 509(3): 891-898.

[7] 马志鹏, 于心泷, 孟庆武. 钛/铝异种合金电弧熔钎焊接接头的组织与断裂行为[J]. 中国有色金属学报, 2015, 25(11): 3067-3076.

    Ma Z P, Yu X L, Meng Q W. Microstructure and fracture behavior of arc welding-brazing joints between titanium and aluminum dissimilar alloys[J]. The Chinese Journal of Nonferrous Metals, 2015, 25(11): 3067-3076.

[8] 李洪剑. 基于空间电子束热源的TA2纯钛/2024铝合金熔钎焊工艺及机理研究[D]. 哈尔滨: 哈尔滨工业大学, 2016: 17- 55.

    Li HJ. Process and mechanism research of welding-brazing TA2 pure titanium to 2024 aluminum alloy joint based on space electron beam heat source[D]. Harbin: Harbin Institute of Technology, 2016: 17- 55.

[9] Kenevisi M S. Mousavi Khoie S M. A study on the effect of bonding time on the properties of Al7075 to Ti-6Al-4V diffusion bonded joint[J]. Materials Letters, 2012, 76(6): 144-146.

[10] Zain-ul-abdein M, Nélias D, Jullien J F, et al. . Experimental investigation and finite element simulation of laser beam welding induced residual stresses and distortions in thin sheets of AA 6056-T4[J]. Materials Science and Engineering: A, 2010, 527(12): 3025-3039.

[11] 李兴霞, 王红玉, 张建勋. TC4钛合金激光焊缝形貌与残余应力数值分析[J]. 焊接学报, 2013, 34(12): 79-82.

    Li X X, Wang H Y, Zhang J X. Numerical analysis of laser weld morphology and residual stresses of TC4 titanium alloy[J]. Transactions of the China Welding Institution, 2013, 34(12): 79-82.

[12] 陈树海, 李俐群, 陈彦宾. 铝/钛异种合金激光熔钎焊接头界面特性[J]. 中国有色金属学报, 2008, 18(6): 991-996.

    Chen S H, Li L Q, Chen Y B. Interface characteristic and property of Ti/Al dissimilar alloys joint with laser welding-brazing[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(6): 991-996.

[13] 陈树海, 李俐群, 陈彦宾. 矩形光斑钛/铝异种合金激光熔钎焊[J]. 中国激光, 2008, 35(12): 2036-2041.

    Chen S H, Li L Q, Chen Y B. Laser welding-brazing of Ti/Al dissimilar alloys joint with rectangle spot[J]. Chinese Journal of Lasers, 2008, 35(12): 2036-2041.

[14] Song Z H, Nakata K, Wu A P, et al. Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove[J]. Materials Science and Engineering: A, 2013, 560: 111-120.