不同脉宽皮秒激光对介质膜损伤修复的热影响

熊智敏; 张攀政; 范薇; 汪小超; 黄大杰; 李学春

doi:doi:10.3788/cjl201239.0803005

中国激光, 2012, 39 (8): 0803005, 网络出版: 2012-07-09

不同脉宽皮秒激光对介质膜损伤修复的热影响

Heat Affection of Pico-Second Laser Irradiation with Different Widths on the Dielectric Film Damage Ablation

论文大纲

熊智敏 ^*张攀政范薇汪小超黄大杰李学春

作者单位

中国科学院上海光学精密机械研究所高功率激光与物理联合实验室，上海 201800

薄膜超快光学多膜层光学元件损伤扫描修复 thin films ultrafast optics damage of multi-layers optical components scanning repairing

摘要

为了更深层次探究超短脉冲激光对惯性约束聚变(ICF)光学系统中常见的多膜层元件损伤修复性能以及特点，分别采用了240、35、6 ps的1053 nm激光脉冲在1053 nm 0°高反膜上进行了损伤修复以及损伤增长测试实验，并在1053 nm 45°高反膜上进行了大损伤区域的扫描修复实验。通过比较不同脉宽的修复点形貌以及损伤增长阈值，说明了超短脉冲用于修复多膜层光学元件损伤的优越性，并且脉宽越短修复效果越好。多点脉冲扫描修复结果表明，可以通过三维控制系统来任意控制扫描修复点形貌以达到最佳修复状态。

Abstract

In order to deeply explore the damage characteristic and damage morphology of multi-layer optical components in inertial confinement fusion (ICF) optical system, 1053 nm laser pulses with different widths of 240, 35, 6 ps have been used to research damage ablation and damage resistant experiments at large area damage pits at 45° high reflection film. By comparing the morphology and damage resistant threshold of the ablation pits at different pulse widths, the results show that it is superior to use ultra-short pulse to repair multi-layers optical components, and the shorter pulse width is used, the better results can be got. The results of scanning ablation indicate that with the help of three-dimensional control system, the better repairing status can be got by changing the shape of the ablation pits.

参考文献

[1] A. K. Burnham, L. Hackel, P. Wegner et al.. Improving 351-nm damage performance of large-aperture fused silica and DKDP optics［C］. SPIE, 2002, 4679: 173～185

[2] P. Geraghty, W. Carr, V. Draggoo et al.. Surface damage growth mitigation on KDP/DKDP optics using single-crystal diamond micro-machining ball end mill contouring［C］. SPIE, 2006, 6403: 64030Q

[3] L. Hrubech, J. Adams, M. Feit et al.. Surface damage growth mitigation on KDP/DKDP optics using single-crystal diamond micro-machining［C］. SPIE, 2004, 5273: 273～281

[4] S. T. Yang, M. J. Matthews, S. Elhadj et al.. Comparing the use of mid-infrared versus far-infrared lasers for mitigating damage growth on fused silica［J］. Appl. Opt., 2010, 49(14): 2606～2616

[5] 黄进, 赵松楠, 王海军等. 熔石英表面缺陷的CO2激光局部修复技术［J］. 中国激光, 2009, 36(5): 1282～1286

Huang Jin, Zhao Songnan, Wang Haijun et al.. Local CO2 laser treatment for repair surface defect in fused silica［J］. Chinese J. Lasers, 2009, 36(5): 1282～1286

[6] D. N. Nguyen, L. A. Emmert, P. Schwoebel et al.. Femtosecond pulse damage thresholds of dielectric coatings in vacuum［J］. Opt. Express, 2011, 19(6): 5690～5697

[7] J. Bonse, S. Baudach, W. Kautek et al.. Femtosecond laser damage of a high reflecting mirror［J］. Thin Solid Films, 2002, 408(1-2): 297～301

[8] M. Mielke, D. Gaudiosi, K. Kim et al.. Ultrafast fiber laser platform for advanced materials processing［J］. J. Laser. Micro/Nanoeng, 2010, 5(1): 53～58

[9] M. Perry, B. Stuart, P. Banks et al.. Ultrashort-pulse laser machining of dielectric materials［J］. J. Appl. Phys., 1999, 85(9): 6803～6810

[10] B. N. Chichkov, C. Momma, S. Nolte et al.. Femtosecond, picosecond and nanosecond laser ablation of solids［J］. Appl. Phys. A: Materials Science & Processing, 1996, 63(2): 109～115

[11] S. Nolte, C. Momma, H. Jacobs et al.. Ablation of metals by ultrashort laser pulses［J］. J. Opt. Soc. Am. B, 1997, 14(10): 2716～2722

[12] 张攀政, 范薇, 汪小超等. 利用光谱滤波器实现自启动的全光纤超短脉冲掺Yb3+光纤激光器［J］. 物理学报, 2011, 60(2): 279～286

Zhang Panzheng, Fan Wei, Wang Xiaochao et al.. All-fiber ultrashort Yb3+ doped fiber laser self-started by spectral filter［J］. Acta Physics Sinica, 2011, 60(2): 279～286

[13] 王江峰, 朱海东, 李学春等. 高稳定激光二极管抽运Nd:YLF再生放大器［J］. 中国激光, 2008, 35(2): 187～190

Wang Jiangfeng, Zhu Haidong, Li Xuechun et al.. Highly stable laser diode-pumped Nd:YLF regenerative amplifier［J］. Chinese J. Lasers, 2008, 35(2): 187～190

[14] J. E. Wolfe, S. R. Qiu, C. J. Stolz. Multilayer coating laser damage stabilization by femtosecond laser machining［C］. Optical Interference Coatings, OSA, 2010. FA2

[15] J. E. Wolfe, S. R. Qiu, C. J. Stolz. Fabrication of mitigation pits for improving laser damage resistance in dielectric mirrors by femtosecond laser machining［J］. Appl. Opt., 2011, 50(9): C457～C462

熊智敏, 张攀政, 范薇, 汪小超, 黄大杰, 李学春. 不同脉宽皮秒激光对介质膜损伤修复的热影响[J]. 中国激光, 2012, 39(8): 0803005. Xiong Zhimin, Zhang Panzheng, Fan Wei, Wang Xiaochao, Huang Dajie, Li Xuechun. Heat Affection of Pico-Second Laser Irradiation with Different Widths on the Dielectric Film Damage Ablation[J]. Chinese Journal of Lasers, 2012, 39(8): 0803005.

不同脉宽皮秒激光对介质膜损伤修复的热影响

关于本站 Cookie 的使用提示

全站搜索

不同脉宽皮秒激光对介质膜损伤修复的热影响

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索