激光超高温度梯度快速定向凝固研究
[1] Yang Sen, Huang Weidong, Su Yunpeng et al.. Microstructure characteristics and microsegregation of DD2 single crystal by laser surface remelting [J]. Chinese J. Lasers (中国激光), 2001, A28(2):186~188 (in Chinese)
[2] . A. Pratt, R. N. Grugel. Microstructural response to controlled accelerations during the directional solidification of Al-7 wt.%Si alloys[J]. Mater Charact, 1993, 31: 225-231.
[3] . Z. Fu, X. G. Gen, J. G. Li et al.. Nearly rapid directional solidification and its superfine microstructure[J]. Acta Metallurgica Sinica (English Edition), 1996, 9: 497-502.
[4] . . On cellular spacing selection of Cu-Mn alloy under ultra-high temperature gradient and rapid solidification condition[J]. Scripta Mater., 2000, 42: 543-548.
[5] Huang Weidong, Mao Zhiying, Zhou Yaohe. Effects of heat flux on crystal growth under directional solidification condition [J]. Acta Metall Sinica (金属学报), 1986, 22B:240~241 (in Chinese)
[6] Wang Jiajin ed.. Laser Processing Technologies [M]. Beijing: China Metric Press, 1992. 398 (in Chinese)
[7] . Kurz, D. J. Fisher. Dendrite growth at the limit of stability tip radius and spacing[J]. Acta Metall., 1981, 29: 11-20.
杨森, 黄卫东, 刘文今, 苏云鹏, 周尧和. 激光超高温度梯度快速定向凝固研究[J]. 中国激光, 2002, 29(5): 475. 杨森, 黄卫东, 刘文今, 苏云鹏, 周尧和. Research on Laser Rapid Directional Solidification with Ultra-highTemperature Gradient[J]. Chinese Journal of Lasers, 2002, 29(5): 475.