CCD非可视区域下空间方位角检测方法

王丽莉; 曹益平; 毕泽

doi:doi:10.3788/hplpb20132509.2188

强激光与粒子束, 2013, 25 (9): 2188, 网络出版: 2013-08-28

CCD非可视区域下空间方位角检测方法

Space azimuth detection under CCD nonvision area

论文大纲

王丽莉 ^*曹益平毕泽

作者单位

四川大学电子信息学院，成都 610064

最小二乘法非可视区域空间方位角旋转矩阵法 CCD CCD least square method nonvisual area space azimuth rotation matrix method

摘要

传统单目视觉系统在测量物体空间方位角方面存在一定的局限性，只能检测出视场范围内物体的空间方位角，对于不在CCD视场范围内物体的检测难以实现。为此，提出一种旋转矩阵法来测量非可视区域下物体的空间方位角。旋转矩阵法根据张正友标定法原理，通过对合作目标上的特征点进行识别标定处理，求出合作目标旋转轴空间方位角，间接求出物体在CCD非可视区域下的空间方位角。实验表明，该方法具有一定的可行性和稳定性，采用该方法计算出的物体空间方位角的均方根误差均不高于0.06°。

Abstract

The traditional monocular vision system has certain limitations when space azimuth is measured. It is not feasible for the condition under which the object is without the scope of the CCD field. Therefore, a kind of rotation matrix method to measure the object’s space azimuth under CCD nonvision area is proposed. According to the principle of Zhang Zhengyou calibration method, the rotation matrix method, through processing with feature points on the cooperative target, works out rotation axis’s space azimuth of the cooperative target. Then the object’s space azimuth under CCD nonvisual area is indirectly obtained. Experiments indicate that the rotation matrix method has certain feasibility and stability, and the root mean square error of the object’s space azimuth calculated by this method is lower than 0.06°.

参考文献

[1] Fukui I. TV image processing to determine the position of a robot vehicle［J］. Pattern Recognition, 1981, 14(1/6):101-109.

[2] 张子淼，王鹏，孙长库.单目视觉位姿测量方法及数字仿真［J］.天津大学学报, 2011, 44(5):440-444.(Zhang Zimiao, Wang Peng, Sun Changku. Position and orientation measurement method with monocular vision and digital simulation. Journal of Tianjin University,2011,44(5):440-444)

[3] 祝世平，强锡富.用于摄像机定位的单目视觉方法研究［J］.光学学报, 2001, 21（3）:339-342.（Zhu Shiping, Qiang Xifu. The research of monocular vision used for camera calibration. Acta Optica Sinica, 2001, 21(3):339-342）

[4] 官云兰，刘绍堂，周世健,等.基于整体最小二乘的稳健点云数据平面拟合［J］.大地测量与地球动力学， 2011, 31（5）：80-83.(Guan Yunlan, Liu Shaotang, Zhou Shijian, et al. Robust plane fitting of point clouds based on total least squares. Geodesy and Geodynamics, 2011, 31(5):80-83)

[5] 毕泽，曹益平.基于特定板的空间方位角检测可靠性分析［J］.强激光与粒子束, 2011, 23(10):2603-2607.(Bi Ze, Cao Yiping. Reliability analysis of space azimuth detection based on specific board. High Power Laser and Particle Beams, 2011, 23(10):2603-2607)

[6] Zhang Zhengyou. A flexible new technique for camera calibration［J］. IEEE Trans on Pattern Analysis and Machine Intelligence, 2002, 22(11):1330-1334．

[7] 马颂德，张正友.计算机视觉［M］.北京：科学出版社， 1998:52-59.（Ma Songde, Zhang Zhengyou. Computer vision. Beijing: Science Press, 1998:52-59）

[8] 江静，张雪松.基于计算机视觉的深度估计方法［J］.光电技术应用, 2011, 26(2):51-55.(Jiang Jing, Zhang Xuesong. Depth estimation methods based on computer vision. ElectroOptic Technology Application, 2011, 26(2):51-55)

[9] 李东源，侯蓝田，闫秀生，等.传像光纤束的折衍混合耦接器［J］.中国激光, 2006, 33（9）:1210-1213.(Li Dongyuan, Hou Lantian, Yan Xiusheng, et al. Hybrid refractivediffractive coupler for image fiber bundle. Chinese Journal of Lasers, 2006, 33（9）:1210-1213)

[10] 付丽琴，王红英，张子良.钢绳芯胶带图像缺陷特征自动提取技术［J］.中国激光, 2012, 39:s109001.(Fu Liqin, Wang Hongying, Zhang Ziliang. Auto defect extraction of steelcord conveyor belt. Chinese Journal of Lasers, 2012, 39:s109001)

王丽莉, 曹益平, 毕泽. CCD非可视区域下空间方位角检测方法[J]. 强激光与粒子束, 2013, 25(9): 2188. Wang Lili, Cao Yiping, Bi Ze. Space azimuth detection under CCD nonvision area[J]. High Power Laser and Particle Beams, 2013, 25(9): 2188.

CCD非可视区域下空间方位角检测方法

关于本站 Cookie 的使用提示

全站搜索

CCD非可视区域下空间方位角检测方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索