脉冲形成线用CaO-TiO2-Al<sub>2</sub>O<sub>3</sub>基介质陶瓷介电性能

设计了一种脉冲形成线用新型CaO-TiO2-Al2O3基介质陶瓷体系，采用传统固相法通过优化组分和制备工艺，调控材料的微结构，获得了介电性能优异的介质陶瓷。其介电常数在15~35之间可调，介电损耗小于0.002，频率稳定性好。在厚度为1 mm时，介电强度高达50 kV/mm。研究了厚度对CaO-TiO2-Al2O3基介质陶瓷介电强度的影响规律，当厚度从1 mm减小到0.1 mm时，介电强度呈非线性增大，从50 kV/mm(1 mm厚样品)提高到92 kV/mm(0.1 mm厚样品)，可见，CaO-TiO2-Al2O3基介质陶瓷的电击穿与其机械损坏具有相似性。结合CaO-TiO2-Al2O3基介质陶瓷的化学组分和微观结构，CaO-TiO2-Al2O3基介质陶瓷优越的电击穿特性可以用弱点击穿理论解释。

Abstract

A new CaO-TiO2-Al2O3 based dielectric ceramic system is designed for pulse forming line application. The dielectric ceramic is prepared by traditional solid state method and its microstructure was controlled by optimizing the composition and preparation process. The dielectric ceramic exhibits an excellent dielectric properties. The frequency stability of the dielectric constant is good. The dielectric loss is less than 0.002 in a wide frequency range. The electric strength is up to 50 kV/mm (1 mm in thickness). The influence of thickness on the electric strength of CaO-TiO2-Al2O3 based dielectric ceramics is studied. With the thickness decreasing from 1 mm to 0.1 mm, the dielectric breakdown strength increases nonlinearly from 50 kV/mm to 92 kV/mm. So it can be seen that the dielectric breakdown of the CaO-TiO2-Al2O3 dielectric ceramics is similar to their mechanical damage. Based on the chemical compositions and the microstructures, the dielectric breakdown mechanism of CaO-TiO2-Al2O3 dielectric ceramics can be explained by the weak breakdown theory.

参考文献

[1] Sampayan S, Caporaso G, Chen Y-J, et al. Development of compact pulsed power for the dielectric wall accelerator［C］//Power Modulator Symposium. 2006, 14(4): 411-414.

[2] 邓建军，王勐，谢卫平，等.面向Z箍缩驱动聚变能源需求的超高功率重复频率驱动器技术［J］.强激光与粒子束, 2014, 26: 100201.(Deng Jianjun, Wang Meng, Xie Weiping, et al. Super-power repetitive Z-pinch driver for fusion-fission reactor. High Power Laser and Particle Beams, 2014, 26: 100201)

[3] Caporaso G J , Chen Y-J, Sampayan S. The dielectric wall accelerator［J］. Reviews of Accelerator Science and Technology, 2009, 2(1): 253-263.

[4] Rossi J O, Castro P, Roybal M, et al. HV energy store in organic composite dielectrics for compact pulsed power［C］//IEEE International Power Modulators and High Voltage Conference. 2008: 548-551.

[5] Dang Z M, Yuan J K, Yao S H, et al. Flexible nanodielectric materials with high permittivity for power energy storage［J］. Advanced Material, 2013, 25(44): 6334-6365.

[6] Chen Jichun, Zhang Yong, Deng Changsheng, et al. Improvement in the microstructures and dielectric properties of barium strontium titante glass-ceramics by AlF3/MnO2 addition［J］. Journal of the American Ceramic Society, 2009, 92(8): 1863-1866.

[7] Dong Guixia, Ma Shuwang, Du Jun, et al. Dielectric properties and energy storage density in ZnO-doped Ba0.3Sr0.7TiO3 ceramics［J］. Ceramics International, 2009, 35(5): 2069-2075.

[8] 苗纪远.ZnO-TiO2介质陶瓷的制备与介电性能研究［D］.武汉: 武汉理工大学, 2012: 22-37.(Miao Jiyuan. ZnO-TiO2 ceramics preparation and dielectric properties. Wuhan: Wuhan University of Technology, 2012: 22-37)

[9] 刘毅.玻璃陶瓷固态脉冲形成线研究［D］.绵阳: 中国工程物理研究院, 2013: 11-22.(Liu Yi. Solid state pulse forming line of glass ceramics. Mianyang: China Academy of Engineering Physics, 2013: 11-22)

[10] 陈莹,张文斌,董显林,等.一种大尺寸介质陶瓷材料及其制备方法和应用: 中国, 201310675671.3［P］. 2014-09-03.(Chen Ying, Zhang Wenbin, Dong Xianlin, et al. A large size dielectric ceramic material and its preparation methods and applications: China, 201310675671.3. 2014-09-03)

[11] 谌怡，刘毅，陈莹，等.介质壁加速器用固态脉冲形成线设计与实验［J］.强激光与粒子束， 2014, 26: 105102.(Chen Yi, Liu Yi, Chen Ying, et al. The dielectric wall accelerator with solid-state pulse forming line design and experiment. High Power Laser and Particle Beams, 2014, 26: 105102)

[12] Neusel C, Schneider G A. Size-dependence of the dielectric breakdown strength from nano to millimeter scale［J］. Journal of the Mechanics and Physics of Solids, 2014, 63(2): 201-213.

陈莹, 董显林, 张文斌, 李鑫, 江峰, 谌怡, 刘毅, 夏连胜, 王根水, 石金水. 脉冲形成线用CaO-TiO2-Al₂O₃基介质陶瓷介电性能[J]. 强激光与粒子束, 2016, 28(4): 045002. Chen Ying, Dong Xianlin, Zhang Wenbin, Li Xin, Jiang Feng, Shen Yi, Liu Yi, Xia Liansheng, Wang Genshui, Shi Jinshui. Dielectric properties of CaO-TiO2-Al₂O₃ based ceramics for pulse forming line[J]. High Power Laser and Particle Beams, 2016, 28(4): 045002.

脉冲形成线用CaO-TiO2-Al₂O₃基介质陶瓷介电性能

关于本站 Cookie 的使用提示

全站搜索

脉冲形成线用CaO-TiO2-Al2O3基介质陶瓷介电性能

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

脉冲形成线用CaO-TiO2-Al₂O₃基介质陶瓷介电性能