中国激光, 2011, 38 (4): 0406002, 网络出版: 2011-03-31   

准分子激光快速诱导聚偏氟乙烯材料导电层的研究

Rapid Fabrication of Conducting Ploy (Vinylidene Fluoride) Surfaces Using a 248 nm Excimer Laser
作者单位
北京工业大学激光工程研究院, 北京 100124
摘要
采用KrF准分子激光直写刻蚀技术在聚偏氟乙烯(PVDF)材料表面引入刻蚀缺陷,利用刻蚀点缺陷和线缺陷的活性中心作用实现了聚偏氟乙烯表面导电层的快速制备。实验结果表明,通过激光刻蚀在该材料表面产生的刻蚀点或刻蚀线均可起到活性中心的作用,轻易地控制导电层的形成,降低了激光改性阈值,低阈值实现了导电层快速制备的目的。通过激光扫描共聚焦显微镜(LSCM)及扫描电镜(SEM)观察,刻蚀缺陷边缘产生类导电层的二维规整网络微结构,为导电层的初期形式。激光刻蚀过程中的激光热交联反应及激光辐照交联反应的交替作用是聚偏氟乙烯导电层快速产生并大面积形成的主要原因。
Abstract
A rapid fabrication method for conducting poly(vinylidene fluoride) by creating active centre using KrF excimer laser direct etching technique is demonstrated. Study shows that the etching point-defects and line-defects perform active centre function for facilely controlling conducting layer when laser irradiation decreases the laser threshold. The results of laser scanning confocal microscope(LSCM) and scanning electron microscope(SEM), indicate that the 2D net-like microstructures surround the defects are the precursor of conducting layer, which significantly affect the velocity of preparation. The effect of laser thermal cross-linking reaction and laser irradiation cross-linking reaction together contributes to the rapid formation of great conducting layer.
参考文献

[1] . Gangopadhyay, A. De. Conducting polymer nanocomposites:A brief overview[J]. Chem. Mater., 2000, 12(3): 608-622.

[2] . A. Turnbull, P. Andrew, W. L. Barnes et al.. Operating characteristics of a semiconducting polymer pumped by a microchip laser[J]. Appl. Phys. Lett., 2003, 82(3): 313-315.

[3] . 导电聚合物超薄膜的制备及性能表征[J]. 物理化学学报, 2007, 23(4): 484-488.

    . Preparation and properties of conducting polymeric ultrathin films[J]. Acta Phys. Chim. Sin., 2007, 23(4): 484-488.

[4] . L. Ji, Y. J. Jiang. Increasing the electrical conductivity of poly(vinylidened fluoride) by KrF excimer laser irradiation[J]. Appl. Phys. Lett., 2006, 89(22): 221103.

[5] 邢晓波, 蔡继业, 王宇清 等. 基于聚合物纳米光纤的微光子学器件及其应用[J]. 激光与光电子学进展, 2010, 47(10): 100601

    Xing Xiaobo, Cai Jiye, Wang Yuqing et al.. Polymer nanofiber based microphotomic devices and applications[J]. Laser & Optoelectronics Progress, 2010, 47(10): 100601

[6] . Bajpai, P. G. He, L. M. Dai. Conducting-polymer microcontainers: Controlled syntheses and potential applications[J]. Adv. Funct. Mater., 2004, 14(2): 145-151.

[7] . R. Tumbleston, D. H. Ko, E. T. Samulski et al.. Absorption and quasiguided mode analysis of organic solar cells with photomic crystal photoactive layers[J]. Opt. Express, 2009, 17(9): 7670-7681.

[8] H. D. Tran, D. Li, R. B. Kaner. One-dimensional conducting polymer nanostructures: bulk synthesis and applications[J]. Adv. Mater., 2009, 21(14-15): 1487~1499

[9] 温昌礼, 季家镕, 窦文华 等. 集成电路用聚合物光波导材料[J]. 激光与光电子学进展, 2009, 46(7): 35~40

    Wen Changli, Ji Jiarong, Dou Wenhua et al.. Polymer material for optical waveguide used in integrated circuit[J]. Laser & Optoelectronics Progress, 2009, 46(7): 35~40

[10] W. K. Roth, V. I. Krinichnyi, M. Schrodner et al.. Electronic properties of laser modified poly(bis-alkylthio-acetylene)[J]. Synthetic Met., 1999, 101(1-3): 832~833

[11] . Ball, H. M. Phillips, D. L. Callahan et al.. Percolative metal-insulator-transition in excimer-laser irradiated polyimide[J]. Phys. Rev. Lett., 1994, 73(15): 2099-2102.

[12] E. Arenholz, J. Heitz, M. Wagner et al.. Laser-induced surface modification and structure formation of polymers[J]. Appl. Surf. Sci., 1993, 69(1-4): 16~19

[13] . Y. Qin, X. Y. Huang, D. K. Wang et al.. Formation of conducting layers on excimer-laser-irradiated polyimide film surfaces[J]. Surf. Interface Anal., 2000, 29(8): 514-518.

[14] 刘莹, 蒋毅坚. 激光辐照制备高导电聚偏氟乙烯聚合物的研究[J]. 中国激光, 2010, 37(4): 1122~1126

    Liu Ying, Jiang Yijian. Preparation of high-grade electrical conductivity on polyvinylidene fluoride films by KrF excimer laser irradiation[J]. Chinese J. Lasers, 2010, 37(4): 1122~1126

[15] . W. Choi, S. M. Jo, W. S. Lee et al.. An electrospun poly(vinylidene fluoride) nanofibrous membrane and its battery applications[J]. Adv. Mater., 2003, 15(23): 2027-2032.

[16] . 聚偏氟乙烯结晶过程的研究[J]. 化工新型材料, 2009, 37(6): 112-114.

    . . Research on the process of PVDF crystallizing[J]. New Chem. Mater., 2009, 37(6): 112-114.

[17] . Bityurin, E. Arenholz, N. Armold et al.. Laser-induced structure formation on stretched polymer foils[J]. Phys. Rev. E, 2007, 75(4): 041603.

[18] . Lzumi, S. Kawanishi, S. Hara et al.. Irradiation effects of excimer laser light on poly(vinylidene fluoride) (PVdF) film[J]. B. Chem. Soc. Jap., 1998, 71(11): 2721-2725.

[19] 章琳, 楼祺洪, 魏运荣 等. 193 nm和308 nm准分子激光对聚合物刻蚀特性的比较[J]. 中国激光, 2002, A29(1): 25~28

    Zhang Lin, Lou Qihong, Wei Yunrong et al.. Copmarison of etching characteristics of polymers by 193 nm and 308 nm excimer laser radiation[J]. Chinese J. Lasers, 2002, A29(1): 25~28

[20] 付博, 张翠娟, 罗飞 等. 脉冲激光对绝缘体上硅材料的损失机理研究[J]. 光学学报, 2010, 30(5): 1413~1417

    Fu Bo, Zhang Cuijuan, Luo Fei et al.. Studies on pulsed laser induced damage of silicon on insulator material[J]. Acta Optica Sinica, 2010, 30(5): 1413~1417

[21] . E. A. Pedder, A. S. Holmes, P. E. Dyer. Improved model for the angular dependence of excimer laser ablation rates in polymer materials[J]. Appl. Phys. Lett., 2009, 95(17): 174105.

[22] . Tada, H. Masuhara. Nanometer-nanosecond dynamics in laser-induced expansion/contraction and ablation of polymer films[J]. J. India Chem. Soc., 2010, 87(1): 65-83.

[23] 刘爱华, 张运海, 满宝元. 聚四氟乙烯材料表面激光改性与刻蚀[J]. 光学学报, 2006, 26(7): 1073~1077

    Liu Aihua, Zhang Yunhai, Man Baoyuan. Surface modification and ablation of polytetrafluorethylene by excimer laser irradiation[J]. Acta Optica Sinica, 2006, 26(7): 1073~1077

刘莹, 蒋毅坚. 准分子激光快速诱导聚偏氟乙烯材料导电层的研究[J]. 中国激光, 2011, 38(4): 0406002. Liu Ying, Jiang Yijian. Rapid Fabrication of Conducting Ploy (Vinylidene Fluoride) Surfaces Using a 248 nm Excimer Laser[J]. Chinese Journal of Lasers, 2011, 38(4): 0406002.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!