[1] 余龙红. 催化裂化装置管线散热损失估算及分析[J]. 炼油技术与工程, 2004, 34(11): 38-41.

    YU Longhong. Evaluation and analysis of pipeline heat loss in fcc unit[J]. Petroleum Refinery Engineering, 2004, 34(11): 38-41.

[2] 孙晓刚, 李云红. 红外热像仪测温技术发展综述[J]. 激光与红外, 2008, 38(2): 101-104.

    SUN Xiaogang, LI Yunhong. Review of the development of temperature measurement technology with infrared thermal imger[J]. Laser and Infrared, 2008, 38(2): 101-104.

[3] 张健, 杨立, 刘慧开. 环境高温物体对红外热像仪测温误差的影响[J]. 红外技术, 2005, 27(5): 419-422.

    ZHANG Jian, YANG Li, LIU Huikai. Effect of environment object on infrared temperature measurement[J]. Infrared Technology, 2005, 27(5): 419-422.

[4] Nina P Umnyakova. Influence of surface emissivity on the heat loss through the wall behind the heater[J]. Procedia Engineering, 2015, 148: 797-802.

[5] A K A Shati, S G Blakey, S B M Beck. The effect of surface roughness and emissivity on radiator output[J]. Energy and Building, 2011, 43: 400-406.

[6] 白敬晨, 于庆波, 胡贤忠, 等. 基于红外热像仪的物体表面发射率测 量方法[J]. 东北大学学报, 2013, 34(12): 1747-1750.

    BAI Jingchen, YU Qingbo, HU Xianzhong. et al. Surface emissivity measurement technique based on infrared thermal imager[J]. Journal of Northeastern University, 2013, 34(12): 1747-1750.

[7] 张澎, 郭玲, 王琦, 等. 基于标准黑体的物体表面发射率计算方法研 究[J]. 红外, 2014(9): 6-10.

    ZHANG Peng, GUO Ling, WANG Qi. et al. Study of calculation method about surface emissivity of objects based on standard blackbody[J]. Infrared, 2014(9): 6-10.

[8] 张彤, 代晓东, 陈春生, 等. 非全视场条件下目标红外发射率的测试 和计算[J]. 红外与激光工程, 2015, 44(1): 1-5.

    ZHANG Tong, DAI Xiaodong, CHEN Chunsheng. et al. Measurement and calculation of infrared emissivity of target with non-full field of view[J]. Infrared and Laser Engineering, 2015, 44(1): 1-5.

[9] WANG Hui, CHEN Dejiang, WANG Guolin, et al. Measurement technology for material emissivity under high temperature dynamic heating conditions[J]. Measurement, 2013, 46(10): 4023-4031.

[10] De Campo. Emissivity measurements on aeronautical alloys[J]. Journal of Alloys and Compounds, 2010, 489(2): 482-487.

[11] 齐宏, 牛春洋, 阮立明, 等. 不透明材料波段法向发射率在线测量方 法[J]. 实验技术与管理, 2014, 31(12): 31-34.

    QI Hong, NIU Chunyang, RUAN Liming. et al. Research on online measurement method of opaque material band normal emissivity. Experimental Technology and Management, 2014, 31(12): 31-34.

[12] 刘华, 艾青, 夏新林, 等. 毫米级非均匀粗糙表面红外发射率测量[J]. 工程热物理学报, 2013, 34: 317-319.

    LIU Hua, AI Qing, XIA Xinlin, et al. Measurement of infrared emissivity of surfaces with non-uniform millimeter-scale roughness[J]. Journal of Engineering Thermophysics, 2013, 34: 317-319.

[13] 魏巍, 赵卉. 金属材料表面发射率测量方法研究[J]. 工业计量, 2015, 25(6): 55-57.

    WEI Wei, ZHAO Hui. Research on measurement method of surface emissivity of metallic materials[J]. Industrial Measurement, 2015, 25(6): 55-57.

[14] 宋健, 郝小鹏, 原遵东, 等. 基于控制环境辐射的黑体辐射源发射率 测量方法研究[J]. 中国激光, 2015, 42(9): 23-26.

    SONG Jian, HAO Xiaopeng, YUAN Zundong. et al. Blackbody source emissivity measurement method based on controlling surroundings radiation[J]. Chinese Journal of Lasers, 2015, 42(9): 23-26.

[15] 刘连伟, 杨淼淼, 樊宏杰, 等. 一种表面发射率的测量方法研究[J]. 激光与红外, 2014, 44(2): 152-157.

    LIU Lianwei, YANG Miaomiao, FAN Hongjie, et al. Method for surface emissivity measurement, Laser and Infrared, 2014, 44(2): 152-157.

[16] 杨立. 红外热像仪测温计算与误差分析[J]. 红外技术, 1999, 21(4): 20-24.

    YANG Li. Calculation and error analysis of temperature measurement using thermal imager[J]. Infrared Technology, 1999, 21(4): 20-24.

[17] 吴燕燕, 罗铁苟, 黄杰, 等. 基于红外热像仪测温原理的物体表面发 射率计算[J]. 直升机技术, 2011(4): 25-30.

    WU Yanyan, LUO Tiegou, HUANG Jie, et al. Calculation of object emissivity based on measuring temperature principle of thermal imager[J]. Helicopter Technique, 2011(4): 25-30.