搅拌法制备聚合物微球中油水相对壁厚的影响
[1] Tabak M, Hammer J M, Glinsky M E, et al. Ignition and high gain with ultrapowerful lasers[J]. Physics of Plasmas, 1994, 1(5): 1626-1634.
[2] Atzeni S, Schiavi A, Honrubia J J, et al. Fast ignitor target studies for the HiPER project[J]. Physics of Plasmas, 2008, 15: 056311.
[3] 唐永建,张林,吴卫东,等.ICF 靶材料和靶制备技术研究进展[J].强激光与粒子束, 2008, 20(11): 1773-1786.(Tang Yongjian, Zhang Lin, Wu Weidong, et al. Research progress on ICF target materials and target fabrication technology. High Power Laser and Particle Beam, 2008, 20(11): 1773-1786)
[4] Watari T, Azechi H, Nakai M, et al. Experimental investigation to demonstrate impact fast ignition scheme[J]. Journal of Physics: Conference Series, 2010, 244: 022071.
[5] Nagai K, Yang H, Norimatsu T, et al. Fabrication of aerogel capsule, bromine-doped capsule, and modified gold cone in modified target for the Fast Ignition Realization Experiment (FIREX) Project[J]. Nuclear Fusion, 2009, 49: 095028.
[6] Kubo U, Tsubakihara H. Development of a coating technique for inertial confinement fusion plastic targets[J]. Journal of Vacuum Science and Technology, 1986, 4(3): 1134-1137.
[7] Takagi M, Norimatsu T, Yamanaka T, et al. Development of deuterated polystyrene shells for laser fusion by means of a density-matched emulsion method[J]. Journal of Vacuum Science and Technology, 1991, 9(4): 2145-2148.
[8] 张林,游丹,高党忠,等. ICF氘代固体靶的研制[J].强激光与粒子束, 1999, 11(5): 605-608.(Zhang Lin, You Dan, Gao Dangzhong, et al. Fabrication of deuterated solid ICF target. High Power Laser and Particle Beams, 1999, 11(5): 605-608)
[10] Mishra K K, Khardekar R K, Singh R, et al. Fabrication of polystyrene hollow microspheres as laser fusion targets by optimized density-matched emulsion technique and characterization[J]. Pramana-Journal of Physics, 2002, 59(1): 113-131.
刘梅芳, 刘一杨, 史瑞廷, 陈素芬, 苏琳, 李婧, 李洁, 李波, 张占文. 搅拌法制备聚合物微球中油水相对壁厚的影响[J]. 强激光与粒子束, 2013, 25(6): 1370. 刘梅芳, 刘一杨, 史瑞廷, 陈素芬, 苏琳, 李婧, 李洁, 李波, 张占文. Effect of oil phase and water phase on wall thickness of polymer[J]. High Power Laser and Particle Beams, 2013, 25(6): 1370.