脉冲激光切向整形径向修锐青铜金刚石砂轮

对脉冲光纤激光切向整形和径向修锐青铜结合剂金刚石砂轮技术进行了理论分析和试验研究。理论分析了激光切向整形和径向修锐青铜结合剂金刚石砂轮的机理，总结提出了决定脉冲激光修整效果的4个关键工艺参数: 激光功率密度、激光光斑重叠率、激光扫描轨迹线重叠率及激光循环扫描次数。试验研究了这4个工艺参数对修整后砂轮表面磨粒石墨化变质层、磨粒磨削刃锋利程度、结合剂表面平整度及磨粒出刃高度的影响规律，并分别找到了在本试验条件下的理想值。

Abstract

The technique of pulsed fiber-laser tangential profiling and radial sharpening of bronze-bonded diamond grinding wheels is studied theoretically and experimentally. The mechanisms for laser tangential profiling and radial sharpening of bronze-bonded diamond wheels are theoretically analyzed, and the four key processing parameters that determine the results of laser truing and dressing, including laser power density, overlap ratio of laser spot, laser scanning track line overlap ratio, and number of laser scanning cycles, are summarized and proposed. Furthermore, the effects of these four key parameters on graphitization-damaged layer of grains, sharpness of cutting edge graims, surface smoothness of bond, and mean protrusion height of the diamond grains after laser processing are experimentally studied. The ideal values of the laser power density, overlap ratio of laser spot overlap ratio, laser scanning track line, and number of laser scanning cycles are found under current experimental conditions.

参考文献

[1] Deng H, Chen G Y, Zhou C, et al.. Processing parameter optimization for the laser dressing of bronze-bonded diamond wheels[J]. Applied Surface Science, 2014, 290: 475-481.

[2] Babu N R, Radhakrishnan V, Murti Y V G S. Investigations on laser dressing of grinding wheels—part I: preliminary study[J]. Journal of Monufactuing Science and Engineering for Industry, 1989, 111(3): 244-252.

[3] Babu N R, Radhakrishnan V. Investigations on laser dressing of grinding wheels—part II: grinding performance of a laser dressed aluminum oxide wheel[J]. Journal of Manufactuning Science on Engineering for Industry, 1989, 111(3): 253-261.

[4] 陈根余, 邓辉, 李宗根, 等. 脉冲光纤激光修锐青铜金刚石砂轮[J]. 中国激光, 2013, 40(7): 0703002.

Chen Genyu, Deng Hui, Li Zonggen, et al.. Dressing of bronze-bonded diamond grinding wheels using a pulsed fiber laser[J]. Chinese J Lasers, 2013, 40(7): 0703002.

[5] Chen G Y, Mei L F, Zhang B, et al.. Experiment and numerical simulation study on laser truing and dressing of bronze-bonded diamond wheel[J]. Optics and Lasers in Engineering, 2010, 48(3): 295-304.

[6] Walter C, Rabiey M, Warhanek M, et al.. Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser[J]. CIRP Annals-Manufacturing Technology, 2012, 61(1): 279-282.

[7] Rabiey M, Walter C, Kuster F, et al.. Dressing of hybrid bond CBN wheels using short-pulse fiber laser[J]. Strojniki Vestnik-Journal of Mechanical Engineering, 2012, 58(7-8): 462-469.

[8] Dold C, Transchel R, Rabiey M, et al.. A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1): 363-366.

[9] Rabiey M, Dold C, Transchel R, et al.. Influence of picosecond laser touch dressing of electroplated diamond wheels on the dressing of SiC vitrified bond wheel[J]. Advanced Materials Research, 2011, 325: 189-194.

[10] Witzendorff P V, Moalem A, Kling R, et al.. Laser dressing of metal bonded diamond blades for cutting of hard brittle materials[J]. Journal of Laser Applications, 2012, 24(2): 022002.

[11] Witzendorff P V, Stompe M, Moalem A, et al.. Dicing of hard and brittle materials with on-machine laser-dressed metal-bonded diamond blades[J]. Precision Engineering, 2014, 38(1): 162-167.

[12] Wegener K, Hoffmeister H W, Karpuschewski B, et al.. Conditioning and monitoring of grinding wheels[J]. CIRP Annals-Manufacturing Technology, 2011, 60(2): 757-777.

邓辉, 陈根余, 周聪, 周兴才. 脉冲激光切向整形径向修锐青铜金刚石砂轮[J]. 中国激光, 2014, 41(11): 1103003. Deng Hui, Chen Genyu, Zhou Cong, Zhou Xingcai. Pulsed Laser Tangential Profiling and Radial Sharpening of Bronze-Bonded Diamond Grinding Wheels[J]. Chinese Journal of Lasers, 2014, 41(11): 1103003.

脉冲激光切向整形径向修锐青铜金刚石砂轮

关于本站 Cookie 的使用提示

全站搜索

脉冲激光切向整形径向修锐青铜金刚石砂轮

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索