双光子制备的微结构及其装配的研究
[1] Zhu Wei, Li Jinxin, Leong Y, et al. 3D-printed artificial microfish [J]. Advanced Materials, 2015 , 27(30): 4411-4417.
[2] Xiong Wei, Liu Ying, Jiang Lijia, et al. Laser-directed assembly of aligned carbon nanotubes in three dimensions for Multifunctional Device Fabrication [J]. Advanced Materials, 2016, 28(10): 2002-2008.
[3] 邢昕, 袁伟, 李泽汉, 等. 飞秒激光作用下啁啾镜膜层内损伤相关动力学[J]. 红外与激光工程, 2017, 46(11): 1106005.
[4] Tomazio N B, Boni L D, Mendonca C R. Low threshold Rhodamine doped whispering gallery mode microlasers fabricated by direct laser writing[J]. Scientific Reports, 2017, 7(1): 8559.
[5] 蒋中伟, 袁大军, 祝安定,等.双光子三维微细加工技术及实验系统的开发[J]. 光学 精密工程, 2003, 11(3): 234-238.
[6] Villangca M J, Palima D, Ba 觡as A R, et al. Light-driven micro-tool equipped with a syringe function [J]. Light Science & Applications, 2016, 5(9): e16148.
[7] 程萍, 位迪, 吴本科,等.可降解心脏支架的飞秒激光精密加工[J]. 光学 精密工程, 2014, 22(1): 63-68.
[8] Wei Xiong, Zhou Yunshen, Hou Wenjia, et al. Direct writing of graphene patterns on insulating substrates under ambient conditions [J]. Scientific Reports, 2014 , 4(7499): 4892.
[9] Zhu Y, Murali S, Cai W, et al. Graphene and graphene oxide: synthesis, properties, and applications[J]. Cheminform, 2010, 22(46): 5226-5226.
[10] Chung S E, Park W, Shin S, et al. Guided and fluidic self-assembly of microstructures using railed microfluidic channels [J]. Nature Materials, 2008, 7(7): 581-587.
[11] K 觟hler J, Ksouri S I, ESEN C, et al. Optical screw-wrench for microassembly[J]. Microsystems & Nanoengineering, 2017, 3: 16083.
[12] 谢世伟, 肖啸, 谭建军,等. 基于石墨烯基电极染料敏化太阳能电池的研究进展[J]. 中国光学, 2014, 7(1): 47-56.
[13] Kaplas T, Matikainen A, Nuutinen T, et al. Scalable fabrication of the graphitic substrates for graphene-enhanced Raman spectroscopy[J]. Scientific Reports, 2017, 7(1): 8561.
[14] 陈勰宇, 田震. 石墨烯太赫兹波动态调制的研究进展[J]. 中国光学, 2017, 10(1): 86-97.
[15] 陈恺, 祝连庆, 娄小平, 等. 石墨烯锁模的全保偏光纤激光器[J]. 红外与激光工程, 2017, 46(10): 1005004.
夏锦涛, 张超, 陶卫东, 王刚. 双光子制备的微结构及其装配的研究[J]. 红外与激光工程, 2019, 48(3): 0306007. Xia Jintao, Zhang Chao, Tao Weidong, Wang Gang. Study on microstructure of two-photon fabrication and assembly[J]. Infrared and Laser Engineering, 2019, 48(3): 0306007.