[1] MOSES E I. National Ignition Facility: 1.8-MJ 750-TW ultraviolet laser［C］. Lasers and Applications in Science and Engineering, International Society for Optics and Photonics, 2004: 13-24.

[2] FLEUROT N, CAVAILLER C, BOURGADE J L. The Laser Megajoule (LMJ) project dedicated to inertial confinement fusion: development and construction status［J］. Fusion Engineering and Design, 2005, 74(1): 147-154.

[3] PENG H, ZHANG X, WEI X F, et al.. Design of 60-kJ SG-III laser facility and related technology development［C］. 26th European Conference on Laser Interaction with Matter (ECLIM 2000), International Society for Optics and Photonics, 2001: 98-103.

[4] DEMOS S G, NEGRES R A, RAMAN R N, et al.. Material response during nanosecond laser induced breakdown inside of the exit surface of fused silica［J］. Laser & Photonics Reviews, 2013, 7(3): 444-452.

[5] LIU H, YE X, ZHOU X, et al.. Subsurface defects characterization and laser damage performance of fused silica optics during HF-etched process［J］. Optical Materials, 2014, 36(5): 855-860.

[6] MATTHEWS M J, YANG S T, SHEN N, et al. Micro‐shaping, polishing, and damage repair of fused silica surfaces using focused infrared laser beams［J］. Advanced Engineering Materials, 2015, 17(3): 247-252.

[7] BUDE J, MILLER P, BAXAMUSA S, et al.. High fluence laser damage precursors and their mitigation in fused silica［J］. Optics Express, 2014, 22(5): 5839-5851.

[8] HONGJIE L, JIN H, FENGRUI W, et al.. Subsurface defects of fused silica optics and laser induced damage at 351 nm［J］. Optics Express, 2013, 21(10): 12204-12217.

[9] YANG L, XIANG X, MIAO X X, et al.. Influence of oil contamination on the optical performance and laser induced damage of fused silica［J］. Optics & Laser Technology, 2015, 75: 76-82.

[10] LAURENCE T A, BUDE J D, LY S, et al.. Extracting the distribution of laser damage precursors on fused silica surfaces for 351 nm, 3 ns laser pulses at high fluences (20-150 J/cm2)［J］. Optics Express, 2012, 20(10): 11561-11573.

[11] SURATWALA T I, MILLER P E, BUDE J D, et al.. HF‐based etching processes for improving laser damage resistance of fused silica optical surfaces［J］. Journal of the American Ceramic Society, 2011, 94(2): 416-428.

[12] CATRIN R, TAROUX D, CORMONT P, et al.. MRF, ELSM and STED: tools to study defects in fused silica optics［J］. SPIE, 2013, 8885: 88852D-88852D-7.

[13] DUAN W. The Effect of Surface Processing Methods on the Laser Induced Damage Threshold of Fused Silica［D］. University of Central Lancashire, 2014.

[14] 苗心向, 袁晓东, 程晓锋, 等. 表面污染物诱导熔石英损伤的热力学数值模拟［J］. 激光技术, 2011, 35(2): 285-288.

    MIAO X X, YUAN X D, CHENG X F, et al.. Thermal stress simulation of laser induced damage of fused silica by contamination on the surface［J］. Laser Technology, 2011, 35(2): 285-288. (in Chinese)

[15] 舒勇. 熔石英元件损伤可控高效阈值提升工艺关键技术研究［D］.长沙: 国防科技大学, 2013.

    SHU Y. Study on the Key Technique of High-efficiency Low-damage Fabrication for High-performance Ultra-violet Laser Irradiated Fused Silica Optics ［D］. Changsha: National University of Defense Technology, 2013. (in Chinese)

[16] CATRIN R, NEAUPORT J, TAROUX D, et al.. Magnetorheological finishing for removing surface and subsurface defects of fused silica optics［J］. Optical Engineering, 2014, 53(9): 092010-092010.