基于导热反问题的复合材料内壁不规则缺陷Ansys二次开发红外诊断识别
[1] 李国华, 吴立新, 吴淼, 等. 红外热像技术及其应用的研究进展[J]. 红外与激光工程, 2004, 33(3): 227-230.
[2] Lv Shigui, Yang Li, Yang Qian. Research on the applications of infrared technique in the diagnosis and prediction of diesel engine exhaust fault[J]. Journal of Thermal Science, 2011, 20(2): 189-194.
[3] Maldague X P. Theory and Practice of Infrared Technology for Nondestructive Testing[M]. US: John Wiley & Sons Inc, 2001.
[4] 戴景民, 汪子君. 红外热成像无损检测技术及其应用现状[J]. 自动化技术与应用, 2007, 26(1): 1-7.
Dai Jingmin, Wang Zijun. Infrared thermography nondestructives testing technology and its applications[J].Techniques of Automation and Application, 2007, 26(1): 1-7. (in Chinese)
[5] 于慧, 关荣华. 红外技术定量诊断设备内部缺陷可行性的理论证明[J]. 红外与激光工程, 2002, 31(3): 229-232.
[6] 李斌, 刘林华. 一种基于边界元离散的导热问题几何边界识别算法[J]. 中国电机工程学报, 2008, 28(20): 38-43.
Li Bin, Liu Linhua. An algorithm for geometry boundary identification of heat conduction problem based on boundary element discretization[J]. Proceedings of the CSEE, 2008, 28(20): 38-43. (in Chinese)
[7] Fan Chunli, Zhang Mingxing, Hu Shuangxi. Identification of plate surface geometry: a numerical and experimental study[J]. Numerical Heat Transfer, Part B, 2012, 61(1): 50-70.
[8] 吕事桂, 杨立, 范春利, 等. 基于对面红外检测的缺陷混沌-LM混合识别算法[J]. 工程热物理学报, 2013, 34(7): 1352-1356.
Lv Shigui, Yang Li, Fan Chunli, et al. Chaos-LM hybrid algorithm for the defect identification with opposite-side thermographic testing[J]. Journal of Engineering Thermophysics, 2013, 34(7): 1352-1356. (in Chinese)
[9] Huang C H, Ozisik M N. Inverse problem of determining unknown wall heat flux in laminar flow through a parallel plate Duct[J]. Numerical Heat Transfer. Part A, 1992, 21(1): 55-70.
[10] Huang C H, Chao B H. An inverse geometry problem in identifying irregular boundary configurations[J]. International Journal of Heat and Mass Transfer, 1997, 40(9): 2045-2053.
[11] 王崧, 刘丽娟, 董春敏, 等. 有限元分析ANSYS理论与应用(第三版)[M]. 北京: 电子工业出版社, 2008.
Wang Song, Liu Lijuan, Dong Chunmin, et al. Finite Element Analysis Theory and Application with Ansys(Third edition)[M]. 3th ed. Beijing: Publishing House of Electronics Industry, 2008. (in Chinese)
[12] Inagki T, Ishii T, Iwamoto T. On the NDT and E for the diagnosis of defects using infrared thermography[J]. NDT & E International, 1999, 32(5): 247-257.
[13] 范春利, 孙丰瑞, 杨立. 红外系统的定量缺陷识别算法研究[J]. 电子器件, 2006, 29(3): 878-882.
Fan Chunli, Sun Fengrui, Yang Li. A new quantitative thermographic identification method of subsurface defect for infrared sensor system[J]. Journal of Electron Devices, 2006, 29(3): 878-882. (in Chinese)
吕事桂, 阳再清, 丛书全. 基于导热反问题的复合材料内壁不规则缺陷Ansys二次开发红外诊断识别[J]. 红外与激光工程, 2016, 45(12): 1204002. Lv Shigui, Yang Zaiqing, Cong Shuquan. Secondary development of Ansys to the infrared diagnosis of irregular inner-wall surface defect of complex material based on inverse heat conduction problem[J]. Infrared and Laser Engineering, 2016, 45(12): 1204002.