钢/镁异种金属搭接添加Sn 箔激光熔焊接头的微观组织分析

采用光纤激光器作为焊接热源的激光熔焊工艺对双相钢DP600和变形镁合金AZ31进行添加Sn箔的搭接焊研究。通过调整焊接参数获得最佳焊接成形，采用卧式金相显微镜、带有能谱仪(EDS)和电子背散射衍射(EBSD)探头的扫描电镜(SEM)和X 射线衍射仪(XRD)等观察焊接接头的微观组织、相分布、晶粒大小、元素分布和相结构组成。结果表明，添加Sn 箔激光熔焊是一种适用于Fe 和Mg 异种材料连接的有效方法，通过过渡区域形成新相可实现Mg/Fe 有效连接。实验还发现，钢上、镁下搭接激光熔焊上层双相钢的热影响区未出现明显的软化组织，焊接熔池和钢/镁接头过渡区域未见大规模氧化物和气孔缺陷，钢侧过渡区域生成FeSn、Fe1.3Sn、Fe3Sn 等Fe-Sn 相，镁侧过渡区域生成柱状枝晶的Mg2Sn相，这些新相的存在可实现钢/镁异种金属的“双向”冶金结合。

Abstract

Laser welding of DP600 dual-phase steel to AZ31 deformation magnesium alloys is carried out in steelon- magnesium overlap configuration by using fiber laser as heat welding source with the addition of Sn foil. The best welding has been achieved based on the optimization of welding parameters, and microstructure, phase distribution, grain size, elements distribution and phase compositions of the welding joint are studied by using the horizontal microscope, scanning electron microscope (SEM) with energy dispersive spectrometer (EDS) and electron backscatter diffraction (EBSD) probe and X-ray diffraction (XRD). The results show that joining iron to magnesium can be realized due to the formation of new phases in welding transition region, and it is suitable for laser welding steel to magnesium alloys with the addition of Sn foil. In addition, the experimental results suggest that there are no softening organization in heat affected zone of the upper dual-phase steel, some defects, such as oxides, pores, etc can be avoided in the transition region of steel/magnesium. Besides, FeSn, Fe1.3Sn and Fe3Sn phases are formed in the transition zone of steel side, while columnar Mg2Sn phase is seen in the transition region of magnesium side, which is befit for jointing steel/Mg dissimilar metals by the metal lurgical reaction among the iron, Sn and magnesium.

参考文献

[1] Raymond F D. Renaissance in magnesium[J]. Advanced Materials and Processes, 1998, 154(3): 31-35.

[2] 檀财旺, 巩向涛, 李俐群, 等. 镁/钛异种金属预置Al夹层光纤激光熔钎焊接特性[J]. 中国激光, 2015, 42(1): 0103002.

Tan Caiwang, Gong Xiangtao, Li Liqun, et al.. Laser welding-brazing characteristics of dissimilar metals Mg/Ti with Al interlayers[J]. Chinese J Lasers, 2015, 42(1): 0103002.

[3] 范子杰, 桂良进, 苏瑞意. 汽车轻量化技术的研究与进展[J]. 汽车安全与节能学报, 2014, 5(1): 1-16.

Fan Zijie, Gui Liangjin, Su Ruiyi. Research and development of automotive lightweight technology[J]. J Automotive Safety and Energy, 2014, 5(1): 1-16.

[4] Wahba M, Katayama S. Laser welding of AZ31B magnesium alloy to Zn-coated steel[J]. Materials & Design, 2012, 35: 701-706.

[5] 刘黎明. 镁合金与异质材料焊接接头界面行为及研究焊接性[J]. 焊接, 2009, (7): 42-48.

Liu Liming. The interface behavior and weld ability study between magnesium alloys to heterogeneous materials[J]. Welding&Joining, 2009, (7): 42-48.

[6] Liu L, Qi X, Wu Z. Microstructural characteristics of lap joint between magnesium alloy and mild steel with and without the addition of Sn element[J]. Materials Letters, 2010, 64(1): 89-92.

[7] Liu L, Qi X. Effects of copper addition on microstructure and strength of the hybrid laser-TIG welded joints between magnesium alloy and mild steel[J]. Journal of Materials Science, 2009, 44(21): 5725-5731.

[8] 赵旭, 宋刚, 刘黎明. 镁和钢异种金属熔焊接头微观组织分析[J]. 焊接学报, 2006, 27(12): 53-56.

Zhao Xu, Song Gang, Liu Liming. Microstructure of dissimilar metal joint with magnesium alloys and steel[J]. Transactions of the China Welding Institution, 2006, 27(12): 53-56.

[9] Niu R F, Lin B H, Wang Y N, et al.. Evaporation loss of Mg element in pulsed laser welding of 5A05 aluminum alloy and distribution of micro-hardness of welding joint[J]. Transactions of the China Welding Institution, 2010, 31(3): 81-84.

[10] 虞钢, 赵树森, 张永杰, 等. 异种金属激光焊接关键问题研究[J]. 中国激光, 2009, 36(2): 261-268.

Yu Gang, Zhao Shusen, Zhang Yongjie, et al.. Research on key issues of laser welding of dissimilar metal[J]. Chinese J Lasers, 2009, 36(2): 261-268.

[11] 张屹, 谭力鹏, 张成磊. 车用高强钢激光填充热丝对接焊间隙裕度研究[J]. 中国激光, 2013, 40(7): 0703003.

Zhang Yi, Tan Lipeng, Zhang Chenglei. Research on gap margin in laser butt welding of high-strengh automobile steel with hot wire filler [J]. Chinese J Lasers, 2013, 40(7): 0703003.

[12] 丁文兵, 童彦刚, 邓德安, 等. AZ91D 变形镁合金激光焊接头的微观组织与机械性能[J]. 中国激光, 2014, 41(2): 0203003.

Ding Wenbing, Tong Yangang, Deng Dean, et al.. Microstructure and mechanical prosperities of laser welded AZ91D wrought magnesium alloy[J]. Chinese J Lasers, 2014, 41(2): 0203003.

[13] 单际国, 张婧, 郑世卿, 等. 镁合金激光焊接气孔问题的实验研究[J]. 稀有金属材料与工程, 2009, 38(S3): 234-239.

Shan Jiguo, Zhang Jing, Zheng Shiqing, et al.. Experimental study on pores in laser welding of magnesium alloys[J]. Rare Metal Materials and Engineering, 2009, 38(S3): 234-239.

[14] Xu J F, Wei B B. Liquid phase flow and microstructure formation during rapid solidification[J]. Acta Physica Sinica, 2004, 53(6): 1909- 1915.

[15] Yamamoto H M. Effect measurement of intermetallic compounds in iron-tin system: Fe5Sn3 and FeSn[J]. Journal of the Physical Society of Japan, 1966, 21(6): 1058-1062.

谭哲, 刘金水, 周惦武, 卢源志, 贾骁, 胡林西. 钢/镁异种金属搭接添加Sn 箔激光熔焊接头的微观组织分析[J]. 中国激光, 2015, 42(12): 1206003. Tan Zhe, Liu Jinshui, Zhou Dianwu, Lu Yuanzhi, Jia Xiao, Hu Linxi. Microstructure analysis on Laser Welding Joint of Steel/Magnesium Dissimilar Metal with the Addition of Sn Foil[J]. Chinese Journal of Lasers, 2015, 42(12): 1206003.

钢/镁异种金属搭接添加Sn 箔激光熔焊接头的微观组织分析

关于本站 Cookie 的使用提示

全站搜索

钢/镁异种金属搭接添加Sn 箔激光熔焊接头的微观组织分析

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索