[1] Solar frontier press release. Solar frontier achieves world record thin-film solar cell effiiciency of 23.35%[EB/OL].(2019-01-17). http://www.solar-frontier.com/eng/news/2019/0117_press.html.

[2] Katagiri H, Jimbo K, Maw W S, et al. Development of CZTS-based thin film solar cells［J］. Thin Solid Films, 2009, 517(7): 2455-2460.

[3] Chang Y, Jialiang H, Kaiwen S, et al. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment［J］. Nature Energy, 2018(3): 764-772.

[4] Repins I, Beall C, Vora N, et al. Co-evaporated Cu2ZnSnSe4 films and devices［J］. Solar Energy Materials & Solar Cells, 2012, 101: 154-159.

[5] Vanalakar S A, Agawane G L, Shin S W. et al. A review on pulsed laser deposited CZTS thin films for solar cell applications［J］. Journal of Alloys & Compounds, 2015, 619: 109-121.

[6] Fu J, Tian Q W, Zhou Z J, et al. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution［J］. Chemistry of Materials, 2016, 28: 5821-5828.

[7] Wang W, Winkler M T, Gunawan O, et al. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency［J］. Advanced Energy Materials, 2014, 4(7): 1301465.

[8] Adelifard M, Torkamani R. Spray deposited Cu2ZnSnS4 nanostructured absorber layer a promising candidate for solar cell applications［J］. Journal of Materials Science: Materials in Electronics, 2015, 26(6): 3700-3706.

[9] Chen S, Walsh A, Yang J H, et al. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells［J］. Physical Review B Condensed Matter, 2011, 83(12): 113-115.

[10] Wibowo R A, Kim W S, Lee E S, et al. Single step preparation of quaternary Cu2ZnSnSe4 thin films by RF magnetron sputtering from binary chalcogenide targets［J］. Journal of Physics and Chemistry of Solids, 2007, 68(10): 1908-1913.

[11] Zoppi G, Forbes I, Miles R W, et al. Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors［J］. Progress in Photovoltaics: Research and Applications, 2009, 17(5): 315-319.

[12] Wooseok K, Hugh W H. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent［J］. Advanced Energy Materials, 2011, 1: 732-735.

[13] Yun S L, Gershon T, Gunawan O, et al. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length［J］. Advanced Energy Materials, 2015, 5(7): 1401372.

[14] Yao L, Ao J, Jeng M J, et al. A CZTSe solar cell with 8.2% power conversion efficiency fabricated using electrodeposited Cu/Sn/Zn precursor and a three-step selenization process at low Se pressure［J］. Solar Energy Materials and Solar Cells, 2017, 159: 318-324.

[15] Taskesen T， Neerken J， Schoneberg J， et al. Device characteristics of an 11.4% CZTSe solar cell fabricated from sputtered precursors［J］. Advanced Energy Materials, 2018, 8(16): 1703295.1-1703295.6.

[16] Zhang Z J, Gao Q, Guo J J, et al. Over 10% efficient pure CZTSe solar cell fabricated by electrodeposition with Ge doping［J］. Solar RRL,2020, 4(5): 2000059.

[17] Li J J, Mai Y H, Chen S Y, et al. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment［C］.第七届新型太阳能电池材料科学与技术学术研讨会论文集.中国可再生能源学会光化学专业委员会(Photochemistry Committee of Chinese Renewable Energy Society):中国科学院物理研究所清洁能源实验室,2020:297.

[18] Li J, Kim S Y, Nam D, et al. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells［J］. Solar Energy Materials and Solar Cells, 2017, 159: 447-455.

[19] Stefan G H, Matthias D, Melanie W, et al. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit［J］. Advanced Energy Materials, 2015, 5(18): 1500712.

[20] Kim S Y, Son D H, Kim Y I, et al. Void and secondary phase formation mechanisms of CZTSSe using Sn/Cu/Zn/Mo stacked elemental precursors［J］. Nano Energy, 2019, 59: 399-411.

[21] Djemour R, Mousel M, Redinger A, et al. Detecting ZnSe secondary phase in Cu2ZnSnSe4 by room temperature photoluminescence［J］. Applied Physics Letters, 2013, 102(22): 222108.

[22] Just J, Sutter-Fella C M, Lützenkirchen-Hecht, et al. Secondary phases and their influence on the composition of the kesterite phase in CZTS and CZTSe thin films［J］. Phys Chem Chem Phys,2016:10.1039.C6CP00178E.

[23] Hwang D K, Ko B S, Jeon D H, et al. Single-step sulfo-selenization method for achieving low open circuit voltage deficit with band gap front-graded Cu2ZnSn(S,Se)4 thin films［J］. Solar Energy Materials and Solar Cells, 2017, 161: 162-169.

[24] Li X, Zhuang D, Zhang N, et al. Achieving 11.95% efficient Cu2ZnSnSe4 solar cells fabricated by sputtering a Cu-Zn-Sn-Se quaternary compound target with a selenization process［J］. Journal of Materials Chemistry A, 2019, 7(16): 9948-9957.

[25] Wei Y, Zhuang D, Zhao M, et al. An investigation on phase transition for as-sputtered Cu2ZnSnSe4 absorbers during selenization［J］. Solar Energy, 2018, 164(APR.): 58-64.

[26] Olgar M A, Atasoy Y, Ba瘙
塂ol B M, et al. Influence of copper composition and reaction temperature on the properties of CZTSe thin films［J］. Journal of Alloys & Compounds, 2016, 682: 610-617.