激光技术, 2006, 30 (1): 0016, 网络出版: 2010-06-03   

激光熔覆金属陶瓷涂层开裂的机理及防止措施

Mechanism of the deformation and preventive measures of the cracks in metal ceramics cladding layer
作者单位
1 山东大学 材料科学与工程学院,济南 250061
2 山东建筑工程学院,济南 250014
摘要
在总结国内外激光熔覆金属陶瓷涂层开裂研究现状的基础上,分析了裂纹的形成机理,从激光处理工艺和参数选择、熔覆层成分及基体形状的设计等方面阐述了裂纹行为的影响因素及相应的防止措施,最后展望了其发展前景。
Abstract
After summarising the current situation of domestic and foreign researches of cracks of metal cermics cladding layer,the mechanism of the deformation of the cracks is analyzed. The four influencial factors and corresponding preventive measures of the cracking behavior including the technical process,the parameters of laser cladding,the desighing of coating components and the form of matrix are discussed. The development prospect of the technique is also pointed out.
参考文献

[1] MCPHERSON R A. Review of microstructure and properties of plasma sprayed ceramic coatings [J].Surface and Coatings Technology,1999,39(40):173~182.

[2] LIU Y,MAZUMDER J,SHIBATA K. Microstnrctural study of the interface in laser-clad Ni-AI bronze on AI alloy AA33 and its relation to cracking [J].Metallurgical and Materials Transactions,1995,A26(8):1519~1533.

[3] CARVALHO P A. Laser alloying of Zinc with aluminum: solidification structures [J].Surface & Coating Technology,1997,91(12):158~166.

[4] CHEN J,YANG H O,LI Y M et al. The research on two kinds of cracking behavior and mechanism of cladding in rapid laser forming process [J].Applied Laser,2002,22(3):300~304(in Chinese).

[5] WANG X L,QI H B. Study on crack control of layer during laser cladding sealing surface of petrochemical valves [J].Laser Technology,2002,26(5):359~363(in Chinese).

[6] SINGH J,MAZUNDER J. Microstrcture and wear properties of laser clad Fe-Mn-C alloys [J].Metallurgical Transactions,1987,18(5):313~318.

[7] LUAN J F. Effect of processing factors on crack ration of laser clad layer [J].Material Science and Engineering,2002,20(3):349~353(in Chinese).

[8] XIE Ch Sh,WANG A H,HUANG K J. Formation of cracks on laser cladded cast iron surface [J].Iron and Steel,1994,29(8):48~51(in Chinese).

[9] CHEN Ch Zh,WANG D G,LEI T Q. Strcture characteristic of laser clad ceramic and its composite coatings [J].Laser Technology,2001,25(6):401~405(in Chinese).

[10] ZHOU X B,De HOSSON J T M. A reaction coating on aluminium alloys by laser processing [J].Scripta Metallurgica et Materialia,1993,28(10):219~224.

[11] CHEN Ch Zh,LEI T Q,BAO Q H et al. Problems and the improving measures in laser remelting of plasma sprayed ceramic coatings [J].Materials Science and Technology,2002,10(4):431~435(in Chinese).

[12] McDONALD G,HPENDRICKS R C. Effect of thermal cycling on ZrO2-Y2O3 thermal barrier coatings [J].Thin Solid Films,1980,73(10):491~496.

[13] PILOZ M. Residual stress induced by laser coatings: phenomenological analysis and predictions [J].Material Science,1992,27(2):120~124.

[14] ZHU B L,HU M L,CHENG L et al. Research stains of cracking in laser cladding layer [J].Heat Treatment of Metals,2000,25(7):1~4(in Chinese).

[15] PAI B C. Role of magnesium in casdt aluminum alloy matrix composites [J].Material Science,1995,30(6):1903~1911.

[16] WU X W,ZENG X Y,ZHU P D et al. Cracking tendency of laser cladding Ni-based WC composite coatings [J].Chinese Journal of Lasers,1997,24(6):570~576(in Chinese).

[17] CHEN Ch Zh,WANG H Zh,CAO H H et al. Properties of brittleness and abrasion of laser cladded Al2O3-NiCrAl composite ceramic coatings [J].Chinese Journal of Lasers,1999,25(9): 841 ~ 846(in Chinese).

[18] CHEN Ch Zh,CAO H H,LEI T Q et al. Structure and properties of laser cladded Al2O3-CoCrAlY composite ceramic coatings on W18Cr4V steel [J].Journal of the Chinese Ceramic Society,1999,27(4):445~451(in Chinese).

[19] LIU Q B,ZHU W D,CHEN J. A methodof improving laser cladding Fe-based alloy coating on high temperature alloy [J].Journal of Guizhou University of Technology,2000,29(5): 56~59(in Chinese).

[20] GREZEV A N,SAFONOV A N. Cracking and microstructure of laser depositedchromium-boron-nickle alloy [J].Welding International,1987,22(1):50.

[21] SONG W L,ZHU P D,GAN C H et al. Effects of crystallizing orientation on crack direction and cracking sensitivity in laser cladded layers [J].Chinese Journal of Lasers,1995,22(4):309~312(in Chinese).

[22] ZHANG Y M. Finite element analysis of a thermally loaded interface crack in a ceramic coating [J].Engineering Fracture Mechanics,1998,59(2):203~214.

[23] WANG Zh,LI C,MENG X P et al. Microstructure and propertions oflnsitu TiC pariculate reinforeed AI-Si alloy composite [J].Acta Metallurgica Sinica,1994,30(1):39~44.

[24] ZHOU X B,De HOSSON J T M. A reaction coating on alwminium alloy by laser processing [J].Scripta Metallurgica,1993,28(9):219~231.

[25] ZHANG S,ZHANG Ch H,WANG M C et al. The wear property of Ti-based composite produced by laser cladding [J].Journal of Metallurgica,2001,37(3):315~320(in Chinese).

[26] SONG W L,ZHU P D,ZHANG J ed al. The effects of expansion coefficient of laser cladding layer on cracking sensitivity [J].Journal of Huazhong University of Science and Technology,1999,27(1):42~44(in Chinese).

赵亚凡, 陈传忠. 激光熔覆金属陶瓷涂层开裂的机理及防止措施[J]. 激光技术, 2006, 30(1): 0016. ZHAO Ya-fan, CHEN Chuan-zhong. Mechanism of the deformation and preventive measures of the cracks in metal ceramics cladding layer[J]. Laser Technology, 2006, 30(1): 0016.

本文已被 11 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!