[1] 卡默. 铝手册［M］. 卢惠民 译. 北京: 化学工业出版社, 2008. 32～40

    C. Kammer. Aluminum Handbook［M］. Lu Huimin Transl. Beijing: Chemical Industry Press, 2008. 32～40

[2] 刘静安, 谢水生. 铝合金材料应用与技术开发［M］. 北京: 冶金工业出版社, 2004. 130～134

    Liu Jing′an, Xie Shuisheng. Aluminum Alloy Material Application and Development［M］. Beijing: Metallurgical Industry Press, 2004. 130～134

[3] A. F. H. Kaplan. An analytical model of metal cutting with a laser beam［J］. J. Appl. Phys., 1996, 79(5): 2198～2208

[4] P. Marek, C. Hana, S. Martin et al.. Modeling of laser cutting and drilling［C］. SPIE, 2002, 4888: 146～151

[5] C. Mas, R. Fabbro. Steady-state laser cutting modeling［J］. J. Laser Appl., 2003, 15(3): 145～152

[6] Lee Mein Wee, Lin Li. An analytical model for striation formation in laser cutting［J］. Appl. Surf. Sci., 2005, 247(1-4): 277～284

[7] E. D. Cabanillas, M. F. Creus, R. C. Mercader. Microscopic spheroidal particles obtained by laser cutting［J］. J. Mater. Sci., 2005, 40(2): 519～522

[8] L. Lobo, K. William, J. R. Tyrer. The effect of laser processing parameters on the particulate generated during the cutting of thin mild steel sheet［J］. J. Mech. Engng. Sci., 2002, 216(3): 301～313

[9] B. S. Yilbas, B. J. Abdul Aleem. Dross formation during laser cutting process［J］. J Phys. D: Appl. Phys., 2006, 39(7): 1451～1461

[10] 黄开金, 谢长生, 邵可然. 激光切割1Cr18Ni9Ti不锈钢管材挂渣和飞渣的研究［J］. 应用激光, 2001, 21(3): 159～163

    Huang Kaijin, Xie Changsheng, Shao Keran. Investigation on the hanging dross and the flight slag of 1Cr18Ni9Ti stainless steel pipe laser cutting［J］. Applied Laser, 2001, 21(3): 159～163

[11] 王续跃, 孟庆轩, 康仁科 等. 气熔比法铝合金薄板激光切割试验研究［J］. 中国激光, 2010, 37(10): 2648～2652

    Wang Xuyue, Meng Qingxuan, Kang Renke et al.. Experiments of laser cutting of aluminum alloy sheet based on vaporization-melt ratio controlled method［J］. Chinese J. Lasers, 2010, 37(10): 2648～2652

[12] 孟庆轩, 王续跃, 徐文骥 等. 薄板激光切割气熔比数学建模及试验验证［J］. 机械工程学报, 2011, 47(17): 172～178

    Meng Qingxuan, Wang Xuyue, Xu Wenji et al.. Vaporization-melt ratio mathematical model and experiments of laser cutting sheet metal［J］. Chinese Journal of Mechanical Engineering, 2011, 47(17): 172～178

[13] F. Quintero, F. Varas, J. Pou et al.. Theoritical analysis of material removal mechanism in pulsed laser fusion cutting of ceramics［J］. J. Phys. D: Appl. Phys., 2005, 38(4): 655～666

[14] 陈继民, 肖荣诗, 左铁钏 等. 激光切割工艺参数的智能选择系统［J］. 中国激光, 2004, 31(6): 757～760

    Chen Jimin, Xiao Rongshi, Zuo Tiechuan et al.. Intelligent system for selecting laser cutting parameters［J］. Chinese J. Lasers, 2004, 31(6): 575～578

[15] 阎启, 刘丰. 工艺参数对激光切割工艺质量的影响［J］. 应用激光, 2006, 26(3): 151～153

    Yan Qi, Liu Feng. Influence of technology parameters on the laser cutting quality［J］. Applied Laser, 2006, 26(3): 151～153