基于去除熔化物形态分析的铝合金薄板激光切割试验研究
[1] 卡默. 铝手册[M]. 卢惠民 译. 北京: 化学工业出版社, 2008. 32~40
C. Kammer. Aluminum Handbook[M]. Lu Huimin Transl. Beijing: Chemical Industry Press, 2008. 32~40
[2] 刘静安, 谢水生. 铝合金材料应用与技术开发[M]. 北京: 冶金工业出版社, 2004. 130~134
Liu Jing′an, Xie Shuisheng. Aluminum Alloy Material Application and Development[M]. Beijing: Metallurgical Industry Press, 2004. 130~134
[3] A. F. H. Kaplan. An analytical model of metal cutting with a laser beam[J]. J. Appl. Phys., 1996, 79(5): 2198~2208
[4] P. Marek, C. Hana, S. Martin et al.. Modeling of laser cutting and drilling[C]. SPIE, 2002, 4888: 146~151
[5] C. Mas, R. Fabbro. Steady-state laser cutting modeling[J]. J. Laser Appl., 2003, 15(3): 145~152
[6] Lee Mein Wee, Lin Li. An analytical model for striation formation in laser cutting[J]. Appl. Surf. Sci., 2005, 247(1-4): 277~284
[7] E. D. Cabanillas, M. F. Creus, R. C. Mercader. Microscopic spheroidal particles obtained by laser cutting[J]. J. Mater. Sci., 2005, 40(2): 519~522
[8] L. Lobo, K. William, J. R. Tyrer. The effect of laser processing parameters on the particulate generated during the cutting of thin mild steel sheet[J]. J. Mech. Engng. Sci., 2002, 216(3): 301~313
[9] B. S. Yilbas, B. J. Abdul Aleem. Dross formation during laser cutting process[J]. J Phys. D: Appl. Phys., 2006, 39(7): 1451~1461
[10] 黄开金, 谢长生, 邵可然. 激光切割1Cr18Ni9Ti不锈钢管材挂渣和飞渣的研究[J]. 应用激光, 2001, 21(3): 159~163
Huang Kaijin, Xie Changsheng, Shao Keran. Investigation on the hanging dross and the flight slag of 1Cr18Ni9Ti stainless steel pipe laser cutting[J]. Applied Laser, 2001, 21(3): 159~163
[11] 王续跃, 孟庆轩, 康仁科 等. 气熔比法铝合金薄板激光切割试验研究[J]. 中国激光, 2010, 37(10): 2648~2652
[12] 孟庆轩, 王续跃, 徐文骥 等. 薄板激光切割气熔比数学建模及试验验证[J]. 机械工程学报, 2011, 47(17): 172~178
Meng Qingxuan, Wang Xuyue, Xu Wenji et al.. Vaporization-melt ratio mathematical model and experiments of laser cutting sheet metal[J]. Chinese Journal of Mechanical Engineering, 2011, 47(17): 172~178
[13] F. Quintero, F. Varas, J. Pou et al.. Theoritical analysis of material removal mechanism in pulsed laser fusion cutting of ceramics[J]. J. Phys. D: Appl. Phys., 2005, 38(4): 655~666
[14] 陈继民, 肖荣诗, 左铁钏 等. 激光切割工艺参数的智能选择系统[J]. 中国激光, 2004, 31(6): 757~760
Chen Jimin, Xiao Rongshi, Zuo Tiechuan et al.. Intelligent system for selecting laser cutting parameters[J]. Chinese J. Lasers, 2004, 31(6): 575~578
[15] 阎启, 刘丰. 工艺参数对激光切割工艺质量的影响[J]. 应用激光, 2006, 26(3): 151~153
王彦飞, 王续跃, 康仁科, 徐文骥, 郭东明. 基于去除熔化物形态分析的铝合金薄板激光切割试验研究[J]. 中国激光, 2012, 39(8): 0803007. Wang Yanfei, Wang Xuyue, Kang Renke, Xu Wenji, Guo Dongming. Experimental Study on Laser Cutting Based on Removal Forms for Aluminum Alloy Sheet[J]. Chinese Journal of Lasers, 2012, 39(8): 0803007.