[1] 张林，罗炫，杜凯. ICF靶低密度聚合物多孔材料研究进展［J］. 材料导报, 2002, 16(6): 48-51.(Zhang Lin, Luo Xuan, Du Kai. Progress in research on low-density porous polymer for ICF targets. Materials Review, 2002, 16(6): 48-51)

[2] 江少恩,孙可煦,郑志坚,等.神光Ⅱ装置X射线辐射在低密度CH泡沫中的超声速传播实验研究［J］.物理学报，2004，53(10)：3413-3418.(Jiang Shaoen, Sun Kexi, Zheng Zhijian, et al. Experimental investigation of supersonic X-ray transport in radioactively heated CH foam cylinders on ShenguangⅡfacilities. Acta Physica Sinica, 2004，53(10)：3413-3418)

[3] Nagai K, Azechi H, Ito F, et al. Foam materials for cryogenic targets of fast ignition realization experiment［J］. Nuclear Fusion，2005, 45(11): 1277-1283.

[4] 罗炫，张林，杜凯，等. 超低密度聚乙烯泡沫的热致相分离制备［J］.原子能科学技术，2008，42(7): 598-601.(Luo Xuan, Zhang Lin, Du Kai, et al. Fabrication of ultra-low density polyethylene foams from thermally-induced phase separation. Atomic Energy Science and Technology, 2008，42(7): 598-601)

[5] Bailey J E，Chandler G A，Slutz S A，et al. Hot dense capsule-implosion cores produced by Z-pinch dynamic hohlraum radiation［J］. Physical Review Letters, 2004, 92:085002.

[6] Chroned D G, Back C A, Holt R R. Target fabrication for Sandia’s Z-pinch accelerator［R］. GA-25820, 2007: 1-5.

[7] 宁成, 杨震华, 丁宁. Z箍缩内爆过程中的能量转换机制研究［J］. 物理学报, 2003, 55(2): 415-420.(Ning Cheng, Yang Zhenhua, Ding Ning. Studies on the mechanism of energy transformation in implosion processes of the Z-pinches. Acta Physica Sinica, 2003, 55(2): 415-420)

[8] 方瑜，罗炫，张林，等.低密度三羟甲基丙烷三丙烯酸酯泡沫的研制［J］.强激光与粒子束,2008, 20(7)：1093-1096.(Fang Yu, Luo Xuan, Zhang Lin, et al. Preparation of low density trimethylol propane triacrylate foams. High Power Laser and Particle Beams, 2008, 20(7):1093-1096)

[9] 魏芸,邱龙会,唐永建,等. Z-pinch 靶的结构及材料特点［J］. 强激光与粒子束, 2001, 13(5):568-572.(Wei Yun, Qiu Longhui, Tang Yongjian, et al. Characteristics of Z-pinch targets and related materials. High Power Laser and Particle Beams, 2001, 13(5):568-572)

[10] Elliott N E, Mitchell M A. Characterization of density and metal content in low density foam targets for inertial confinement fusion［J］. Nuclear Instruments and Methods in Physics Research A, 1995, 362(7):112-113.

[11] 张林，王朝阳，罗炫，等.热诱导倒相法超低密度PMP泡沫的研制［R］.中国核科技报告, 2003: 130-143.(Zhang Lin, Wang Chaoyang, Luo Xuan, et al. Development on the fabrication of ultra-low density ploy (4-methyl-1-pentene)(PMP) foams by thermal induced phase-inversion technique. China Nuclear Science and Technology Report, 2003: 130-143)

[12] Du Kai, Zhang Lin, Luo Xuan, et al. Structure and properties of PMP foams doped with Cu nanopowders［J］. Journal of Applied Polymer Science, 2006,102(2): 5627-5632.

[13] 杜凯，张林，罗炫. 铁掺杂PMP 泡沫制备工艺研究［J］. 强激光与粒子束, 2004,16(6):737-740.(Du Kai, Zhang Lin, Luo Xuan. Preparation of Fe-doping PMP foam. High Power Laser and Particle Beams, 2004,16(6):737-740)

[14] 尹强,张林, 罗炫，等. 溴掺杂低密度PMP 泡沫的制备技术研究［J］.强激光与粒子束, 2005, 17(5):700-702.(Yin Qiang, Zhang Lin, Luo Xuan, et al. Synthesis of low-density bromine doped PMP foam. High Power Laser and Particle Beams, 2005, 17(5):700-702)

[15] Ronald F S, John D B. Ultra-low density microcellular polymer foam and method［P］. 1997, US Patent: A8417364.

[16] 谢军,黄燕华,吴卫东,等. 单点金刚石切削技术在ICF 靶制备中的应用［J］. 原子能科学技术，2005, 39(3):274-277.(Xie Jun, Huang Yanhua, Wu Weidong, et al. Application of single point diamond turning technology in the field of ICF target fabrication. Atomic Energy Science and Technology, 2005, 39(3):274-277)