发光学报, 2018, 39 (9): 1225, 网络出版: 2018-09-08  

SrAl2O4∶Eu,Ho/树脂应力发光薄膜在焊缝缺陷检测中的应用

Application of SrAl2O4∶Eu,Ho/Resin Mechanoluminescence Thin Film in Visualization Detection of Weld Seam Defects
作者单位
1 厦门理工学院 材料科学与工程学院, 福建省功能材料及应用重点实验室, 福建 厦门 361024
2 中国科学院 城市环境研究所, 福建 厦门 361021
摘要
采用高温固相法合成SrAl2O4∶Eu,Ho应力发光材料。XRD结果表明, 所合成的样品较纯, 掺杂离子并未改变基质材料的基体结构。将 SrAl2O4∶Eu,Ho(SAOEH)应力发光粉末与树脂混合制备复合应力发光薄膜。光谱结果表明, 薄膜的发光随着厚度的增加而增强; 薄膜的SEM结果表明, SAOEH粉体颗粒均匀分散在树脂中。将应力发光薄膜应用于钢板焊缝处背面, 应力测试结果表明薄膜应力发光先增强后减弱。当薄膜厚度为0.9 mm时, 应力发光最强, 且在焊缝处可得到较高的响应值。此外, 在循环测试的过程中, 应力发光薄膜可对焊板断裂实现实时响应, 结合CCD相机可实现钢板焊缝检测的可视化, 并对缺陷定位。
Abstract
Mechanoluminescence(ML) materials SrAl2O4∶Eu,Ho(SAOEH) were prepared via solid state reaction. The XRD results show that the as-prepared sample is mostly monoclinic SrAl2O4 phase. The SAOEH powder was mixed with high elastic resin to prepare ML thin film. The photoluminescent intensity of the ML film increases following the increase of film thickness. The SEM results reveal that SAOEH ML particles disperse uniformly in the resin. In order to detect the weld seam defects, the SAOEH ML film was pasted in the backside of welding steel plate. It can be found that the ML intensity in the weld region is stronger than that in any other region. In addition, the ML intensity is enhanced following the increase of film thickness and reaches the strongest when the film thickness is 0.9 mm. Furthermore, the SAOEH film can be utilized to realize a real-time response to the fracture. Combining with CCD camera, the visual detection of steel weld and location of the defect region during the cyclic test can be realized.
参考文献

[1] 李建忠, 刘国奇, 陈振华, 等. 基于小波包分解的不锈钢焊缝超声TOFD检测信号及缺陷信号提取 [J]. 无损检测, 2015, 37(1):38-41.

    LI J Z, LIU G Q, CHEN Z H, et al.. Defect signal extraction on ultrasonic TOFD testing signal of stainless steel weld based on wavelet packet decomposition [J]. Nondestruct. Testing, 2015, 37(1):38-41. (in Chinese)

[2] 李晓丽, 金万平, 张存林, 等. 红外热波无损检测技术应用与进展 [J]. 无损检测, 2015, 37(6):19-23.

    LI X L, JIN W P, ZHANG C L, et al.. The application and progress of infrared thermal wave nondestructive detection technology [J]. Nondestruct. Testing, 2015, 37(6):19-23. (in Chinese)

[3] 刘彦斌, 薄玉发, 刁明, 等. 浅谈无损探伤在铸件检测中的应用 [J]. 铸造工程, 2015(5):38-41.

    LIU Y B, BO Y F, DIAO M, et al.. Discussion on the application of nondestructive testing in casting inspection [J]. Found. Eng., 2015(5):38-41. (in Chinese)

[4] 张文妍. 机车车辆关键部位焊缝的涡流探伤技术研究 [D]. 大连: 大连交通大学, 2013.

    ZHANG W Y. Research on The Technology of Eddy-Current Detection for Railway Vehicle Welding Defects [D]. Dalian: Dalian Jiaotong University, 2013. (in Chinese)

[5] TU D, PENG D F, XU C N, et al.. Mechanoluminescence properties of red-emitting piezoelectric semiconductor MZnOS∶Mn2+ (M=Ca, Ba) with layered structure [J]. J. Ceram. Soc. Jpn., 2016, 124(6):702705.

[6] 付晓燕, 房立均, 付海霞, 等. 紫外应力发光材料SrMgSi2O6∶Ce的制备与光谱性质研究 [J]. 发光学报, 2013, 34(8):1006-1010.

    FU X Y, FANG L J, FU H X, et al..Ultraviolet mechanoluminescence from SrMgSi2O6∶Ce [J]. Chin. J. Lumin., 2013, 34(8):1006-1010. (in Chinese)

[7] FUJIO Y, XU C N, TERASAWA Y, et al.. Sheet sensor using SrAl2O4∶Eu mechanoluminescent material for visualizing inner crack of high-pressure hydrogen vessel [J]. Int. J. Hydrogen Energy, 2016, 41(2):1333-1340.

[8] ZHANG J C, ZHAO L Z, LONG Y Z, et al.. Color manipulation of intense multiluminescence from CaZnOS∶Mn2+ by Mn2+ concentration effect [J]. Chem. Mater., 2015, 27(21):7481-7489.

[9] LEELACHAO S, MURAISHI S, SANNOMIYA T, et al.. Correlation of triboluminescence and contact stresses in ZnS∶Mn/polymeric matrix composite [J]. J. Lumin., 2016, 170:24-29.

[10] 付晓燕, 房立钧, 郑升辉, 等. 超声引起的SrAl2O4∶Eu,Dy薄膜的应力发光 [J]. 发光学报, 2016, 37(9):1066-1070.

    FU X Y, FANG L J, ZHENG S H, et al.. Mechanoluminescence of SrAl2O4∶Eu,Dy film induced by ultrasound [J]. Chin. J. Lumin., 2016, 37(9):1066-1070. (in Chinese)

[11] ZHANG H W, XU C N, TERASAKI N, et al.. Detection of stress distribution using Ca2MgSi2O7∶Eu,Dy microparticles [J]. Phys.E: Low-Dimens. Syst. Nanostruct., 2010, 42(10):2872-2875.

[12] FU X Y, ZHANG H W, FANG L J, et al.. Preparation and mechanoluminescent properties of SrAl2O4∶Eu film grown on silicon substrate using double buffer layers[J]. Thin Solid Films, 2013, 540:41-45.

[13] 傅胤荣, 胡义华, 金亚洪. 应力发光材料BaZrSi3O9的制备与发光特性研究 [J]. 广东工业大学学报, 2015, 32(4):17-20.

    FUY R, HU Y H, JIN Y H. Preparation and mechanoluminescent properties of BaZrSi3O9 [J]. J. Guangdong Univ. Technol., 2015, 32(4):17-20. (in Chinese)

[14] WANG X, XU C N, YAMADA H, et al.. Electro-mechano-optical conversions in Pr3+ doped BaTiO3-CaTiO3 ceramics [J]. Adv. Mater., 2005, 17(10):1254-1258.

[15] ZHAO H, WANG X, LI J, et al.. Strong mechanoluminescence of Zn2(Ge0.9Si0.1)O4∶Mn with weak persistent luminescence [J]. Appl. Phys. Express, 2016, 9(1):012104.

[16] ZHANG H, YAMADA H, TERASAKI N, et al.. Ultraviolet mechanoluminescence from SrAl2O4∶Ce and SrAl2O4∶Ce,Ho [J]. Appl. Phys. Lett., 2007, 91(8):081905-1-3.

[17] CHEN Y, WANG J, LIU C, et al.. UV-Vis-NIR luminescence properties and energy transfer mechanism of LiSrPO4∶Eu2+, Pr3+ suitable for solar spectral convertor [J]. Opt. Express, 2013, 21(3):3161-3169.

[18] TIGGA S, BRAHME N, BISEND P. Effect of gamma irradiation on thermoluminescence and fractomechanoluminescence properties of SrMgAl10O17∶Eu2+ phosphor [J]. Opt. Mater., 2016, 53:109-115.

郑升辉, 刘亚楠, 李月婵, 付晓燕, 张洪武. SrAl2O4∶Eu,Ho/树脂应力发光薄膜在焊缝缺陷检测中的应用[J]. 发光学报, 2018, 39(9): 1225. ZHENG Sheng-hui, LIU Ya-nan, LI Yue-chan, FU Xiao-yan, ZHANG Hong-wu. Application of SrAl2O4∶Eu,Ho/Resin Mechanoluminescence Thin Film in Visualization Detection of Weld Seam Defects[J]. Chinese Journal of Luminescence, 2018, 39(9): 1225.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!