基于最小能量准则的参数估计圆周SAR三维成像方法
[1] 洪文. 圆迹SAR成像技术研究进展[J]. 雷达学报, 2012, 1(2): 124-135.
Hong Wen. Progress in circular SAR imaging technique[J].Journal of Radars, 2012, 1(2): 124-135. (in Chinese)
[4] Wang Qi, Xing Mengdao, Lu Guangyue, et al. SRMF-CLEAN imaging algorithm for space debris[J]. IEEE Transcation on Antennas & Propagation, 2007, 55(12): 3524-3533.
[5] Soumekh M. Synthetic Aperture Radar Signal Processing with MATLAB Algorithms[M]. New York: Wiley, 1999.
[6] Zhao Y, Lin Y, Hong W, et al. Adaptive imaging of anisotropic target based on circular-SAR[J]. Electronics Letters, 2016, 52(16): 1406-1408.
[8] Zhang B, Pi Y, Min R. A CGRT-CLEAN Method for Circular SAR Three Dimensional Imaging[M]//Signal Processing, and Systems. New York: Springer, 2012: 41-52.
[9] 王保平, 郭俊杰, 孙超, 等. 基于SRMF和序列CLEAN的空间碎片ISAR成像算法[J]. 红外与激光工程, 2013, 42(12): 3410-3416.
Wang Baoping, Guo Junjie, Sun Chao, et al. ISAR imaging algorithm based on SRMF and sequence CLEAN[J]. Infrared and Laser Engineering, 2013, 42(12): 3410-3416. (in Chinese)
[11] Zhao Ning, Lu Jiaguo, Ge Jialong, et al. Research of P band circular polarization SAR[C]//2016 CIE International Conference on Radar (RADAR). IEEE, 2017.
[12] Dupuis X, Martineau P. Very high resolution circular SAR imaging at X band[C]//IEEE International Geoscience & Remote Sensing Symposium. IEEE, 2014: 930-933.
[13] Jia G, Buchroithner M F, Chang W, et al. Fourier-based 2-D imaging algorithm for circular synthetic aperture radar: analysis and application[J]. IEEE Journal of Selected Topics in Applied Earth Observations & Remote Sensing, 2016, 9(1): 475-489.
[15] Chen L, An D, Huang X. A back projection-based imaging for circular synthetic aperture radar[J]. IEEE Journal of Selected Topics in Applied Earth Observations & Remote Sensing, 2017, 10(8): 3547-3555.
王保平, 马健钧, 张研, 方阳. 基于最小能量准则的参数估计圆周SAR三维成像方法[J]. 红外与激光工程, 2019, 48(7): 0726001. Wang Baoping, Ma Jianjun, Zhang Yan, Fang Yang. Parameter estimation of circular SAR 3-D imaging method based on the minimum energy criterion[J]. Infrared and Laser Engineering, 2019, 48(7): 0726001.