透镜阵列模压加压过程型腔充型率的有限元仿真
[1] Fischbacha Kyle D, Georgiadis Kyriakos, Wang Fei, et al.. Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding [J]. Surf Coat Technol, 2010, 205(2): 312-319.
[2] Anurag Jain.Experimental Study and Numerical Analysis of Compression Molding Process for Manufacturing Precision Aspherical Glass Lenses [D]. Columbus: The Ohio State University, 2006. 2-11.
[3] Tsaia Yuchung, Hung Chinghua, Hung Jungchung. Glass material model for the forming stage of the glass molding process [J]. J Mater Process Technol, 2008, 201(1): 751-754.
[4] Sellier M, Breitbach C, Loch H, et al.. An iterative algorithm for optimal mould design for the manufacture by compression moulding of high-precision lenses [J]. J Engineering Manufacture, 2007, 221(1): 25-33.
[5] 尹韶辉,王玉方,朱科军, 等.微小非球面玻璃透镜超精密模压成型数值模拟[J]. 光子学报, 2010, 39(11): 2021-2024.
Yin Shaohui, Wang Yufang, Zhu Kejun, et al.. Numerical simulation of ultraprecision glass molding for micro aspherical glass lens [J]. Acta Photonica Sinica, 2010, 39(11): 2021-2024.
[6] 尹韶辉, 靳 松, 朱科军, 等. 非球面玻璃透镜模压成型的有限元应力分析[J]. 光电工程, 2010, 37(10): 111-115.
[7] Zhon Tianfeng, Yah Jiwang, Masudab Jun, et al.. Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process [J]. J Mater Process Technol, 2009, 209(9): 4484-4489.
[8] Jain Anurag, Yi Allen Y. Numerical simulation of compression molding of aspherical glass lens [J]. AIP Conference Proceedings, 2004, 712: 239-244.
[9] 倪佳佳, 范玉峰, 陈文华. 非球面光学玻璃透镜的模压仿真研究 [J]. 激光与光电子学进展, 2013, 50(3): 032201.
[10] 张义同. 热粘弹性理论[M]. 天津: 天津大学出版社, 2002. 1-20.
Zhang Yitong. Theory of Thermo-Viscoelasticity [M]. Tianjin: Tianjin University Press, 2002. 1-20.
[11] 耿 铁, 李德群, 周华民, 等. 玻璃成形数值模拟技术研究概述[J]. 机械设计与制造, 2006, 4(4): 170-171.
Gen Tie, Li Dequn, Zhou Huamin, et al..On the research of numerical simulation technology of glass forming processes [J]. Machinery Design & Manufacture, 2006, 4(4): 170-171.
[12] Zhou Tianfeng, Yan Jiwang, Masuda Jun, et al.. Investigation on shape transferability in ultraprecision glass molding press for microgrooves [J]. Precision Engineering, 2011, 35(2): 214-220.
[13] 张清明, 剑 南. 模压光学元件可以高精度大量生产 [J]. 激光与光电子学进展, 1992, 29(6): 17-19.
卢景红, 徐敏, 张浩. 透镜阵列模压加压过程型腔充型率的有限元仿真[J]. 激光与光电子学进展, 2014, 51(2): 022303. Lu Jinghong, Xu Min, Zhang Hao. Study on Cavity Filling Ratio of Lens Array in the Process of Compression Molding Pressing Using Finite Element Simulation[J]. Laser & Optoelectronics Progress, 2014, 51(2): 022303.