镍基合金的宽带激光熔覆
[1] R. Villar. Lasr Cladding. J. Laser Appl., 1999, 11(2):64~78
[2] Li Qiang, Lei Tingquan, Meng Qingchang et al.. Transmission electron microscopy for microstructural characterization of the laser clad Ni-Cr-B-Si-C alloy. Chinese J. Lasers (中国激光), 1999, 26(4):372~378 (in Chinese)
[3] Xu Chun, Lou Yuanying, Zou Zhirong. Laser cladding of NiCrBSi alloy on the 45 steel. Chinese J. Lasers (中国激光), 1997, 24(1):78~82 (in Chinese)
[4] Yang Xichen. Study of laser beam pattern for a wide-band laser heat treatment. Chinese J. Lasers (中国激光), 1990, 17(4):229~235 (in Chinese)
[5] Wang Yunshan. Analysis for laser beam pattern of wide-band scanning mirror. Optoelectronics·Laser (光电子·激光), 1997, 8(4):282~283
[8] Y. T. Pei, J. H. Ouyang, T. C. Lei. Microstructure of bonding zones in laser-clas Ni-ally-based composite coatings reinforced with various ceramic powders. Metall. Trans. A, 1996, 27A:391~400
雒江涛, 郭洪, 梁二军, 杜利平, 晁明举, 马润香. 镍基合金的宽带激光熔覆[J]. 中国激光, 2001, 28(10): 957. 雒江涛, 郭洪, 梁二军, 杜利平, 晁明举, 马润香. Wide-band Laser Cladding of Ni-based Alloy[J]. Chinese Journal of Lasers, 2001, 28(10): 957.