小视场环境下的摄像机标定

郭涛; 达飞鹏; 方旭

doi:doi:10.3788/cjl201239.0808001

中国激光, 2012, 39 (8): 0808001, 网络出版: 2012-07-09

小视场环境下的摄像机标定

Camera Calibration under Small Field of View

论文大纲

郭涛 ^*达飞鹏方旭

作者单位

东南大学自动化研究所，江苏南京 210096

机器视觉摄像机标定小视场二次曲线直线 machine vision camera calibration small field of view conic line

摘要

摄像机标定旨在建立三维世界坐标与二维图像坐标之间的映射关系。传统标定板为数十个整齐排列的标准圆或网格，通过提取圆心坐标或网格角点坐标进行标定。在微小物体测量系统中，摄像机视场较小，无法从传统标定板提取足够多点坐标信息。针对这一问题，提出一种基于二次曲线与直线的混合标定方法。该方法抛弃了利用点对点关系的标定方法，转而利用二次曲线方程及直线方程在两种坐标系下相对应的关系进行标定，使摄像机即使是在非常小的范围内仍然能够提取足够的信息进行标定。仿真与实验证明，相对于基于点的标定方法，混合标定方法精度高，具有更好的稳健性。另外，标定模板为一个标准的半圆，制作简单，方便应用到小视场的环境中。

Abstract

Camera calibration aims at building up the mapping relationship between 3D world coordinate and 2D image coordinate. The traditional calibration board contains dozens of neatly arranged standard circles or grids. Calibration is completed by extracting the center coordinates of standard circles or grid corner coordinates. In a micro-object measurement system, the camera field of view is very small and camera cannot extract enough points from the calibration board. To solve this problem, a new method based on conic and lines is proposed. This method uses conic and lines equation instead of points to calibrate so that enough information can be extracted from calibration board even under small field of view. Both computer simulation and real data test show that the proposed method has higher accuracy and better robustness. In addition, the calibration board is a standard semicircle which is very easy to be made and easy to be used under small field of view.

参考文献

[1] R. Tsai, R. K. Lenz. A new technique for fully autonomous and efficient 3D robotics hand/eye calibration［J］. IEEE T. Robot. Automat., 1989, 5(3): 345～358

[2] J. Y. Weng, P. Cohen, M. Herniou. Camera calibration with distortion models and accuracy evaluation［J］. IEEE T. Pattern Anal., 1992, 14(10): 965～980

[3] Z. Zhang. A flexible new technique for camera calibration［J］. IEEE T. Pattern Anal., 2000, 22(11): 1330～1334

[4] 孟晓桥, 胡占义. 一种新的基于圆环点的摄像机自标定方法［J］. 软件学报, 2002, 13(5): 957～965

Meng Xiaoqiao, Hu Zhanyi. A new easy camera calibration technique based on circular points［J］. Journal of Software, 2002, 13(5): 957～965

[5] W. J. Ma, Y. Q. Zheng, Y. C. Liu. Camera calibration using two concentric circles: linear approach［J］. Opt. Engng., 2009, 48(5): 053602

[6] 杨长江, 孙凤梅, 胡占义. 基于平面二次曲线的摄像机标定［J］. 计算机学报, 2000, 23(5): 541～547

Yang Changjiang, Sun Fengmei, Hu Zhanyi. Planar conic based camera calibration［J］. Chinese Journal of Computers, 2000, 23(5): 541～547

[7] P. F. Sturm, S. J. Maybank. On plane-based camera calibration: a general algorithm singularities, applications［C］. Colorado: Proc. IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 1999, 1: 432～437

[8] Carlos Ricolfe Viala. Camera calibration under optimal conditions［J］. Opt. Express, 2011, 19(11): 10769～10775

[9] 边心田, 苏显渝, 陈文静. 基于反向摄影的三维坐标测量方法［J］. 中国激光, 2010, 37(7): 1832～1836

Bian Xintian, Su Xianyu, Chen Wenjing. A novel three-dimensional coordinates measurement method based on inverse photogrammetry［J］. Chinese J. Lasers, 2010, 37(7): 1832～1836

[10] 朱嘉, 李醒飞, 徐颖欣. 摄像机的一种主动视觉标定方法［J］. 光学学报, 2010, 30(5): 1297～1303

Zhu Jia, Li Xingfei, Xu Yingxin. Camera calibration technique based on active vision［J］. Acta Optica Sinica, 2010, 30(5): 1297～1303

[11] O. Faugeras, Q. T. Luong, S. Maybank. Camera self-calibration: Theory and experiments［C］. Italy: Proc. 2nd European Conference on Computer Vision, 1992. 321～334

[12] S. Maybank, O. Faugeras. A theory of self-calibration of a moving camera［J］. Int. J. Comput. Vision, 1992, 8(2): 123～151

[13] F. Yilmazturk. Full-automatic self-calibration of color digital cameras using color targets［J］. Opt. Express, 2011, 19(19): 18164～18174

[14] 霍炬, 杨卫, 杨明. 基于消隐点几何特性的摄像机自标定方法［J］. 光学学报, 2010, 30(2): 465～472

Huo Ju, Yang Wei, Yang Ming. A self-calibration technique based on the geometry property of the vanish point［J］. Acta Optica Sinica, 2010, 30(2): 465～472

[15] 李勤, 达飞鹏, 温晴川. 任意方向下的摄像机镜头畸变标定［J］. 仪器仪表学报, 2010, 31(9): 2022～2027

Li Qin, Da Feipeng, Wen Qingchuan. Calibrating lens distortion of camera in all directions［J］. Chinese Journal of Scientific Instrument, 2010, 31(9): 2022～2027

[16] R. Tsai. A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses［J］. IEEE J. Robot. Automat., 1987, 3(4): 323～344

郭涛, 达飞鹏, 方旭. 小视场环境下的摄像机标定[J]. 中国激光, 2012, 39(8): 0808001. Guo Tao, Da Feipeng, Fang Xu. Camera Calibration under Small Field of View[J]. Chinese Journal of Lasers, 2012, 39(8): 0808001.

小视场环境下的摄像机标定

关于本站 Cookie 的使用提示

全站搜索

小视场环境下的摄像机标定

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索