平行光干涉投影三维形貌恢复方法

王一; 刘会艳; 宋宝根

doi:doi:10.5768/jao201738.0503004

应用光学, 2017, 38 (5): 798, 网络出版: 2017-10-12

平行光干涉投影三维形貌恢复方法

Three dimensional shape restoration method with parallel light interference projection

论文大纲

王一刘会艳宋宝根

作者单位

华北理工大学电气工程学院，河北唐山 063210

摘要

传统傅立叶变换轮廓术多采用散光斜式投影，需要满足4个约束条件才能得到较为准确的相位与高度映射关系，并且散光投影带来的相位非线性二次项误差也会降低形貌恢复精度。为了能在欠约束条件下减少相位非线性误差的影响，建立了基于平行光干涉投影下的普适模型。平行光干涉投影下的参考平面相位沿着x轴呈线性变化，相位分布较散光或倾斜式投影更具准确性。对比分析了散光及平行光投影下被测物体的恢复情况，实验结果表明，新模型在欠约束条件下，具有较高的灵活性和可操作性，恢复精度良好，相对误差为1.1%。

Abstract

In traditional Fourier transform profilometry, the astigmatism projection is used and 4 constraints are needed to obtain accurate mapping relationship between phase and height . Moreover, the phase nonlinear quadratic error caused by astigmatic projection can also reduce the topographic recovery accuracy. In order to reduce the influence of phase nonlinearity in less restricted conditions, a universal model based on parallel optical interference projection was established. The reference plane phase under the parallel optical interference projection changes linearly along x-axis, the phase distribution is more accurate than the astigmatic projection or oblique projection. The restoration of the measured object under astigmatism and parallel light projection was compared and analyzed. The experimental results show that the new model has high flexibility and operability under less restricted conditions, and the recovery accuracy is good, the relative error is 1.1%.

参考文献

[1] Takeda M, Mutoh K. Fourier transform profilometry for the automatic measurement 3D object shapes［J］.Applied Optics,1983, 22(24):3977-3982.

[2] 尚忠义, 李伟仙, 董明利，等. 基于四步相移光栅投影的三维形貌测量系统［J］. 应用光学, 2015, 36(4):584-589.

Shang Zhongyi, Li Weixian, Dong Mingli, et al. 3D shape measurement system based on fringe projection profilometry in 4-step phase shifting［J］. Journal of Applied Optics, 2015, 36(4):584-589.

[3] 吴双卿, 张引, 张三元, 等. 傅里叶变换轮廓术物体三维形貌测量的系统分析及其坐标校准方法［J］. 光学学报, 2009, 29(10):2780-2785.

Wu Shuangqing, Zhang Yin, Zhang Sanyuan, et al. Analysis of three-dimensional measurement system and the coordinates calibration in Fourier transform profilometry［J］. Acta Optica Sinica, 2009, 29(10):2780-2785.

[4] 肖焱山, 曹益平, 武迎春. 条纹投影轮廓术中新的相位高度映射算法［J］. 中国激光, 2011, 38(2):188-194.

Xiao Yanshan, Cao Yiping, Wu Yingchun. A new phase-to-height mapping algorithm in fringe projection profilometry ［J］. Chinese Journal of Lasers, 2011, 38(2):188-194.

[5] 毛先富, 陈文静, 苏显渝. 傅里叶变换轮廓术新理论研究［J］. 中国激光, 2007, 34(1):99-104.

Mao Xianfu, Chen Wenjing, Su Xianyu. Analysis on an improved Fourier transform profilometry［J］. Chinese Journal of Lasers, 2007, 34(1):99-104.

[6] 文永富, 苏显渝, 张启灿. 傅里叶变换轮廓术中一种普适的计算公式和系统标定方法［J］. 中国激光, 2009, 36(8):2094-2098.

Wen Yongfu, Su Xianyu, Zhang Qican. Universal calculation formula and system calibration method in Fourier transform profilometry［J］. Chinese Journal of Lasers, 2009, 36(8):2094-2098.

[7] Wen Y F, Li S K, Cheng H B, et al. Universal calculation formula and calibration method in Fourier transform profilometry［J］. Applied Optics, 2010, 49(34):6563-6569.

[8] 邓勇, 陈康, 李继扬. 基于正交偏振双纵模的氦氖激光器纳米测尺系统［J］. 应用光学, 2017, 38(2):316-320.

Deng Yong, Chen Kang, Li Jiyang. He-Ne laser nanometer ruler system based on orthogonal polarization double longitudinal mode ［J］. Journal of Applied Optics, 2017, 38(2):316-320.

[9] 张湧涛, 王祎泽, 王一, 等. 电光材料调制误差对平行光束干涉投影的影响［J］. 应用光学, 2016, 37(2):235-239.

Zhang Yongtao, Wang Yize, Wang Yi, et al. Effect of electro-optic material modulation error on parallel beam interference projection［J］. Journal of Applied Optics, 2016, 37(2):235-239.

[10] 范琦, 王云飞, 杨百愚, 等. 基于相位恢复的光学元件面形检测技术研究［J］. 应用光学, 2015, 36(2):242-246.

Fan Qi, Wang Yunfei, Yang Baiyu, et al. Testing optical surface with phase recovery［J］. Journal of Applied Optics, 2015, 36(2):242-246.

[11] 孙宇臣, 葛宝臻, 张以谟. 物体三维信息测量技术综述［J］. 光电子·激光, 2004, 15(2):248-254.

Sun Yuchen, Ge Baozhen, Zhang Yimo. Review for the 3D information measuring technology［J］. Journal of Optoelectronics Laser, 2004, 15(2):248-254.

[12] Zappa E, Busca G. Fourier transform profilometry calibration based on an exhaustive geometric model of the system ［J］. Optics and Lasers in Engineering, 2009, 47(7):754-767.

[13] Leah M, Wang Y J, Zhang S. Accurate calibration for 3D shape measurement system using a binary defocusing technique ［J］. Optics and Lasers in Engineering, 2013, 51(5):514-519.

[14] 安冬, 达飞鹏, 盖绍彦, 等. 新的基于条纹投影轮廓测量的系统标定方法［J］. 应用光学, 2014, 35(1):81-84.

An Dong, Da Feipeng, Gai Shaoyan, et al. New system calculation method based on fringe projection profilometry［J］. Journal of Applied Optics, 2014, 35(1):81-84.

王一, 刘会艳, 宋宝根. 平行光干涉投影三维形貌恢复方法[J]. 应用光学, 2017, 38(5): 798. Wang Yi, Liu Huiyan, Song Baogen. Three dimensional shape restoration method with parallel light interference projection[J]. Journal of Applied Optics, 2017, 38(5): 798.

平行光干涉投影三维形貌恢复方法

关于本站 Cookie 的使用提示

全站搜索

平行光干涉投影三维形貌恢复方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索