熔融石英玻璃无水环境固结磨粒抛光特性
[1] Hawleyfedder R A, Stolz C J, Menapace J A, et al. NIF optical materials and fabrication technologies: an overview[C]//Proc of SPIE. 2004, 5341:102-105.
[2] 郑万国, 魏晓峰, 朱启华, 等. 神光-Ⅲ主机装置成功实现60 TW/180 kJ 三倍频激光输出[J]. 强激光与粒子束, 2016, 28: 019001. (Zheng Wanguo, Wei Xiaofeng, Zhu Qihua, et al. SG-Ⅲ laser facility has successfully achieved 60 TW/180 kJ ultraviolet laser (351 nm) output. High Power Laser and Particle Beams, 2016, 28: 019001)
[3] Moses E I, Campbell J N, Stolz C J, et al. The National Ignition Facility: The world’s largest optics and laser system [C]//Proc of SPIE. 2003, 5001: 1-15.
[4] 叶卉,杨炜, 胡陈林, 等. 磨削加工光学元件亚表面损伤探究[J]. 强激光与粒子束, 2014, 26 : 092010. (Ye Hui, Yang Wei, Hu Chenlin, et al. Subsurface damage of ground optical elements. High Power Laser and Particle Beams, 2014, 26 :092010)
[5] 林晓辉, 马凯威, 黄海滨, 等. 轴对称非球面磨削表面粗糙度和波纹度的分布特性[J]. 强激光与粒子束, 2015, 27: 092013. (Lin Xiaohui, Ma Kaiwei, Huang Haibin, et al. Distribution characteristics of surface roughness and waviness error in axisymmetric aspheric grinding. High Power Laser and Particle Beams, 2015, 27: 092013)
[6] 杨炜, 郭隐彪, 许乔, 等. 超精抛光中边缘效应对材料去除量的影响 [J]. 强激光与粒子束, 2008,20(10): 1653-1657. (Yang Wei, Guo Yinbiao, Xu Qiao, et al. Edge effects on material removal amount in ultra-precise polishing process. High Power Laser and Particle Beams, 2008,20(10): 1653-1657)
[7] Li Yaguo, Hou Jing, Xu Qiao, et al. The characteristics of optics polished with a polyurethane pad[J]. Optics Express, 2008, 16(14): 10285-10293.
[8] Gillman B E, Jacobs S D. Bound-abrasive polishers for optical glass.[J]. Applied Optics, 1998, 37(16):3498.
[9] Zhou L,Eda H, Shimizu J, et al. Defect-free fabrication for single crystal silicon substrate by chemo-mechanical grinding[J]. CIRP Annals-Manufacturing Technology, 2006, 55(1):313-316.
[10] Li Yaguo, Wu Yongbo, Zhou Libo, et al. Vibration-assisted dry polishing of fused silica using a fixed-abrasive polisher[J]. International Journal of Machine Tools & Manufacture, 2014, 77(1):93-102.
[11] Tian Y B, Zhou L, Shimizu J, et al. Elimination of surface scratch/texture on the surface of single crystal Si substrate in chemo-mechanical grinding (CMG) process[J]. Applied Surface Science, 2009, 255(7):4205-4211.
[12] Cook L M.Chemical processes in glass polishing [J]. Journal of Non Crystalline Solids, 1990, 120(1):152-171.
[13] Osseo-Asare K. Surface chemical processes in chemical mechanical polishing relationship between silica material removal rate and the point of zero charge of the abrasive material[J]. Journal of the Electrochemical Society, 2002, 149(12):G651-G655.
[14] Preston F W. The structure of abraded glass surfaces[J]. Transactions of the Optical Society, 1922, 23(3):141.
[15] Block H. Seizure delay method for determining the protection against scuffing afforded by extreme lubricants[J]. Society of Auto Engrs, 1939, 44(5):193-210.
刘文俊, 杨炜, 郭隐彪. 熔融石英玻璃无水环境固结磨粒抛光特性[J]. 强激光与粒子束, 2018, 30(8): 082001. Liu Wenjun, Yang Wei, Guo Yinbiao. Characteristic of bounded abrasive polishing for fused silica glass in anhydrous environment[J]. High Power Laser and Particle Beams, 2018, 30(8): 082001.