强激光与粒子束, 2010, 22 (4): 765, 网络出版: 2010-06-22  

多路初级绕组脉冲变压器固态调制器

Solid state modulator based on multi-primary winding pulse transformer
朱永亮 1,2,*王玮 1,2
作者单位
1 芜湖国睿兆伏电子股份有限公司,安徽 芜湖 241007
2 南京电子技术研究所,南京 210013
摘要
介绍了一种输出峰值功率在MW量级,工作频率和脉冲宽度均连续可调的高功率固态脉冲调制器的设计。脉冲调制器的放电回路采用先进的固态开关技术,以实现频率和脉宽的连续可调。调制器输出采用升压型多路初级绕组脉冲变压器,以降低励磁单元的工作电压和工作电流,同时避免了由于固态开关串并联而导致的电路复杂设计问题。系统采用在励磁回路中添加补偿网络的方法提高输出脉冲的平顶度。采取以上这些技术设计的固态调制器工程样机输出脉冲峰值电压为48 kV、宽度1.0~4.5 μs、重复频率20~300 Hz、脉冲顶降小于1%,可以作为磁控管调制器应用在粒子加速器系统中。
Abstract
A solid state modulator with peak output power up to several MW is introduced in this paper. This kind modulator is characterized by repetitive frequency and easily-adjustable width of the output pulse for utilization in solid state switch. Storage capacitors of the modulator are charged by HF-inverter charging power supply in constant current mode. A step-up multi-primary winding transformer is applied to decreasing each exciting unit’s operation voltage and current,which could avoid circuit complexities caused by solid state devices connecting in series or parallel. RL pulse compensating network is introduced to counteract top-droop caused by pulse transformer or low capacitance of storage capacitors. With above methods,A magnetron modulator with a peak output voltage of 48 kV,a pulse width of 1.0~4.5 μs,a repetitive frequency of 20~300 Hz,a top-droop of less than 1% has been designed,and it could be used as the particle accelerator’s RF power source.
参考文献

[1] 郑新,李文辉,潘厚忠,等.雷达发射机技术[M].北京:电子工业出版社,2006:240-243.(Zheng Xin,Li Wenhui,Pan Houzhong,et al. Radar transmitter techniques. Beijing: Publishing House of Electronics Industry,2006:240-243)

[2] 王相綦,何宁,冯德仁,等.MOSFET调制器的实验研究[J].强激光与粒子束,2006,18(9):1569-1572.(Wang Xiangqi,He Ning,Feng Deren,et al. Experimental study on MOSFET modulator. High Power Laser and Particle Beams,2006,18(9):1569-1572)

[3] 蔡政平,曹湘军,徐旭哲,等.180 kW全固态高压脉冲调制器的设计[J].高电压技术,2007,33(3):167-170.(Cai Zhengping,Cao Xiangjun,Xu Xuzhe,et al. Design of a 180 kW solid-state modulator. High Voltage Engineering,2007,33(3):167-170)

[4] 尚雷,谭泓,丛晓艳,等.大功率IGBT在固态脉冲调制器中的应用[J].电力电子技术,2007,41(4):56-57.(Shang Lei,Tan Hong,Cong Xiaoyan,et al. Application of 3.3 kV/ 800 IGBT in high power solid state modulator. Power Electronics,2007,41(4):56-57)

[5] 戴广明,田为,黄军.新型大功率全固态调制器[J].电力电子技术,2004,38(5):63-65.(Dai Guangming,Tian Wei,Huang Jun. New kind of all-solid-state modulator. Power Electronics,2004,38(5):63-65)

[6] 林渭勋.现代电力电子电路[M].杭州:浙江大学出版社,2002:59-69.(Lin Weixun. Modern power electronic circuits. Hangzhou: Zhejiang University Press,2002:59-69)

[7] 电子变压器手册[M].沈阳:辽宁科学技术出版社,1998:351-352.(Electronic transformer design handbook. Shenyang: Liaoning Science and Technology Publishing House,1998:351-352)

朱永亮, 王玮. 多路初级绕组脉冲变压器固态调制器[J]. 强激光与粒子束, 2010, 22(4): 765. Zhu Yongliang, Wang Wei. Solid state modulator based on multi-primary winding pulse transformer[J]. High Power Laser and Particle Beams, 2010, 22(4): 765.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!