非接触式三维重建测量方法综述 下载: 2597次
[1] Krajewski G, Woz'niak A. Simple master artefact for CMM dynamic error identification[J]. Precision Engineering, 2014, 38(1): 64-70.
[2] 黄强先, 余夫领, 宫二敏, 等. 零阿贝误差的纳米三坐标测量机工作台及误差分析[J]. 光学 精密工程, 2013, 21(3): 664-671.
[3] 李建丽, 辛倩倩, 田 丽, 等. 大型锻件在线尺寸测量方法综述[J]. 新型工业化, 2014, 4(1): 59-64.
Li Jianli, Xin Qianqian, Tian Li, et al. A review of online measurement method for large forgings[J]. New Industrialization Straregy, 2014, 4(1): 59-64.
[4] 熊利郎, 潜 冬, 李海珠. 基于实时性的三维重建综述[J]. 中国传媒大学学报(自然科学版), 2013, 20(6): 38-43.
Xiong Lilang, Qian Dong, Li Haizhu. Overview of three-dimensional reconstruction based on real-time[J]. Journal of Communication University of China(Science and Technology), 2013, 20(6): 38-43.
[5] Akuta T, Negishi Y. Development of an automatic 3-D shape measurement system using a new auto-focusing method[J]. Measurement, 1991, 9(3): 98-103.
[6] 刘子伟, 许廷发, 王洪庆, 等. 深度成像理论与实现[J]. 红外与激光工程, 2016, 45(7): 242-246.
Liu Ziwei, Xu Tingfa, Wang Hongqing, et al. Theory and implementation of depth photography[J]. Infrared and Laser Engineering, 2016, 45(7): 242-246.
[7] Markus-Christian A, Thierry M, Marc L, et al. Laser ranging: a critical review of unusual techniques for distance measurement[J]. Optical Engineering, 2001, 40(1): 10-19.
[8] 李永怀, 冯其波. 光学三维轮廓测量技术进展[J]. 激光与红外, 2005, 35(3): 143-147.
Li Yonghuai, Feng Qibo. Overview of optical 3D profile measurement[J]. Laser & Infrared, 2005, 35(3): 143-147.
[9] 王 锋. 外差式正弦相位调制纳米位移测距试验新算法的实现[D]. 北京: 中国科学院大学, 2010.
Wang Feng. Implementation of a new algorithm for heterodyne displacement measurement based on heterodyne sinusoidal phase modulation[D]. Beijing: University of Chinese Academy of Sciences, 2010.
[10] 王晓嘉, 高 隽, 王 磊. 激光三角法综述[J]. 仪器仪表学报, 2004, 25(z3): 601-608.
Wang Xiaojia, Gao Jun, Wang Lei. Survey on the laser triangulation[J]. Chinese Journal of Scientific Instrument, 2004, 25(z3): 601-608.
[11] 郭红卫, 陈明仪. 工件特征点三维坐标视觉测量方法综述[J]. 光学 精密工程, 2000, 8(2): 192-198.
Guo Hongwei, Chen Mingyi. Analysis of 3-D coordinate vision measuring methods with feature points on workpiece[J]. Optics and Precision Engineering, 2000, 8(2): 192-198.
[12] Yoshida K, Shigeo H. Laser triangulation range finder available under direct sunlight[C]. IEEE International Conference on Robotics and Automation, 1988, 24(5): 1702-1708.
[13] 袁满满, 穆平安, 戴曙光. 基于改进ICP算法的线结构光扫描系统误差校准[J]. 电子科技, 2016, 29(6): 178-181.
Yuan Manman, Mu Ping′an, Dai Shuguang. Installation error calibration based on line structure improved ICP optical scanning system[J]. Electronic Science and Technology, 2016, 29(6): 178-181.
[14] Araki K, Shimizu M, Noda T, et al. A high-speed and continuous 3D measurement system[J]. Machine Vision and Applications, 1995, 8(2): 79-84.
[15] 刘 斌, 沈 康, 魏兆超, 等. 基于线结构光视觉技术的微小直径高精度测量系统[J]. 仪器仪表学报, 2014, 35(C2): 126-129.
Liu Bin, Shen Kang, Wei Zhaochao, et al. High-precision measurement system for micro-diameter based on structured-light vision technology[J]. Chinese Journal of Scientific Instrument, 2014, 35(C2): 126-129.
[16] 解则晓, 陈文柱, 迟书凯, 等. 基于结构光视觉引导的工业机器人定位系统[J]. 光学学报, 2016, 36(10): 1015001.
[17] Lilienblum E, Al-Hamadi A. A structured light approach for 3D surface reconstruction with a stereo line-scan system[C]. IEEE Transactions on Instrumentation and Measurement, 2015, 64(5): 1266-1274.
[18] Yee S R, Griffin P M. Three-dimensional imaging system[J]. Optical Engineering, 1994, 33(6): 2070-2075.
[19] Commean P K, Smith K E, Bhatia G H, et al. Geometric design of a multisensor structured light range digitizer[J]. Optical Engineering, 1994, 33(4): 1349-1358.
[20] Ito M, Ishii A. A three-level checkerboard pattern(TCP) projection method for curved surface measurement[J]. Pattern Recognition, 1995, 28(1): 27-40.
[21] 李 彪, 吴海涛, 张建成, 等. 正弦脉冲宽度调制条纹结合相位编码条纹的三维测量方法[J]. 红外与激光工程, 2016, 45(6): 179-184.
Li Biao, Wu Haitao, Zhang Jiancheng, et al. 3D shape measurement method combining sinusoidal pulse width modulation fringe with phase coding fringe[J]. Infrared and Laser Engineering, 2016, 45(6): 179-184.
[22] 刘卫亮. 基于结构光三维测量的大锻件图像处理算法的研究[D]. 上海: 东华大学, 2014.
Liu Weiliang. Research on large forgings image processing algorithms based on structured light three-dimensional measurement[D]. Shanghai: Donghua University, 2014.
[23] Pikas J, Summa J. 3D structured light measurement and analysis of corrosion and related defects[C]. Dallas: Corrosion Conference and Expo, 2015, 2(7): 1-16.
[24] Chen X D, Yang Y H. Scene adaptive structured light using error detection and correction[J]. Pattern Recognition, 2015, 48(1): 220-230.
[25] Yu Yongyan, Shu Yuqin. 3D measurement and reconstruction based on structured light[C]. Chongqing: First International Conference on Information Sciences, Machinery, Materials and Energy, 2015.
[26] 罗 兵, 薛 敏. 基于平面估计的三维测量相位展开新方法[J]. 计算机测量与控制, 2016, 24(9): 43-46.
Luo Bing, Xue Min. PMP phase unwrapping new method based on plain estimation[J]. Computer Measurement & Control, 2016, 24(9): 43-46.
[27] 杨 洋, 龙云飞, 吴 炜, 等. 消除相位测量轮廓术中多路径效应的影响[J]. 强激光与粒子束, 2015, 27(4): 73-77.
Yang Yang, Long Yunfei, Wu Wei, et al. Eliminating phase error caused by multi-path effect for phase measuring profilometry[J]. High Power Laser and Particle Beams, 2015, 27(4): 73-77.
[28] 刘 晨, 费业泰, 卢荣胜, 等. 主动三维视觉传感技术的研究[J]. 半导体光电, 2006, 27(5): 618-621.
Liu Chen, Fei Yetai, Lu Rongsheng, et al. 3-D active vision sensing technique[J]. Semiconductor Optoelectronics, 2006, 27(5): 618-621.
[29] 程冬梅. 基于时域相位展开三维轮廓测量的研究[D]. 天津: 天津大学, 2004.
Cheng Dongmei. Research on 3D profile measurement based on phase unwrapping in time domain[D]. Tianjin: Tianjin University, 2004.
[30] Chen L C, Nguyen X L, Zhang F H, et al. High-speed Fourier transform profilometry for reconstructing objects having arbitrary surface colours[J]. Journal of Optics, 2010, 12(9): 095502.
[31] Da F P, Huang H. A fast, accurate phase unwrapping method for wavelet-transform profilometry[J]. Optics Communications 2012, 285(4): 421-432.
[32] Chen Liang-Chia, Hai Hoang Hong. Fourier transform profilometry employing novel orthogonal elliptic band-pass filtering for accurate 3-D surface reconstruction[J]. Precision Engineering, 2014, 38(3): 512-524.
[33] Zhang Zonghua. Comparison of Fourier transform, windowed Fourier transform, and wavelet transform methods for phase calculation at discontinuities in fringe projection profilometry[J]. Optics and Lasers in Engineering, 2012, 50(8): 141-148.
[34] 肖素枝. 基于编码光栅的空间不连续三维物体表面的绝对相位获取方法[J]. 光学学报, 2016, 36(12): 1212004.
[35] 耿东锋, 何英杰, 苏宏毅. 透明台阶的白光干涉测量方法研究[J]. 光学仪器, 2013, 35(6): 74-77.
[36] Bingleman L W, Schajer G S. DIC-based surface motion correction for ESPI measurements[J]. Experimental Mechanics, 2011, 51(7): 1207-1216.
[37] 孙流星, 于瀛洁. 基于相移和颜色分光的电子散斑干涉瞬态三维变形测量方法[J]. 光学仪器, 2016, 38(1): 20-26.
[38] 许焕坤. 散斑干涉技术的应用及其精度分析[D]. 广州: 广东工业大学, 2012.
Xu Huankun. Application and accuracy analysis of speckle interferometry[D]. Guangzhou: Guangdong University of Technology, 2012.
[39] Richoz G, Schajer G S. Simultaneous ESPI measurements using multiple wavelengths and a color camera[C]. Advancement of Optical Methods in Experimental Mechanics, 2014, 3: 349-356.
[40] 魏 巍, 郑永果. 基于光线投射算法的医学图像三维重建方法综述[J]. 电脑知识与技术, 2010, 6(10): 2470-2471.
Wei Wei, Zheng Yongguo. The overview about 3D reconstruction of medical image based on ray-casting method[J]. Computer Knowledge and Technology, 2010, 6(10): 2470-2471.
[41] 佟 帅, 徐晓刚, 易成涛, 等. 基于视觉的三维重建技术综述[J]. 计算机应用研究, 2011, 28(7) : 2411-2417.
Tong Shuai, Xu Xiaogang, Yi Chengtao, et al. Overview on vision-based 3D reconstruction[J]. Application Research of Computers, 2011, 28(7): 2411-2417.
[42] 孙宇阳. 基于单幅图像的三维重建技术综述[J]. 北方工业大学学报, 2011, 23(1): 9-13.
Sun Yuyang. A survey of 3D reconstruction based on single image[J]. Journal of North China University of Technology, 2011, 23(1): 9-13.
[43] 王 宇, 张 旭, 李 晨, 等. 基于光场成像的三维测量方法的研究[J]. 仪器仪表学报, 2015, 36(6): 1311-1318.
Wang Yu, Zhang Xu, Li Chen, et al. Study on the three-dimensional measurement technology based on light field imaging[J]. Chinese Journal of Scientific Instrument, 2015, 36(6): 1311-1318.
[44] 姚成文, 雷 海, 常新宇, 等. 微球三维位置快速精密测量的新方法[J]. 光学学报, 2017, 37(1): 0112002.
[45] 陈宇峰, 谭文静, 王海涛, 等. 光度立体三维重建算法[J]. 计算机辅助设计与图形学学报, 2005, 17(11): 28-34.
Chen Yufeng, Tan Wenjing, Wang Haitao, et al. Photometric stereo 3D reconstruction and application[J]. Journal of Computer-Aided Design & Computer Graphics, 2005, 17(11): 28-34.
[46] 徐 科, 周 鹏, 杨朝霖. 基于光度立体学的金属板带表面微小缺陷在线检测方法[J]. 机械工程学报, 2013, 49(4): 25-29.
Xu Ke, Zhou Peng, Yang Chaolin. On-line detection technique of tiny surface defects for metal plates and strips based on photometric stereo[J]. Journal of Mechanical Engineering, 2013, 49(4): 25-29.
[47] 蔡轶珩, 张琳琳, 盛 楠, 等. 基于光度立体法的中医舌体三维表面重建[J]. 电子与信息学报, 2015, 37(11): 2564-2570.
Cai Yiheng, Zhang Linlin, Sheng Nan, et al. 3D reconstruction of tongue surface based on photometric stereo method[J]. Journal of Electronics & Information Technology, 2015, 37(11): 2564-2570.
[48] 张珊珊, 吕东辉, 孙九爱. 近光源光度立体三维重建误差分析[J]. 计算机技术与发展, 2015, 25(1): 168-172.
Zhang Shanshan, Lü Donghui, Sun Jiuai. 3D reconstruction error analysis on photometric stereo with nearby light sources[J]. Computer Technology and Development, 2015, 25(1): 168-172.
[49] 李 健, 杜瑞希, 梁 洁, 等. 融合RGB-D相机和光度立体的三维数字化方法研究[J]. 陕西科技大学学报(自然科学版), 2016, 34(4): 161-165.
Li Jian, Du Ruixi, Liang Jie, et al. Research on 3D digitizing method fusing RGB-D camera and photometric stereo[J]. Journal of Shaanxi University of Science and Technology(Natural Science Edition), 2016, 34(4): 161-165.
[50] Fonstad M A, Dietrich J T, Courville B C, et al. Topographic structure from motion: a new development in photogrammetric measurement[J]. Earth Surface Processes and Landforms, 2013, 38(4): 421-430.
[51] 魏占玉, Arrowsmith Ramon, 何宏林, 等. 基于SfM方法的高密度点云数据生成及精度分析[J]. 地震地质, 2015, 37(2): 638-648.
Wei Zhanyu, Arrowsmith Ramon, He Honglin, et al. Accuracy analysis of terrain point cloud acquired by"Structure from Motion" using aerial photos[J]. Seismology and Geology, 2015, 37(2): 638-648.
[52] Goesele M, Snavely N, Curless B, et al. Multi-view stereo for community photo collections[C]. IEEE International Conference on Computer Vision, 2007: 1-8.
[53] 陈 坤, 刘新国. 基于光线的全局优化多视图三维重建方法[J]. 计算机工程, 2013, 39(11): 235-239.
Chen Kun, Liu Xinguo. Global optimized multi-view 3D reconstruction method based on rays[J]. Computer Engineering, 2013, 39(11): 235-239.
[54] 管 秋, 金俊杰, 张剑华, 等. 基于最优RANSAC算法的非增加式多视图三维重建[J]. 浙江工业大学学报, 2015, 43(5): 473-478.
Guan Qiu, Jin Junjie, Zhang Jianhua, et al. Non-sequential multi-view 3D reconstruction based on ac-ransac[J]. Journal of Zhejiang University of Technology, 2015, 43(5): 473-478.
[55] Soheilian B, Paparoditis N, Vallet B. Detection and 3D reconstruction of traffic signs from multiple view color images[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2013, 77(3): 1-20.
[56] Drizdal T, Paulides M M, Linthorst M, et al. Reconstruction of applicator positions from multiple-view images for accurate superficial hyperthermia treatment planning[J]. Physics in Medicine and Biology, 2012, 57(9): 2491-2503.
[57] 曹 煜, 陈秀宏. 基于图像轮廓的三维重建方法[J]. 计算机工程与应用, 2012, 48(6): 205-208.
Cao Yu, Chen Xiuhong. 3D reconstruction method based on image silhouette[J]. Computer Engineering and Applications, 2012, 48(6) : 205-208.
丁少闻, 张小虎, 于起峰, 杨夏. 非接触式三维重建测量方法综述[J]. 激光与光电子学进展, 2017, 54(7): 070003. Ding Shaowen, Zhang Xiaohu, Yu Qifeng, Yang Xia. Overview of Non-Contact 3D Reconstruction Measurement Methods[J]. Laser & Optoelectronics Progress, 2017, 54(7): 070003.