三维激光扫描技术在船舶排水量计量中的应用

张吉星; 程效军; 程小龙

doi:doi:10.3788/cjl201643.1204003

中国激光, 2016, 43 (12): 1204003, 网络出版: 2016-12-09

三维激光扫描技术在船舶排水量计量中的应用下载： 548次

Application of Three-Dimensional Laser Scanning Technology in Measurement of Ship Displacement

论文大纲

张吉星 ^1,*程效军 ^1,2程小龙 ¹

作者单位

¹ 同济大学测绘与地理信息学院, 上海 200092

² 现代工程测量国家测绘地理信息局重点实验室, 上海 200092

AI 词云图 AI语音精读 AI语音超短摘要

注：本部分内容由 AI 自动生成，请您知悉。

摘要

针对传统排水量计量方法工作强度大、效率低等缺点，依托近年来迅速发展的三维激光扫描技术，提出了一种基于点云切片技术的排水量计量方法。该方法将船舶点云沿着z轴分割成若干切片点云，利用三角形面积法计算切片上下横截面面积，最终计算出每个切片的体积并累加获得船舶排水量。此外，通过建立船舶的三维模型，利用软件获得对应高度的排水量，并以此作为参考值与该方法的结果进行对比，最后计算计量结果的相对扩展不确定度。经实验验证，该方法能够以较高的精度获取船舶排水量，为船舶排水量的计量提供了一种全新的技术手段。

Abstract

Traditional methods of calculating displacement often have certain shortcomings and drawbacks such as high labor intensity and low efficiency. With the help of the 3D laser scanning technique, this paper introduces a displacement computation method based on point cloud slicing technique. The proposed method first segments the point cloud into several point cloud slices along z-axis. The triangle-area-integration method is adopted to calculate the cross-sectional area of each slice. The displacement can be calculated through the accumulation of each slice volume. To compare the results of the proposed methods, the displacement results of corresponding heights computed by commercial software are taken as a reference. Then we calculate the relative expanding uncertainty of the measurement results. The test results indicate that the proposed method can calculate the displacement with high accuracy, thus providing the displacement calculation with a new approach.

参考文献

[1] 徐洪祥, 马俊园, 杨奥, 等. 船舶排水量不同计算方法的对比与分析[J]. 中国集体经济, 2012, 10: 186-187.

[2] 崔建辉, 赵猛, 王永洲. 邦戎曲线与静水力曲线计算船舶排水量的比较[J]. 航海技术, 2013(3): 25-28.

[3] 胡敏捷, 阎利, 张毅. 基于舱室三维重建模型的舱容计量技术研究[J]. 船舶设计通讯, 2012(1): 61-66.

Hu Minjie, Yan Li, Zhang Yi. The research of tank capacity measurement technology depends on 3D reconstruction[J]. Journal of Ship Design, 2012(1): 61-66.

[4] 赵庆阳. 三维激光扫描仪数据采集系统研制[D]. 西安: 西安科技大学, 2008: 6-8.

Zhao Qinyang. 3D laser scanner data acquisition system developed[D]. Xi′an: Xi′an University of Science and Technology, 2008: 6-8.

[5] 谭凯, 程效军. 基于多项式模型的TLS激光强度值改正[J]. 中国激光, 2015, 42(3): 0314002.

Tan Kai, Cheng Xiaojun. TLS laser intensity correction based on polynomial model[J]. Chinese J Lasers, 2015, 42(3): 0314002.

[6] 梁雪敏. 大型储油洞穴容量计量技术研究[D]. 杭州: 中国计量学院, 2014: 30-32.

Liang Xuemin. A study on the capacity measurement techniques for the large oil storage caves[D]. Hangzhou: China Jiliang University, 2014: 30-32.

[7] 周晓雪. 三维激光扫描技术在立式金属罐容量计量中的应用研究[D]. 杭州: 中国计量学院, 2014: 23-28.

Zhou Xiaoxue. 3D laser scanner technology applying in vertical metal tank capacity measurement[D]. Hangzhou: China Jiliang University, 2014: 23-28.

[8] 程效军, 贾东峰, 程小龙. 海量点云数据处理理论与技术[M]. 上海: 同济大学出版社, 2014: 6-9.

[9] 程效军, 贾东峰, 刘燕萍. 海量点云数据轮廓特征线的快速生成算法[J]. 同济大学学报(自然科学版), 2012, 40(10): 1559-1563.

Cheng Xiaojun, Jia Dongfeng, Liu Yanping. A fast contour generation algorithm of massive point cloud data[J]. Journal of Tongji University (Natural Science), 2012, 40(10): 1559-1563.

[10] Liu G H, Wong Y S, Zhang Y F, et al. Error-based segmentation of cloud data for direct rapid prototyping[J]. Computer-Aided Design, 2002, 35(7): 633-645.

[11] Chen Y H, Ng C T, Wang Y Z. Data reducing in integrated reverse engineering and rapid prototyping[J]. International Journal of Computer Integrated Manufacturing, 1999, 12(2): 97-103.

[12] Zhang Y F, Wong Y S, Loh H T, et al. An adaptive slicing approach to modeling cloud data for rapid prototyping[J]. Journal of Materials Process Technology, 2003, 140(1-3): 105-109.

[13] Piegl L A, Tiller W. Algorithm for finding all k nearest neighbors[J]. Computer-Aided Design, 2002, 34(2): 167-172.

[14] 方芳, 程效军. 海量散乱点云快速压缩算法[J]. 武汉大学学报(信息科学版), 2013, 38(11): 1353-1357.

Fang Fang, Cheng Xiaojun. A fast data reducing method for massive scattered point clouds based on slicing[J]. Geomatics and Information Science of Wuhan University, 2013, 38(11): 1353-1357.

张吉星, 程效军, 程小龙. 三维激光扫描技术在船舶排水量计量中的应用[J]. 中国激光, 2016, 43(12): 1204003. Zhang Jixing, Cheng Xiaojun, Cheng Xiaolong. Application of Three-Dimensional Laser Scanning Technology in Measurement of Ship Displacement[J]. Chinese Journal of Lasers, 2016, 43(12): 1204003.

三维激光扫描技术在船舶排水量计量中的应用下载： 548次

关于本站 Cookie 的使用提示

全站搜索

三维激光扫描技术在船舶排水量计量中的应用 下载： 548次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

三维激光扫描技术在船舶排水量计量中的应用下载： 548次