[1] Avila S L，Santos Jr M A，Weinzierl D，et al．Maximum working volume evaluation in a non-canonical reverberation chamber［J］．IEEE Trans on Magnetics，2009，45(3)：1646-1649．

[2] Lerosey G，Rosny J D．Scattering cross section measurement in reverberation chamber［J］．IEEE Trans on Electromagnetic Compatibility，2007，49(2)：280-284．

[3] Madsen K，Hallbjorner P，Orlenius C．Models for the number of independent samples in reverberation chamber measurements with mechanical，frequency，and combined stirring［J］．IEEE Antennas and Wireless Propagation Lett，2004,33：48-51．

[4] Bruns C，Vahldieck R．A closer look at reverberation chambers 3-D simulation and experimental　verification［J］．IEEE Trans on Electromagnetic Compatibility,2005，47(5)：612-626．

[5] Coates A，Sasse H G，Coleby D E, et al. Validation of a three-dimensional transmission line matrix (TLM) model implementation of a mode-stirred reverberation chamber［J］.IEEE Trans on Electromagnetic Compatibility,2007,49(4):734-744．

[6] Yuan Z Y，He J L，Chen S M，et al．Evaluation of transmit antenna position in reverberation chamber［J］．IEEE Trans on Electromagnetic Compatibility，2007，49(1)：86-93．

[7] Hill D A. Boundary fields in reverberation chamber［J］.IEEE Trans on Electromagnetic Compatibility,2005,47(2): 281-290.

[8] 丁坚进．混响室理论、设计和测试［D］．北京：北京交通大学，2006．(Ding Jianjin．Theory， measurement and design of reverberation chamber．Beijing： Beijing Jiaotong University，2006)

[9] 袁智勇，李暾，陈水明，等．混响室设计与校准测试［J］．电波科学学报，2007，22（4）:571-576．(Yuan Zhiyong，Li Tun，Chen Shuiming，et al． Design and calibration of reverberation chamber．Chinese Journal of Radio Science，2007，22(4)：571-576)

[10] IEC61000-4-21，Testing and measurement techniques reverberation chamber test methods［S］.2003．

[11] 王小平，曹立明．遗传算法理论、应用软件实现［M］．西安：西安交通大学出版社，2002．（Wang Xiaoping，Cao Liming．Genetic algorithm theory， application and software implementation．Xi’an：Xi’an Jiaotong University Press，2002）