[1] Al-Ibrahim M, Roth H K, Sensfuss S. Efficient large-area polymer solar cells on flexible substrates［J］. Appl. Phys. Lett., 2004, 85(9): 1481-1483.

[2] Lucio-López M A, Luna-Arias M A, Maldonado A, et al. Preparation of conducting and transparent indium-doped ZnO thin films by chemical spray［J］. Solar Energy Materials and Solar Cells, 2006, 90(60): 733-741.

[3] Park H W, Hui J N, Song P K, et al. Characteristics of NiO-AZO thin films deposited by magnetron co-sputtering in an O2 atmosphere［J］. Mater. Lett., 2012, 74: 30-32.

[4] Santiago K C, Mundle R, White C, et al. Infrared metamaterial by RF magnetron sputtered ZnO/Al∶ZnO multilayers［J］. Aip Advances, 2018, 8(3): 035011.

[5] 李 静. 柔性基底AZO薄膜制备及其红外发射率性能研究［J］. 材料工程, 2009(1): 293-297.Li Jing. Preparation and infrared emission properties of AZO film on soft substrate［J］. Mater. Engin., 2009(1): 293-297.

[6] Silva R F. Aluminium-doped zinc oxide films prepared by an inorganic route［J］. Thin Solid Films, 2009, 449: 86-93.

[7] Ghosh R, Paul G K, Basak D. Effect of thermal annealing treatment on structural, electrical and optical properties of transparent sol-gel ZnO thin films［J］. Mater. Research Bulletin, 2005, 40(11): 1905-1914.

[8] Tseng C H, Wang W H, Chang H C, et al. Effects of sputtering pressure and Al buffer layer thickness on properties of AZO films grown by RF magnetron sputtering［J］. Vacuum, 2010, 85(2): 263-267.

[9] Sonik B, Neha V, Munish A. Effect of deposition time on sputtered ZnO thin films and their gas sensing application［J］. J. of Materials Science: Materials in Electronics, 2018, 29: 18136-18143.

[10] 叶志镇, 陈汉鸿, 刘 榕, 等. 直流磁控溅射ZnO薄膜的结构和室温PL谱［J］. 半导体学报, 2001, 22(8): 1015-1018.Ye Zhizhen, Chen Hanhong, Liu Rong, et al. Structure and PL spectrum of ZnO films prepared by DC reactive magnetron sputtering［J］. J. of Semiconductors, 2001, 22(8): 1015-1018.

[11] Cada M, Lundin D, Hubicka Z. Measurement and modeling of plasma parameters in reactive high-power impulse magnetron sputtering of Ti in Ar/O2 mixtures［J］. J. of Appl. Phys., 2017, 121(17): 171913.

[12] 于 舸, 赵 曼. 氧氩比和退火温度对AZO薄膜结构与性能的影响［J］. 北京石油化工学院学报, 2017, 2(25): 1-5.Yu Ge, Zhao Man. Influence of the ratio of oxygen to argon and annealing temperature on the properties of Al-doped ZnO films［J］. J. of Beijing Institute of Petrochemical Technol., 2017, 2(25): 1-5.

[13] Doo S K, Ji H P, Su J L, et al. Effects of oxygen concentration on the properties of Al-doped ZnO transparent conductive films deposited by pulsed DC magnetron sputtering［J］. Materials Science in Semiconductor Proc., 2013, 16(3): 997-1001.

[14] Hao X T, Ma J, Zhang D H, et al. Comparison of the properties for ZnO∶Al films deposited on polyamide and glass substrates［J］. Mater. Science and Engin. B, 2002, 90(1/2): 50-54.

[15] Deok K K, Hong B K. Effect of post-annealing time on the properties of sputtered Al-doped ZnO thin films［J］. J. of Mater. Science: Materials in Electronics, 2016, 27(11): 11366-11370.

[16] 李 静, 郭米艳. 探究掺杂对ZnO薄膜禁带宽度的影响因素［J］. 江西化工, 2011(3): 4-7.Li Jing, Guo Miyan. Research on doping process to band gap of ZnO films［J］. Jiangxi Chemical Industry, 2011(3): 4-7.