[1] SUN Ruoduan, QIU Lirong, YANG Jiamiao, et al. Laser differential confocal radius measurement system［J］. Applied Optics, 2012,51(26): 6275.

[2] WANG Yun, QIU Lirong. Laser differential confocal lens thickness measurement［J］. Measurement Science and Technology, 2012,23(055204): 1-2.

[3] SCHMITZ T L,GARDNER N,VAUGHN M, et al. Improving optical bench radius measurements using stage error motion data［J］. Applied Optics,2008,47(36): 6692-6693.

[4] 徐鹏, 赵维谦, 王方彪, 等.光栅尺测长式激光差动共焦曲率半径测量系统［J］.应用光学, 2014,35(6): 1023-1024.

    XU Peng, ZHAO Weiqian, WANG Fangbiao, et al. Laser differential confocal curvature measurement system with grating length［J］. Journal of Applied Optics, 2014,35(6): 1023-1024.

[5] 顾志远, 颜昌翔, 胡春晖, 等.光学系统计算机辅助装调的坐标基准过渡方法［J］.光学学报, 2014, 34(3): 0322003-2.

    GU Zhiyuan, YAN Changxiang, HU Chunhui, et al. Coordinate datum transition method for optical system computer-aided alignment［J］. Acta Optica Sinica, 2014, 34(3): 0322003-2.

[6] 姜红.纳米级分辨力重载电控二维倾斜调整架设计［D］.长春: 长春理工大学,2012: 1-3.

    JIANG Hong.The structure design of nanometer rResolution overloading electronic two-dimension adjusting frame［D］.Changchun: Changchun University of Science and Technology,2012: 1-3.

[7] WANG Xu, QIU Lirong, ZHAO Weiqian, et al. Error analysis for a laser differential confocal radius measurement system［J］. Applied Optics, 2015, 54(5): 1081-1082.

[8] 王旭, 王中宇, 赵维谦,等.激光差动共焦曲率半径测量不确定度评定［J］.应用光学, 2014,35(1): 155-157.

    WANG Xu, WANG Zhongyu, ZHAO Weiqian, et al. Uncertainty evaluation in laser differential confocal radius-of-curvature measurement［J］. Journal of Applied Optics, 2014, 35(1): 155-157.

[9] 张建寰,周军现.测量表面倾角对差动共焦瞄准信号影响分析［J］.光学学报,2006, 26(9): 1365-1366.

    ZHANG Jianhuan, ZHOU Junxian. Effect of tilt angle of surface to be measured on differential confocal microscope pointing signal［J］. Acta Optica Sinica, 2006,26(9): 1365-1366.

[10] 章亚男,沈丽丽,沈卫星,等.大口径透镜姿态调整机构的支承分布设计［J］.光学精密工程,2010,18(12): 2626-2628.

    ZHANG Yanan, SHEN Lili, SHEN Weixing, et al. Design of support distribution for attitude-adjusting mechanism of large lens［J］. Optics and Precision Engineering, 2010,18(12): 2626-2628.

[11] 张丽敏,吴元昊.45°倾斜镜多自由度精调结构设计研究［J］.光子学报,2010,39(12): 2139-3140.

    ZHANG Limin, WU Yuanhao. Design of multiple DOF fine tuning mechanism for 45°tilting mirror［J］. Acta Photonica Sinica, 2010,39(12): 2139-3140.

[12] 罗勇.多维精密光学调整架坐标解耦合分析［J］.光电工程, 2011,38(4): 37-40.

    LUO Yong. Coordinates-decoupling of multidimensional precision optical aadjusting frame［J］.Opto-Electronic Engineering, 2011, 38(4): 37-40.

[13] 鱼胜利, 周建勋, 肖虹.大口径光学元件透反射检测调整工装的研制与分析［J］.工具技术, 2018,52(3): 136-137.

    YU Shengli, ZHOU Jianxun, XIAO Hong. Development and analysis of adjusting tool for transmission and reflectance detection of large aperture optical element［J］. Tool Engineering, 2018,52(3): 136-137.