激光模切加工新技术的实验研究

为了改进传统包装纸盒模切工艺，进行了激光模切的实验研究。详细介绍了激光模切的工作原理，对振镜扫描方式的聚焦误差进行了分析，在采用射频CO2激光器、hurrySCAN14扫描头和RTC3通用激光控制卡等构建的数控激光模切系统上，进行了激光模切技术的研究。与传统机械模切相比，激光模切在小批量样品的生产中具有方便、灵活、生产周期短和效率高等独特的优点。

Abstract

To improve the die-cutting process of the traditional packaging carton, experiments of laser die-cutting have been done. Details of the working principle of laser die-cutting were introdued, and scanning precision of the focusing was analyzed. A laser die-cutting system with galvanometer, radio frequency CO2 laser, hurrySCAN14 scan head, RTC3 card and so on is built, and laser die-cutting has been done with this system. Compared with traditional mechanical cutting, laser die-cutting has lots of advantages, such as convenience, agility, short production cycle and higher efficiency especially in the packaging of small quantities samples.

参考文献

[1] 张国顺. 现代激光制造技术［M］. 北京: 化学工业出版社, 2006. 116～123

Zhang Guoshun. Modern Laser Manufacturing Technology［M］. Beijing: Chemical industry press, 2006. 116～123

[2] 蒋明，蒋毅. 激光飞行标刻扫描幅面约束特性及最大飞行速度性能分析［J］ . 中国激光, 2009, 36（4）: 993～997

Jiang Ming, Jiang Yi. Analysis of scanning area limitation and maximum flying velocity in laser flying marking system［J］. Chinese J. Lasers, 2009, 36(4): 993～997

[3] 许宝忠，刘铁根，王萌等. 空间自由曲面激光标刻技术研究［J］. 中国激光， 2010, 37（8）: 2165～2169

Xu Baozhong, Liu Tiegen, Wang Meng et al.. Research on laser marking technology for free-form surface［J］. Chinese J. Lasers, 2010, 37(4): 2165～2169

[4] 洪申伟. 激光数字化蚀刻加工术-对传统模切术的挑战［J］. 印艺， 2003, (1): 24～25

Hong Shenwei. Digital etching technology with laser-a challenge for traditional die-cutting [J]. Graphic Arts, 2003, (1): 24～25

[5] 周浩. 包装纸盒（箱）与模切压痕技术［J］. 今日印刷, 2008, (11): 16～18

Zhou Hao. Packing carton (box) and the die-indentation technology［J］. Print today, 2008(11): 16～18

[6] G. Craig, J. Greg. Digital laser die cutting can open new opportunities［J］. Canadian Printer, 2006, 114(2): 10

[7] Davison Mike. Laser die-cutting inline or offline［J］. Folding Carton Industry, 2005, 32(1): 56～57

[8] 陈文革.表面整饰新技术-激光数字模切［J］. 今日印刷， 2006, （8）: 39～41

Chen Wenge. New technology for surface decoration-laser die-cutting［J］. Print today, 2006, (8): 39～41

[9] 王萌. 数控激光模切系统研究［D］. 天津: 天津大学， 2008. 6～8

Wang Meng. The Study of Numeral Control Laser Die-Cutting System［D］. Tianjin: Tianjin University, 2008. 6～8

[10] http: //www.spartanics.com

[11] http: //www.srpco.com/laser-die-cutting.html

[12] http: //www.lasx.com/print/commercial-print.htm

[13] 朱林全. 双振镜二维扫描系统的误差分析和校正技术［J］. 应用激光, 2001, 21(5): 325～327

Zhu Linquan. Error analysis and correcting method of the two vibrational mirrors scanning system［J］. Applied Laser, 2001, 21(5): 325～327

[14] 谢军，段正澄，史玉生. 用于SLS快速成形制造中振镜式激光扫描系统的关键技术［J］. 制造业自动化， 2004, 26（4）: 9～12

Xie Jun, Duan Zhengcheng, Shi Yusheng. Study of key technologies for galvanometric scanning system used in selective laser sintering［J］. Manufacturing Automation, 2004, 26（4）: 9～12

[15] 杨奎，王锡洁，孙丽媛等. 激光雕刻系统中矢量图形输出的研究［J］. 仪表技术, 2008,(11): 59～60

Yang Kui, Wang Xijie, Sun Liyuan et al.. Research on vector graphics output from laser engraving system［J］. Instrumentation Technology, 2008, (11): 59～60

许宝忠, 刘铁根, 王萌, 李梅, 张国顺. 激光模切加工新技术的实验研究[J]. 激光与光电子学进展, 2011, 48(5): 051403. Xu Baozhong, Liu Tiegen, Wang Meng, Li Mei, Zhang Guoshun. Experimental Study on New Technology of Laser Die-Cutting Processing[J]. Laser & Optoelectronics Progress, 2011, 48(5): 051403.

激光模切加工新技术的实验研究下载： 582次

关于本站 Cookie 的使用提示

全站搜索

激光模切加工新技术的实验研究 下载： 582次

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索

激光模切加工新技术的实验研究下载： 582次