[1] 官杰, 刘建荣, 雷家峰, 等. TC18钛合金的组织和性能与热处理制度的关系[J]. 材料研究学报, 2009, 23(1): 77-82.

    Guan J, Liu J R, Lei J F, et al. The relationship of heat treatment-microstructures-mechanical properties of the TC18 titanium alloy[J]. Chinese Journal of Materials Research, 2009, 23(1): 77-82.

[2] Ivasishin O M, Markovsky P E, Matviychuk Y V, et al. A comparative study of the mechanical properties of high-strength β-titanium alloys[J]. Journal of Alloys and Compounds, 2008, 457(1/2): 296-309.

[3] 沙爱学, 王庆如, 李兴无. 航空用高强度结构钛合金的研究及应用[J]. 稀有金属, 2004, 28(1): 239-242.

    Sha A X, Wang Q R, Li X W. Research and application of high-strength titanium alloys used in airplane structure[J]. Chinese Journal of Rare Metals, 2004, 28(1): 239-242.

[4] 曹春晓. 钛合金在大型运输机上的应用[J]. 稀有金属快报, 2006, 25(1): 17-21.

    Cao C X. Applications of titanium alloys on large transporter[J]. Rare Metals Letters, 2006, 25(1): 17-21.

[5] 王堃, 孟牧, 王华明. 热处理及激光多道搭接对激光熔化沉积TC18钛合金组织的影响[J]. 红外与激光工程, 2010, 39(3): 521-525.

    Wang K, Meng M, Wang H M. Effect of heat treatment and laser multi-track overlapping on microstructure of a laser melting deposition TC18 titanium alloy[J]. Infrared and Laser Engineering, 2010, 39(3): 521-525.

[6] 曲凤盛, 周杰, 刘旭光, 等. TC18钛合金热压缩本构方程及热加工图[J]. 稀有金属材料与工程, 2014, 43(1): 120-124.

    Qu F S, Zhou J, Liu X G, et al. Constitutive equation and processing map of thermal deformation for TC18 titanium alloy[J]. Rare Metal Materials and Engineering, 2014, 43(1): 120-124.

[7] Li C W, Xie H, Mao X N, et al. High temperature deformation of TC18 titanium alloy[J]. Rare Metal Materials and Engineering, 2017, 46(2): 326-332.

[8] 陈缇萦, 聂西安, 易丹青, 等. TC18钛合金高温变形行为与加工图[J]. 热加工工艺, 2012, 41(21): 24-28.

    Chen T Y, Nie X A, Yi D Q, et al. High temperature deformation behavior and processing map of TC18 titanium alloy[J]. Hot Working Technology, 2012, 41(21): 24-28.

[9] Jones N G, Dashwood R J, Dye D, et al. Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr[J]. Materials Science and Engineering A, 2008, 490(1/2): 369-377.

[10] 杨强, 鲁中良, 黄福享, 等. 激光增材制造技术的研究现状及发展趋势[J]. 航空制造技术, 2016( 12): 26- 31.

    YangQ, Lu ZL, Huang FX, et al. Research on status and development trend of laser additive manufacturing[J]. Aeronautical Manufacturing Technology, 2016( 12): 26- 31.

[11] 王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战[J]. 中国激光, 2009, 36(12): 3204-3209.

    Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209.

[12] 刘小欣, 程序, 王华明, 等. 不同工艺条件对激光熔化多道沉积DD5单晶高温合金杂晶的影响[J]. 中国激光, 2017, 44(6): 0602009.

    Liu X X, Cheng X, Wang H M, et al. Influence of processing conditions on formation of stray grains in DD5 single-crystal superalloys by laser melting multi-traced deposition[J]. Chinese Journal of Lasers, 2017, 44(6): 0602009.

[13] 刘正武, 程序, 李佳, 等. 激光增材制造05Cr15Ni5Cu4Nb沉淀硬化不锈钢的热处理工艺[J]. 中国激光, 2017, 44(6): 0602010.

    Liu Z W, Cheng X, Li J, et al. Heat-processing technology for laser additive manufacturing of 05Cr15Ni5Cu4Nb precipitation-hardening stainless steels[J]. Chinese Journal of Lasers, 2017, 44(6): 0602010.

[14] Liu C M, Tian X J, Tang H B, et al. Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy[J]. Journal of Alloys and Compounds, 2013, 572: 17-24.

[15] Donoghue J, Antonysamy A A, Martina F, et al. The effectiveness of combining rolling deformation with wire-arc additive manufacture on β-grain refinement and texture modification in Ti-6Al-4V[J]. Materials Characterization, 2016, 114: 103-114.

[16] Jackson M, Jones N G, Dye D, et al. Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al[J]. Materials Science and Engineering A, 2009, 501(1/2): 248-254.

[17] 李淼泉, 李宏, 罗皎. 钛合金精密锻造[M]. 北京: 科学出版社, 2016: 43- 53.

[18] Zhao J, Zhong J, Yan F, et al. Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al[J]. Journal of Alloys and Compounds, 2017, 710: 616-627.

[19] 李鑫. TC11钛合金的热态变形行为及其锻造工艺优化研究[D]. 南京: 南京航空航天大学, 2008: 29- 31.

    LiX. Research on hot deformation behavior and optimization of forging process of titanium alloy TC11[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008: 29- 31.

[20] Sellars C M, Mctegart W J. On mechanism of hot deformation[J]. Acta Metallurgica, 1966, 14(9): 1136-1138.

[21] Gegel H L, Doraivelu S M, et al. . Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242[J]. Metallurgical Transactions A, 1984, 15(10): 1883-1892.

[22] 祖利国. Ti-5Al-5Mo-5V-1Cr-1Fe近β钛合金的热变形行为及加工图研究[D]. 长沙: 中南大学, 2012: 38- 51.

    Zu LG. Hot deformation behavior and processing map of Ti-5Al-5Mo-5V-1Cr-1Fe alloy[D]. Changsha: Central South University, 2012: 38- 51.

[23] . Author's reply: Dynamic materials model: Basis and principles[J]. Metallurgical and Materials Transactions A, 1996, 27(1): 235-236.

[24] Sastry D H, Deevi S C. Processing maps for hot working of a P/M iron aluminide alloy[J]. Intermetallics, 2000, 8(9/10/11): 1067-1074.

[25] . Recent advances in the science of mechanical processing[J]. Indian Journal of Technology, 1990, 28(6/7/8): 435-451.

[26] 胡赓祥, 蔡珣, 戎咏华. 材料科学基础[M]. 上海: 上海交通大学出版社, 2010: 191- 216.

    Hu GX, CaiX, Rong YH. Fundamentals of materials science[M]. Shanghai: Shanghai Jiao Tong University Press, 2010: 191- 216.

[27] Chen H Q, Cao C X. Characterization of hot deformation microstructures of alpha-beta titanium alloy with equiaxed structure[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(3): 503-509.