激光熔覆单道沉积轨迹横截面形貌变化规律研究
[1] 张庆茂, 钟敏霖, 杨森 等. 送粉式激光熔覆层质量与工艺参数之间的关系 [J]. 焊接学报, 2001, 22(4): 51~55
Zhang Qingmao, Zhong Minlin, Yang Sen et al.. The relationship between the processing parameters and the qualities of the coatings formed by powder feeding laser cladding [J]. Transactions of the China Welding Institution, 2001, 22(4): 51~55
[2] 张庆茂, 王忠东, 刘喜明 等. 工艺参数对送粉激光熔覆层几何形貌的影响 [J]. 焊接学报, 2000, 21(2): 43~46
Zhang Qingmao, Wang Zhongdong, Liu Ximing et al.. Influence of processing parameters on geometrical features of powder feeding laser cladding [J]. Transactions of the China Welding, 2000, 21(2): 43~46
[3] J. Del Val, R. Comesaa, F. Lusquios et al.. Laser cladding of co-based superalloy coatings: comparative study between NdYAG laser and fibre laser [J]. Surface & Coatings Technology, 2010, 204(12-13): 1957~1961
[4] 王志坚, 董世运, 徐滨士 等. 单道激光熔覆层几何特征的三维表征方法 [J]. 中国激光, 2010, 37(2): 581~585
[5] 黄小伟, 习俊通, J. L. Lebrun 等. 工艺参数对激光熔覆成形316L不锈钢形状的影响规律 [J]. 激光与光电子学进展, 2011, 48(7): 071404
[6] 倪立斌, 刘继常, 伍耀庭 等. 基于神经网络和粒子群算法的激光熔覆工艺优化 [J]. 中国激光, 2011, 38(2): 0203003
[7] Shengfeng Zhou, Xiaoqin Dai, Haizhong Zheng. Analytical modeling and experimental investigation of laser induction hybrid rapid cladding for Ni-based WC composite coatings [J]. Optics & Laser Technology, 2011, 43(3): 613~621
[8] J. T. Hofman, D. F. de Lange, B. Pathiraj et al.. FEM modeling and experimental verification for dilution control in laser cladding [J]. J. Materials Processing Technology, 2011, 211(2): 187~196
[9] J. T. Hofman. Development of an Observation and Control System for Industrial Laser Cladding [D]. Enschede: University of Twente, 2009. 46~47
[10] Soundarapandian Santhanakrishnan, Fanrong Kong, Radovan Kovacevic. An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding [J]. J. Materials Processing Technology, 2011, 211(7): 1247~1259
[11] Yongjun Huang. Characterization of dilution action in laser-induction hybrid cladding [J]. Opt. & Laser Technol., 2011, 43(5): 965~973
[12] Hussam El Cheikh, Bruno Courant, Samuel Branchu et al.. Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process [J]. Opt. & Lasers in Engng., 2012, 50(3): 413~422
[13] C. Onwubolu, J. Paulo Davim, C. Oliveira et al.. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search [J]. Opt. & Laser Technol., 2007, 39(6): 1130~1134
高士友, 李健, 李臣光, 周野飞. 激光熔覆单道沉积轨迹横截面形貌变化规律研究[J]. 中国激光, 2013, 40(5): 0503010. Gao Shiyou, Li Jian, Li Chenguang, Zhou Yefei. Research on the Variation Regularity of Single Laser Tracks Cross-Section Morphology During Laser Cladding[J]. Chinese Journal of Lasers, 2013, 40(5): 0503010.