基于条纹反射术的槽式抛物面单元镜面形测量

针对太阳能热发电槽式抛物面聚光器单元镜面形测量的问题，采用条纹反射技术和时域相移解包裹技术相结合的方法，在三维轮廓测量系统模型的基础上，建立了一个结构简单、易操作的测量系统。在对系统设备无任何严格要求的前提下，利用投影仪向投影屏幕上投射正弦条纹，由相机拍摄记录单元镜反射产生的条纹，根据标定的系统参数及三维轮廓测量系统模型来计算单元镜表面面形。通过现场实验，获取了单元镜的面形分布情况，结论证明该测量方法的可行性。该测量系统的建立为以后的测量工作提供了一定的参考，并在太阳能热发电领域有很好的应用前景。

Abstract

A measurement system is established for the parabolic trough unit mirror in concentrating solar power (CSP). The system applies the fringe reflection technique and the temporal phase unwrapping technique. Based on three-dimensional profilometry system model, the measurement system has less equipments and simpler operation. Without any strict requirements to the system equipment, a sinusoidal fringe is projected with projector, and the images are recorded by a camera after reflected by the unit mirror. Then the surface is computed by the parameters of the system. Experimental results verify that the measurement method is reliable. The system is helpful to the measurement work, and has a very good application prospect in the solar thermal power field.

参考文献

[1] 罗智慧, 龙新峰. 槽式太阳能热发电技术研究现状与发展 [J]. 电力设备, 2006, 7(11): 29～32

Luo Zhihui, Long Xinfeng. State and trend of solar parabolic trough power generation technology [J]. Electrical Equipment, 2006, 7(11): 29～32

[2] 许文斌, 卢振武, 张红鑫等. 塔式太阳能热发电站定日镜面形检测专用仪器的研制 [J]. 仪器仪表学报, 2009, 30(7): 1390～1394

Xu Wenbin, Lu Zhenwu, Zhang Hongxin et al.. Development of the heliostat shape measuring apparatus of solar tower thermal power plant [J]. Chinese J. Scientific Instrument, 2009, 30(7): 1390～1394

[3] 盖绍彦, 达飞鹏. 一种新的相位法三维轮廓测量系统模型及其标定方法研究 [J]. 自动化学报, 2007, 33(9): 902～910

Gai Shaoyan, Da Feipeng. A new model of 3D shape measurement system based on phase measuring profilometry and its calibration [J]. Acta Automatica Sinica, 2007, 33(9): 902～910

[4] J. Y. Bouguet. Camera Calibration Toolbox for Matlab [OL]. http://www.vision.caltech.edu/bouguetj/calib_doc/.[2012-11-07]

[5] 李江城, 金观昌, 马少鹏. 应用时域相位解包方法的三维形貌测量系统 [J]. 清华大学学报（自然科学版）, 2004, 44(11): 1505～1508

Li Jiangcheng, Jin Guanchang, Ma Shaopeng. 3-D profilometry system using the temporal phase unwrapping method [J]. J. Tsinghua University (Science and Technology), 2004, 44(11): 1505～1508

[6] J. M. Huntley. Three-dimensional noise-immune phase unwrapping algorithm [J]. Appl. Opt., 2001, 40(23): 3901～3908

[7] R. Cusack, N. Papadakis. New robust 3-D phase unwrapping algorithms: application to magnetic field mapping and undistoring echoplanar images [J]. NeuroImage, 2002, 16(3): 754～764

[8] H. O. Saklner, J. M. Huntley. Profilometry using temporal phase unwrapping and a spatial light modulator-based fringe projector [J]. Opt. Engng., 1997, 36(2): 610～615

[9] 赵文川, 范斌, 伍凡等. 基于相位测量偏折术的非球面法线向量测量 [J]. 光学学报, 2011, 31(6): 0612007

Zhao Wenchuan, Fan Bin, Wu Fan et al.. Testing of aspheric surface normal vector based on phase measuring deflectometry [J]. Acta Optica Sinica, 2011, 31(6): 0612007

[10] 肖永亮, 苏显渝, 陈文静. 基于全局位姿评估的条纹反向视觉测量 [J]. 中国激光, 2011, 38(8): 0808003

Xiao Yongliang, Su Xianyu, Chen Wenjing. Fringe inverse videogrammetry based on global pose estimation [J]. Chinese J. Lasers, 2011, 38(8): 0808003

[11] 彭翔, 殷永凯, 刘晓利等. 基于相位辅助的三维数字成像与测量 [J]. 光学学报, 2011, 31(9): 0900120

Peng Xiang, Yin Yongkai, Liu Xiaoli et al.. Phase-aided three-dimensional imaging and metrology [J]. Acta Optica Sinica, 2011, 31(9): 0900120

王华荣, 李彬, 王志峰, 朱会宾. 基于条纹反射术的槽式抛物面单元镜面形测量[J]. 光学学报, 2013, 33(1): 0112007. Wang Huarong, Li Bin, Wang Zhifeng, Zhu Huibin. Surface Measurement of Parabolic Trough Unit Mirror Based on Fringe Reflection[J]. Acta Optica Sinica, 2013, 33(1): 0112007.

基于条纹反射术的槽式抛物面单元镜面形测量

关于本站 Cookie 的使用提示

全站搜索

基于条纹反射术的槽式抛物面单元镜面形测量

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索