[1] 王琼华, 王爱红．三维立体显示综述[J]．计算机应用, 2010, 30(3): 579-581, 588．

    WANG Q H, WANG A H. Survey on stereoscopic three-dimensional display[J]. Journal of Computer Applications, 2010, 30(3): 579-581, 588. (in Chinese)

[2] 温才, 唐丽红, 赖永宽, 等．晶格结构三维模型“LED光立方”的设计与制作[J]．大学物理实验, 2014, 27(4): 52-56．

    WEN C, TANG L H, LAI Y K, et al. Design and preparation of LED light cubic model for showing three dimentional crystal lattice[J]. Physical Experiment of College, 2014, 27(4): 52-56. (in Chinese)

[3] 陈晓西, 李光勇, 王继岷, 等．基于液晶多层屏的3D显示系统和算法设计[J]．液晶与显示, 2017, 32(4): 302-307．

    CHEN X X, LI G Y, WANG J M, et al. Liquid crystal multi-layer 3D display system and algorithm design[J]. Chinese Journal of Liquid Crystals and Displays, 2017, 32(4): 302-307. (in Chinese)

[4] LI X, CHEN C P, GAO H Y, et al. Video-rate holographic display using Azo-dye-doped liquid crystal[J]. Journal of Display Technology, 2014, 10(6): 438-443.

[5] 邓立．基于辅助教学的μC/OS-Ⅱ光立方三维控制设计[J]．数字技术与应用, 2014(9): 12．

    DENG L. 3D control design of μC/OS-Ⅱ LED cube based on assistant teaching[J]. Digital Technology and Application, 2014(9): 12. (in Chinese)

[6] 贾高杰, 邱崧, 蔡茗名, 等．三维点云重构和体显示在医学辅助诊断中的应用[J]．中国医学物理学杂志, 2016, 33(6): 593-598, 618．

    JIA G J, QIU S, CAI M M, et al. Application of three-dimensional point cloud reconstruction and swept volume display in medical assistant diagnosis[J]. Chinese Journal of Medical Physics, 2016, 33(6): 593-598, 618. (in Chinese)

[7] 陈琳, 李洁．基于虚拟现实技术的三维影像智能显示系统嵌入式设计[J]．现代电子技术, 2017, 40(8): 100-102, 106．

    CHEN L, LI J. Design of 3D image embedded intelligent display system based on virtual reality technology[J]. Modern Electronics Technique, 2017, 40(8): 100-102, 106. (in Chinese)

[8] 谭泽洋．吸顶灯(光立方): 中国, CN305532511S[P]．2020-01-03．

    TAN Z Y. Lamp affixed to ceiling (light cube): CN, CN305532511S[P]. 2020-01-03. (in Chinese)

[9] 肖展超．3D动画效果展示柜(光立方): 中国, CN305281396S[P]．2019-07-30．

    XIAO Z C. 3D Animation effect show cabinet (light cube): CN, CN305281396S[P]. 2019-07-30. (in Chinese)

[10] 唐康, 刘耀联, 韩帅, 等．基于STM32的3D16光立方设计[J]．电子技术与软件工程, 2015(23): 119-120．

    TANG K, LIU Y L, HAN S, et al. Design of 3D16-LED cube based on STM32[J]. Electronic Technology & Software Engineering, 2015(23): 119-120. (in Chinese)

[11] 康志强, 汪佳, 汤勇明．基于FPGA的3D光立方设计[J]．电子器件, 2012, 35(6): 683-686．

    KANG Z Q, WANG J, TANG Y M. Design of LED cube based on FPGA[J]. Chinese Journal of Electron Devices, 2012, 35(6): 683-686. (in Chinese)

[12] KOV K. The use of 3D LED cube for basic programming teaching[J]. IFAC-PapersOnLine, 2016, 49(6): 203-206.

[13] 朱清慧, 张凤蕊．基于Proteus的虚拟液晶触摸屏设计与应用[J]．液晶与显示, 2009, 24(4): 562-566．

    ZHU Q H, ZHANG F R. Design and application of virtual liquid touch panel based on Proteus[J]. Chinese Journal of Liquid Crystals and Displays, 2009, 24(4): 562-566. (in Chinese)

[14] 周灵彬, 张靖武．创建Proteus动态器件仿真模型的技术[J]．现代电子技术, 2009, 32(12): 152-155．

    ZHOU L B, ZHANG J W. Technology of dynamic simulation model for Proteus[J]. Modern Electronics Technique, 2009, 32(12): 152-155. (in Chinese)

[15] 韩鲁佳, 李松维．投影变换的原理及其应用浅析[J]．科技视界, 2015(26): 171-174．

    HAN L J, LI S W. The principle and application elementary analysis of projection transformation[J]. Science & Technology Vision, 2015(26): 171-174. (in Chinese)

[16] 王超, 宋莉莉．Proteus仿真图表在单片机时序分析中的应用[J]．实验室研究与探索, 2014, 33(9): 93-97．

    WANG C, SONG L L. Application of Proteus simulation diagram in MCU timing analysis[J]. Research and Exploration in Laboratory, 2014, 33(9): 93-97. (in Chinese)