高压大电流SF6激光触发开关中透镜的污染

陆泽; 高智星; 胡凤明

doi:doi:10.11884/hplpb201628.015011

强激光与粒子束, 2016, 28 (1): 015011, 网络出版: 2016-03-22

高压大电流SF6激光触发开关中透镜的污染

Pollution of lens in high pressure SF6 gas for high-voltage, high-current, laser triggered switch

论文大纲

陆泽 ^*高智星胡凤明

作者单位

中国原子能科学研究院, 北京 102413

激光触发开关焦点透镜腐蚀寿命 laser triggered switch focal point optical lens etch lifetime

摘要

研究了高压大电流SF6激光触发开关在使用过程中透镜污染的问题,通过对激光触发开关中被污染透镜透过率的测量、透镜表面附着物的分析和透镜使用寿命的数据积累,总结出氟化氢的腐蚀和开关粉尘附着是造成激光开关透镜透过率降低、以致失效的主要原因。通过三种激光触发开关结构参数分析和开关运行数据的比较,认为采用氟化钙透镜、低吸水性绝缘材料、选择轴向绝缘V/N型辅助间隙多电极开关结构、铜钨合金电极、脱水处理等措施,可以降低氟化氢和粉尘的产额,从而增加开关的工作寿命。

Abstract

The surface damage of the lens in high voltage,high current laser triggered gas switch is analyzed, based on the measurements of optical transmission, the analysis of the mist material on the lens surface and the statistic of exposure time. Both the corrosion and the debris/dust deposition on the lens surface have some effect on the optical transmission, which leads to the failure. From the comparison of three different structure laser triggered switches and the statistics of their operation data, it is concluded that both HF and debris/dust can be greatly eliminated by using the CaF2 lens, low water imbibitions insulation materials, and tungsten-copper electrode. The operation time of the switch can be prolonged with dehydration processing of the components. The axial insulated V/N type assistant multilevel gap switch has the longest operation life.

参考文献

[1] Maenchen J, Hermann G, Van Den Avyle J A, et al. Fundamental science investigations to develop a 6-MV laser triggered gas switch for ZR［R］. AC04-94AL85000,2007.

[2] 马维义,马景龙,胡凤明,等. 电子束激励KrF激光放大器稳定运行的重要技术问题［J］.强激光与粒子束, 2002, 14(5): 723-726. (Ma Weiyi, Ma Jinglong, Hu Fengming, et al. Important technological problems with stable operation of electron beam pumped KrF excimer laser amplifier. High Power Laser and Particle Beams, 2002, 14(5): 723-726)

[3] 王川,陆泽,王建中,等. 圆柱电极激光触发开关击穿前的模拟计算［J］.强激光与粒子束, 2010, 22(4): 901-904. (Wang Chuan, Lu Ze, Wang Jianzhong, et al. Simulation of laser triggered gas switch with cylindrical electrodes on pre-breakdown stage. High Power Laser and Particle Beams, 2010, 22(4): 901-904)

[4] 薛春荣,易葵,魏朝阳,等. 真空紫外到深紫外波段基底材料的光学特性［J］.强激光与粒子束, 2009, 21(2): 287-290. (Xue Chunrong, Yi Kui, Wei Chaoyang, et al. Optical properties of vacuum ultraviolet and deep ultraviolet region substrate materials. High Power Laser and Particle Beams, 2009, 21(2): 287-290)

[5] Sullivan D L, Gahl J M, Kovaleski S D, et al. Study of laser target triggering for spark gap switches［J］.IEEE Trans Dielectr Insul,2009,16(4):956-960.

[6] Hegeler F, Myers M C, Wolford M F, et al. Low jitter, high voltage, repetitive laser triggered gas switches［J］. IEEE Trans Dielectr Insul, 2013,20(4):1168-1188.

[7] 刘锡三.高功率脉冲技术［M］.北京: 国防工业出版社,2007: 324.(Liu Xisan. High pulse power technology. Beijing: National Defense Industry Press, 2007:324)

[8] LeChien K, Savage M, Bliss D, et al. Zr laser triggered gas switch requirements and performance［C］//16th IEEE International Pulsed Power Conference. 2007, 1:245-249.

[9] 谢昌明,谈效华,杜涛,等. 气体火花开关电极烧蚀研究［J］.强激光与粒子束, 2014, 26: 015003.(Xie Changming, Tan Xiaohua, Du Tao, et al. Electrode erosion research of gas spark gap. High Power Laser and Particle Beams,2014, 26: 015003)

[10] Wakeland P E, Corley J P, Hodge K C, et al. Material testing on high voltage laser triggered gas switches for ZR［C］//16th IEEE International Pulsed Power Conference. 2007, 1:428-431.

[11] 李晓昂,刘轩东,曾凡辉,等. 电极熔蚀导致的气体开关绝缘子性能劣化［J］.强激光与粒子束, 2014, 26: 085004. (Li Xiaoang, Liu Xuandong, Zeng Fanhui, et al. Degradation of gas switch insulator due to electrode erosion. High Power Laser and Particle Beams, 2014, 26: 085004)

陆泽, 高智星, 胡凤明. 高压大电流SF6激光触发开关中透镜的污染[J]. 强激光与粒子束, 2016, 28(1): 015011. Lu Ze, Gao Zhixing, Hu Fengming. Pollution of lens in high pressure SF6 gas for high-voltage, high-current, laser triggered switch[J]. High Power Laser and Particle Beams, 2016, 28(1): 015011.

高压大电流SF6激光触发开关中透镜的污染

关于本站 Cookie 的使用提示

全站搜索

高压大电流SF6激光触发开关中透镜的污染

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索