[1] Haferkamp H, Meier O, Harley K. Laser beam welding of new high strength steels for auto body construction[J]. Key Engineering Materials, 2007, 344: 723-730.

[2] 张东胜. 我国新能源产业发展现状及展望[J]. 经济与管理战略研究, 2012( 1): 67- 77.

    Zhang DS. The development status and prospect of China's new energy industry[J]. Economics & Management Strategies Journal, 2012( 1): 67- 77.

[3] 李翔, 唐建国, 张新明, 等. 温变形对汽车车身用6061铝合金自然时效及力学性能的影响[J]. 中国有色金属学报, 2016, 26(1): 1-6.

    Li X, Tang J G, Zhang X M, et al. Effect of temperature deformation on the natural aging and mechanical properties of automotive body 6061 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2016, 26(1): 1-6.

[4] 杨瑾, 张华, 李玉龙. 铝/钢异种材料激光焊接现状与展望[J]. 应用激光, 2013, 33(5): 555-562.

    Yang J, Zhang H, Li Y L. A study on problems of laser welding of aluminum and steel dissimilar materials[J]. Applied Laser, 2013, 33(5): 555-562.

[5] Ozaki H, Kutsuna M, Nakagawa S, et al. Laser roll welding of dissimilar metal joint of zinc coated steel to aluminum alloy[J]. Journal of Laser Applications, 2010, 22(1): 1-6.

[6] Meco S, Ganguly S, Williams S, et al. Effect of laser processing parameters on the formation of intermetallic compounds in Fe-Al dissimilar welding[J]. Journal of Materials Engineering and Performance, 2014, 23(9): 3361-3370.

[7] Peyre P, Sierra G, Deschaux-Beaume F, et al. Generation of aluminium-steel joints with laser-induced reactive wetting[J]. Materials Science and Engineering A, 2007, 444(1/2): 327-338.

[8] Mathieu A, Shabadi R, Deschamps A, et al. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)[J]. Optics & Laser Technology, 2007, 39(3): 652-661.

[9] Dharmendra C, Rao K P, Wilden J, et al. Study on laser welding-brazing of zinc coated steel to aluminum alloy with a zinc based filler[J]. Materials Science and Engineering: A, 2011, 528(3): 1497-1503.

[10] Yang J, Yu Z S, Li Y L, et al. Influence of alloy elements on microstructure and mechanical properties of Al/steel dissimilar joint by laser welding/brazing[J]. Welding in the World, 2018, 62(2): 427-433.

[11] Zhou D W, Xu S H, Zhang L J, et al. Microstructure, mechanical properties, and electronic simulations of steel/aluminum alloy joint during deep penetration laser welding[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(1/2/3/4): 377-387.

[12] Zhou D W, Xu S H, Peng L, et al. Laser lap welding quality of steel/aluminum dissimilar metal joint and its electronic simulations[J]. The International Journal of Advanced Manufacturing Technology, 2016, 86(5/6/7/8): 2231-2242.

[13] 陈树海, 黄继华, 杨冬冬, 等. 镍箔中间层对不锈钢/铝合金激光深熔焊的影响[J]. 焊接学报, 2012, 33(8): 9-12.

    Chen S H, Huang J H, Yang D D, et al. Influence of Ni-foil interlayer on laser penetration welding of stainless steel to aluminium alloy[J]. Transactions of the China Welding Institution, 2012, 33(8): 9-12.

[14] Chen S H, Huang J H, Ma K, et al. Influence of a Ni-foil interlayer on Fe/Al dissimilar joint by laser penetration welding[J]. Materials Letters, 2012, 79(23): 296-299.

[15] Tseng C C, Shen Y, Thompson S W, et al. Fracture and the formation of sigma phase, M23C6, and austenite from delta-ferrite in an AlSl 304L stainless steel[J]. Metallurgical and Materials Transactions A, 1994, 25(6): 1147-1158.

[16] Wang X N, Chen X M, Sun Q, et al. Formation mechanism of δ-ferrite and metallurgy reaction in molten pool during press-hardened steel laser welding[J]. Materials Letters, 2017, 206: 143-145.

[17] Zhang Z, Farrar R A. Influence of Mn and Ni on the microstructure and toughness of C-Mn-Ni weld metals[J]. Welding Journal, 1997, 76(5): 183s-196s.

[18] Kang B Y, Kim H J, Hwang S K. Effect of Mn and Ni on the variation of the microstructure and mechanical properties of low-carbon weld metals[J]. Transactions of the Iron & Steel Institute of Japan, 2000, 40(12): 1237-1245.

[19] Bohemen S M C, Sietsma J. Martensite formation in partially and fully austenitic plain carbon steels[J]. Metallurgical and Materials Transactions A, 2009, 40(5): 1059-1068.

[20] Campbell C E, Kattner U R. A thermodynamic assessment of the Ni-Al-B system[J]. Journal of Phase Equilibria, 1999, 20(5): 485-496.

[21] Saha DC, BiroE, Gerlich AP, et al. Fiber laser welding of Al-Si-coated press-hardened steel[J]. Welding Journal, 2016, 95(5): 147-s-156-s.

[22] 郭鹏飞, 王晓南, 朱国辉, 等. X100管线钢光纤激光焊接头的显微组织及性能[J]. 中国激光, 2017, 44(12): 1202003.

    Guo P F, Wang X N, Zhu G H, et al. Microstructures and properties of X100 pipeline steel joints by fiber laser welding[J]. Chinese Journal of Lasers, 2017, 44(12): 1202003.

[23] 郭建亭, 袁超, 侯介山. 稀土元素在NiAl合金中的作用[J]. 金属学报, 2008, 44(5): 513-520.

    Guo J T, Yuan C, Hou J S. Effect of rare earth elements on NiA1-based alloys[J]. Acta Metallurgica Sinica, 2008, 44(5): 513-520.

[24] 王中晓. SiC颗粒增强LD2复合材料的真空扩散焊[D]. 济南: 山东大学, 2008.

    Wang ZX. Vacuum diffusion bonding of SiC paniculate reinforced LD2 matrix composite[D]. Jinan: Shandong University, 2008.