发光学报, 2016, 37 (9): 1159, 网络出版: 2016-11-23  

纳米银焊膏烧结大功率LED模块的高温可靠性研究

High Temperature Reliability of High-power LED Module Using Die Attach Material of Nano-silver Paste
作者单位
1 天津大学 材料科学与工程学院, 天津 300072
2 弗吉尼亚理工大学 材料科学与工程学院, 弗吉尼亚州 蒙哥马利 24060
引用该论文

陈佳, 李欣, 孔亚飞, 梅云辉, 陆国权. 纳米银焊膏烧结大功率LED模块的高温可靠性研究[J]. 发光学报, 2016, 37(9): 1159.

CHEN Jia, LI Xin, KONG Ya-fei, MEI Yun-hui, LU Guo-quan. High Temperature Reliability of High-power LED Module Using Die Attach Material of Nano-silver Paste[J]. Chinese Journal of Luminescence, 2016, 37(9): 1159.

参考文献

[1] 王加文,苏宙平,袁志军,等. LED阵列模组化中的照度均匀性问题[J]. 光子学报, 2014, 43(8):0822004.

    WANG J W, SU Z P, YUAN Z J, et al.. Study on uniformity of LED array illumination distribution on target plane[J]. Acta Photon. Sinica, 2014, 43(8):0822004. (in Chinese)

[2] 裘燕青,张刘刘,陈苗根,等. 板上芯片集成封装发光二极管的光色检测系统[J]. 光学 精密工程, 2016, 24(1): 39-44.

    QIU Y Q, ZHANG L L, CHEN M G, et al.. Photoelectric parameter measurement system for chip-on-board wafer level packaging LEDs[J]. Opt. Precision Eng., 2016, 24(1): 39-44. (in Chinese)

[3] 宁磊,史永盛,史耀华,等. LED封装结构对出光率的影响[J]. 液晶与显示, 2010, 25(6):822-825.

    NING L, SHI Y S, SHI Y H, et al.. Influence of package structure on LED light extraction[J]. Chin. J. Liq. Cryst. Disp., 2010, 25(6):822-825. (in Chinese)

[4] 白一鸣,罗毅,韩彦军,等. 集成封装发光二极管光提取效率的计算及优化[J]. 光学 精密工程, 2014, 22(5): 1129-1137.

    BAI Y M, LUO Y, HAN Y J, et al.. Calculation and optimization of light extraction efficiency for integrated LED[J]. Opt. Precision Eng., 2014, 22(5):1129-1137. (in Chinese)

[5] 董丽,刘华,王尧,等. 紧凑型LED配光设计中光源模型可靠性研究[J]. 光子学报, 2014, 43(2):0222003.

    DONG L, LIU H, WANG Y, et al.. Reliability of light source modeling for distribution design on compact LED[J]. Acta Photon. Sinica, 2014, 43(2):0222003. (in Chinese)

[6] PENG S P, WU W H, HO C E, et al.. Comparative study between Sn37Pb and Sn3Ag0.5Cu soldering with Au/Pd/Ni(P) tri-layer structure[J]. J. Alloys Compd., 2010, 493(1-2):431-437.

[7] ZHANG Z Y. Processing and characterization of micro-scale and nanoscale silver paste for power semiconductor device attachment[J]. Mater. Sci. Eng., 2005:A484-469.

[8] KING D B, THOME F V. Sessions X & XI transaction[C]. International High Temperature Electronic Conference, Strasbourg, France, 1994:X-1-XI-28.

[9] BAI J G, ZHANGZ Z, CALATA J N, et al.. Low-temperature sintered nanoscale silver as a novel semiconductor device-metallized substrate interconnect material[J]. IEEE Trans. Comp. Pack. Technol., 2006, 29(3):589-593.

[10] NARENDRAN N, GU Y, FREYSSINIER J P, et al.. Solid-state lighting: failure analysis of white LEDs[J]. J. Cryst. Growth, 2004, 268(3-4):449-456.

[11] MARSEGUERRA M, ZIO E, CIPOLLONE M.Designing optimal degradation tests via multi-objective genetic algorithms[J]. Reliab. Eng. Syst. Saf., 2003, 79(1):87-94.

[12] ESCOBAR L A, MEEKER W Q. A review of accelerated test models[J]. Stat. Sci., 2006, 21(4):552-577.

[13] YUAN X X, PANDEY M D. A nonlinear mixed-effects model for degradation data obtained from in-service inspections[J]. Reliab. Eng. Syst. Saf., 2009, 94(2):509-519.

[14] MOHAMMADIAN S H, AT-KADI D, ROUTHIER F. Quantitative accelerated degradation testing: practical approaches[J]. Reliab. Eng. Syst. Saf., 2010, 95(2):149-159.

[15] CHANG M H, DAS D, VARDE P V, et al.. Light emitting diodes reliability review[J]. Microelectron. Reliab., 2012, 52(5):762-782.

[16] 肖友鹏,莫春兰,邱冲,等. Si衬底GaN基蓝光LED老化性能[J]. 发光学报, 2010, 31(3):364-368.

    XIAO Y P, MO C L, QIU C, et al.. The aging characteristics of GaN-based blue LED on Si substrate[J]. Chin. J. Lumin., 2010, 31(3):364-368. (in Chinese)

[17] 陈志忠,秦志新,胡晓东,等. 大功率白光LED的制备和表征[J]. 液晶与显示, 2004, 19(2):83-86.

    CHEN Z Z, QIN Z X, HU X D, et al. Fabrication and characterization of high-power white LED[J]. Chin. J. Liq. Cryst. Disp., 2004, 19(2):83-86. (in Chinese)

[18] 余菲, 金雷. GaN发光二极管的老化数学模型及寿命测试方法[J]. 中国激光, 2011, 38(8):0806001-1-4.

    YU F, JIN L. Mathematical model of aging and the life test method for GaN LED[J]. Chin. J. Lasers, 2011, 38(8):0806001-1-4. (in Chinese)

[19] ZHOU J M, YAN W. Experimental investigation on the performance characteristics of white LEDs used in illumination application[C]. Proceedings of The 2007 IEEE Power Electronics Specialists Conference, Orlando, USA, 2007:1436-1440.

[20] STREUBEL K, LINDER N, WIRTH R, et al.. High brightness AlGaInP light-emitting diodes[J]. IEEE J. Select. Top. Quant. Electron., 2002, 8(2):321-332.

[21] GRILLOT P N, KRAMES M R, ZHAO H M, et al.. Sixty thousand hour light output reliability of AlGaInP light emitting diodes[J]. IEEE Trans. Dev. Mater. Reliab., 2006, 6(4):564-574.

[22] MENEGHINI M, TREVISANELLO L, SANNA C, et al.. High temperature electro-optical degradation of InGaN/GaN HBLEDs[J]. Microelectron. Reliab., 2007, 47(9-11):1625-1629.

[23] ISHIZAKI S, KIMURA H, SUGIMOTO M. Lifetime estimation of high power white LEDs[J]. J. Light Vis. Environ., 2007, 31(1):11-18.

[24] TREVISANELLO L, MENEGHINI M, MURA G, et al.. Accelerated life test of high brightness light emitting diodes[J]. IEEE Trans. Dev. Mater. Reliab., 2008, 8(2):304-311.

[25] 周青超,柏泽龙,鲁路,等. 白光LED远程荧光粉技术研究进展与展望[J]. 中国光学, 2015, 8(3):313-328.

    ZHOU Q C, BAI Z L, LU L, et al.. Remote phosphor technology for white LED applications: advances and prospects[J]. Chin. Opt., 2015, 8(3):313-328. (in Chinese)

陈佳, 李欣, 孔亚飞, 梅云辉, 陆国权. 纳米银焊膏烧结大功率LED模块的高温可靠性研究[J]. 发光学报, 2016, 37(9): 1159. CHEN Jia, LI Xin, KONG Ya-fei, MEI Yun-hui, LU Guo-quan. High Temperature Reliability of High-power LED Module Using Die Attach Material of Nano-silver Paste[J]. Chinese Journal of Luminescence, 2016, 37(9): 1159.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!