深孔内表面结构光三维重构

为实现针对深孔内表面几何形状的高精度三维重构, 搭建了一套基于结构光的三维检测系统。首先, 介绍了该检测系统的构成及相关测量原理, 并验证了在某一确定范围内图像距离与实际距离近似呈线性关系, 该论断为后续检测奠定了坚实的理论基础; 然后, 针对深孔模型实物以及对应的内表面展开成平面模型分别进行结构光检测, 从而验证了检测方案的可行性以及检测系统的实际效果。结果表明: 该检测方案在理论上可行, 在实际应用中系统的检测精度能够达到亚像素水平, 绝对偏差控制在0.034 7 mm的范围内; 最后, 在实际应用于深孔类零部件内表面检测的过程中, 实现了针对该零部件内表面几何形状的高精度三维重构。

Abstract

In order to realize the high precision 3D reconstruction for deep-hole inner surface geometry, a 3D measurement system was built based on the structured light. First, the constitution and relevant measurement principle of the system were introduced, the assertion was proved that the distance between the image and the actual was approximately linear in a given range. The assertion lays a solid theoretical foundation for the following measurement. Then, the deep-hole model object and the model in which the corresponding inner surface was unfolded into a plane which were measured using the structured light. The measurement proves the feasibility of the measurement scheme and the actual effect of the measurement system. The measurement results show that the measurement scheme is feasible in theory, the measurement accuracy of the system can reach sub-pixel in practical applications and the absolute deviation is controlled within 0.034 7 mm range. Finally, in the actual measurement of the inner surface of the deep-hole parts inner surface, the high precision 3D reconstruction for deep-hole inner surface geometry was realized.

参考文献

[1] Ding Zhenglong, Xu Yuetong, Fu Jianzhong. On-line precise measurement principle and system for deep-hole diameter [J]. Journal of Xi′an Jiaotong University, 2015, 49(1): 65-71. (in Chinese)

[2] Leng Huiwen, Xu Chunguang, Xiao Dingguo, et al. A method for measuring complicated deep-hole profile using line-structured-light sensor [J]. Transactions of Beijing Institute of Technology, 2013, 33(2): 139-143. (in Chinese)

[3] Xu Jing, Xi Ning, Zhang Chi, et al. Real-time 3D shape inspection system of automotive parts based on structured light pattern [J]. Optics & Laser Technology, 2011, 43(1): 1-8. (in Chinese)

[4] Zhang Weiguang, Zhao Hong. Error correction method for three dimensional measurement system with multi-sensor and linear structure light [J]. Journal of Xi′an Jiaotong University, 2011, 45(6): 75-80. (in Chinese)

[5] Barone S, Paoli A, Razionale A V. Shape measurement by a multi-view methodology based on the remote tracking of a 3D optical scanner [J]. Optics and Lasers in Engineering, 2012, 50(3): 380-390.

[6] Li Wei, Sha Aimin, Sun Chaoyun, et al. Joint faulting three-dimension detection method on cement concrete pavement with line-structure light [J]. Journal of Tongji University Natural Science, 2015, 43(7): 1039-1044. (in Chinese)

[7] Wang Ying, Zhang Rui. In-pipe surface circular structured light 3D vision inspection system [J]. Infrared and Laser Engineering, 2014, 43(3): 891-896. (in Chinese)

[8] Leng Huiwen, Xu Chunguang, Xiao Dingguo, et al. A method for measuring complicated deep-hole profile using line-structured-light sensor [J]. Transactions of Beijing Institute of Technology, 2013, 33(2): 139-143. (in Chinese)

[9] Zhang Jinmin. The measurement system of objects′ three-dimension figure based on the laser triangulation [D]. Wuhan: Wuhan University of Technology, 2015. (in Chinese)

[10] Long Xulin. Research on gun barrel bore detecting system based on laser displacement sensor [D]. Nanjing: Nanjing University, 2015. (in Chinese)

[11] Ding Chao, Tang Liwei, Cao Lijun, et al. The measurement test of the barrel rifling based on the structured light [J]. Optics and Precision Engineering, 2017, 25(4): 1077-1085. (in Chinese)

丁超, 唐力伟, 曹立军, 邵新杰, 邓士杰. 深孔内表面结构光三维重构[J]. 红外与激光工程, 2018, 47(11): 1117004. Ding Chao, Tang Liwei, Cao Lijun, Shao Xinjie, Deng Shijie. 3D reconstruction of deep-hole inner surface using structured light[J]. Infrared and Laser Engineering, 2018, 47(11): 1117004.

深孔内表面结构光三维重构

关于本站 Cookie 的使用提示

全站搜索

深孔内表面结构光三维重构

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索