[1] 刘旭.纳米晶304不锈钢力学性能的研究［D］.沈阳: 东北大学, 2013.

    LIU XU.Study on mechanical properties of nanocrystalline 304 stainless steel［D］.Shenyang: Northeastern University, 2013.

[2] 仇卫华, 刘长毅.基于ANSYS的激光熔覆的数值模拟［J］.机械制造与自动化, 2008(1): 13-15.

    QIU WEIHUA, LIU CHANGYI.Numerical simulation of laser cladding based on ANSYS ［J］.Mechanical Manufacturing and Automation, 2008(1): 13-15.

[3] 徐鹏, 董梁, 鞠恒, 等.激光熔覆304不锈钢涂层的组织及耐蚀性［J］.材料热处理学报, 2014, 35(S1): 221-225.

    XU PENG, DONG LIANG, JU HENG, et al.Microstructure and corrosion resistance of 304 stainless steel coating by laser cladding［J］.Transactions of Materials and Heat Treatment, 2014, 35(S1): 221-225.

[4] 王围, 陈恽, 邹元平, 等.不锈钢熔覆技术再制造修复液压油缸杆件的探讨［J］.现代制造技术与装备, 2013(50): 46+52.

    WANG WEI, CHEN YUN, ZOU YUANPING, et al.Stainless steel cladding technology and manufacturing repair hydraulic oil cylinder rods discussion［J］.Modern Manufacturing Technology and Equipment, 2013(50): 46+52.

[5] 柴蓉霞, 李凯凯, 郭卫, 等.热处理工艺对304不锈钢熔覆层组织和性能的影响［J］.激光与光电子学进展, 2018, 55(5): 279-285.

    CHAI RONGXIA, LI KAIKAI, GUOWEI, et al.Effects of heat treatment on the structure and properties of 304 stainless steel cladding［J］.Laser & Optoelectronics Progress, 2018, 55(5): 279-285.

[6] 高美娜, 王续跃, 徐文骥, 等.不锈钢-碳钢层合板激光熔覆制备方法试验研究［J］.激光与光电子学进展, 2014, 51(2): 120-127.

    GAO MEINA, WANG XUYUE, XU WENJI, et al.Experimental study on the preparation of laser cladding for stainless steel-carbon steel laminates［J］.Laser & Optoelectronics Progress, 2014, 51(2): 120-127.

[7] 昝少平, 焦俊科, 张文武.316L不锈钢粉末激光熔覆工艺研究［J］.激光与光电子学进展, 2016, 53(6): 223-230.

    ZAN SHAOPING, JIAO JUNKE, ZHANG WENWU.Study on laser cladding process of 316L stainless steel powder［J］.Laser & Optoelectronics Progress, 2016, 53(6): 223-230.

[8] 陈列, 谢沛霖.双向扫描激光熔覆止裂机理及试验分析［J］.焊接学报, 2011, 32(2): 65-68.

    CHEN LIE, XIE PEILIN.Bidirectional scanning laser cladding crack arrest mechanism and experimental analysis［J］.Transactions of The China Welding Institution, 2011, 32(2): 65-68.

[9] 欧阳智勇, 卢国杰, 郭亮, 等.激光焊接温度场模拟分析及熔池深度的计算［J］.应用激光, 2018, 38(1): 52-57.

    OUYANG ZHIYONG, LUGUOJIE, GUOLIANG, et al.Simulation analysis of laser welding temperature field and calculation of molten pool depth［J］.Applied Laser, 2018, 38(1): 52-57.

[10] PAREKH R, BUDDU R K, PATEL R I.Multiphysics simulation of laser cladding process to study the effect of process parameters on clad geometry［J］.Procedia Technology, 2016(23): 529-536.

[11] 张平, 马琳, 赵军军, 等.激光熔覆数值模拟过程中的热源模型［J］.中国表面工程, 2006(S1): 161-164.

    ZHANG PING, MA LIN, ZHAO JUNJUN, et al.Heat source model in numerical simulation of laser cladding［J］.China Surface Engineering, 2006(S1): 161-164.

[12] 李养良, 白小波, 王利, 等.激光熔覆工艺参数对熔覆层组织和性能的影响［J］.热加工工艺, 2009, 38(12): 101-103.

    LI YANGLIANG, BAI XIAOBO, WANG LI, et al.Effects of laser cladding process parameters on the structure and properties of cladding layers［J］.Hot Working Technology, 2009, 38(12): 101-103.

[13] 张雪.激光功率对Ni基-WC熔覆层组织与性能的影响［D］.鞍山: 辽宁科技大学, 2014.

    ZHANG XUE.Effect of laser power on microstructure and properties of Ni-based-WC cladding layer［D］.Anshan: Liaoning University of Science and Technology, 2014.

[14] 杨丹, 宁玉恒, 赵宇光, 等.工艺参数对304不锈钢表面激光熔覆Ni基合金涂层的组织、耐磨性及耐腐蚀性的影响［J］.材料导报, 2017, 31(24): 133-140.

    YANG DAN, NING YUHENG, ZHAO YUGUANG, et al.Effects of process parameters on microstructure, wear resistance and corrosion resistance of laser cladding Ni-based alloy coating on 304 stainless steel surface［J］.Materials Review, 2017, 31(24): 133-140.