飞秒激光跟踪仪跟踪脱靶量零位标定方法

飞秒激光跟踪仪通过PSD探测脱靶量实现目标跟踪, 脱靶量零位是跟踪激光指向反射靶球的中心时反射激光在PSD上输出的光斑位置, 跟踪时以脱靶量零位作为基准计算目标脱靶量, 因此如何准确标定脱靶量零位是仪器实现精确测量的前提。文中在分析角反射器特性的基础上, 结合仪器自身特点提出了一种基于角反射器的飞秒激光跟踪仪跟踪脱靶量零位标定方法。分析了脱靶量零位误差对仪器指向精度的影响; 建立了跟踪脱靶量标定误差模型; 根据仪器结构设计和轴系几何误差对脱靶量零位标定方法进行了仿真, 结果显示, 其误差小于17.8 ?滋m, 当目标距离仪器10 m时, 仪器的指向误差小于1.1″, 该结果对系统误差补偿模型建立奠定了基础。最后, 基于实际装置对仪器的脱靶量零位进行了标定, 为后续仪器的动态测量提供了跟踪基准。

Abstract

A femtosecond laser tracker achieves target tracking through detection of miss distance via a PSD. The location of reflected laser spot on PSD when tracking laser exactly points to center of the retro-reflector, named initial position of miss distance, was the benchmark of miss distance calculation. So it was important to precisely calibrate initial position of miss distance in order to achieve high accurate measurement. A calibration method for initial position of PSD based on the retro-reflector feature analysis was presented in this paper. First, the error factors that may impact miss distance calibration were analyzed, and the mathematic model was established. Then, according to the laser tracker′s structure design and the geometric errors of axes, the calibration method for the initial position was simulated. Results show that the calibration error was limited below 17.8 μm, which means when the retro-reflector was placed at a distance of 10 m from the tracker, the laser tracker′s pointing error was limited below 1.1″. These results can be helpful in further error compensation model. At last the proposed calibration method of initial position of miss distance was applied to the self-developed femtosecond laser tracker, and provides the benchmark for further dynamic measurement.

参考文献

[1] 周维虎, 崔惠绒, 丁金滨, 等. 基于激光跟踪仪的天基望远镜安装测量技术[J].红外与激光工程, 2008, 37(S): 250-252.

Zhou Weihu, Cui Huirong, Ding Jinbin, et al. Assembly measurement technique for space based telescope system based on laser tracker system [J]. Infrared and Laser Engineering, 2008, 37(S):250-252. (in Chinese)

[2] 杨振, 贺磊. 利用激光跟踪仪建立高精度微型测边网[J].红外与激光工程, 2008, 37(S): 137-140.

Yang Zhen, He Lei. Establishing high-precision subminiature ranging network based on laser tracker[J]. Infrared and Laser Engineering, 2008, 37(S): 137-140. (in Chinese)

[3] 李迎伟, 李明, 张靓, 等. 激光跟踪测量技术在地铁检测中的应用[J]. 机械设计与制造, 2007, 7: 98-100.

Li Yingwei, Li Ming, Zhang Liang, et al. Technology of laser tracker and its application in subway train′s testing[J]. Machinery Design and Manufacture, 2007, 7: 98-100. (in Chinese)

[4] Klaus Wendt, Matthias Franke, Frank Hartig. Measuring large 3D structures using four portable tracking laser interferometers[J]. Measurement, 2012, 45: 2339-2345.

[5] 段洁, 孙向阳, 蔡敬海, 等. PSD 在激光位移检测系统中的应用研究[J]. 红外与激光工程, 2007, 36(S): 281-284.

Duan Jie, Sun Xiangyang, Cai Jinghai, et al. Applications research to PSD in the laser displacement detecting system[J]. Infrared and Laser Engineering, 2007, 36(S): 281-284. (in Chinese)

[6] 商秋芳, 李永刚, 杨慧宇, 等. PSD用于零位跟踪的研究及应用[J]. 宇航计测技术, 2012, 32(4): 14-17.

Shang Qiufang, Li Yonggang, Yang Huiyu, et al. Research and application on PSD used in zero tracking[J]. Journal of Astronautic Metrology and Measurement,2012, 32(4): 14-17. (in Chinese)

[7] 董登峰, 周维虎, 纪荣祎, 等. 激光跟踪仪精密跟踪系统研究与设计[J]. 光学精密工程, 2016, 24(2): 309-318.

Dong Dengfeng, Zhou Weihu, Ji Rongyi, et al. Design of precise tracking system of laser tracker[J]. Optics and Precision Engineering, 2016, 24(2): 309-318. (in Chinese)

[8] 陈文磊. 激光跟踪仪控制系统研究[D]. 天津: 天津大学, 2011.

Chen Wenlei. Research on control system of laser tracking system[D]. Tianjin: Tianjin University, 2011. (in Chinese)

[9] 张亚娟. 单站式激光跟踪坐标测量系统研究[D]. 天津: 天津大学, 2012.

Zhang Yajuan. Stand alone laser tracking system[D]. Tianjin: Tianjin University, 2012. (in Chinese)

[10] 杨雨川, 罗晖. 角锥棱镜后向衍射特性的ZEMAX分析[J]. 红外与激光工程, 2010, 39(3): 491-495.

Yang Yuchuan, Luo Hui. Backward diffractive characteristics analysis of cube-corner prism by ZEMAX[J]. Infrared and Laser Engineering, 2010, 39(3): 491-495. (in Chinese)

崔成君, 劳达宝, 董登峰, 高强, 周维虎. 飞秒激光跟踪仪跟踪脱靶量零位标定方法[J]. 红外与激光工程, 2017, 46(1): 0117001. Cui Chengjun, Lao Dabao, Dong Dengfeng, Gao Qiang, Zhou Weihu. Calibration method for initial position of miss distance in femtosecond laser tracker[J]. Infrared and Laser Engineering, 2017, 46(1): 0117001.

飞秒激光跟踪仪跟踪脱靶量零位标定方法

关于本站 Cookie 的使用提示

全站搜索

飞秒激光跟踪仪跟踪脱靶量零位标定方法

相关论文

相关资讯

关于本站 Cookie 的使用提示

全站搜索