光学技术, 2018, 44 (6): 657, 网络出版: 2019-01-10  

激光聚变靶丸快速筛选方法与技术研究

Research on rapid screening method and technology of ICF shells
作者单位
北京理工大学 光电学院 光学测量研究中心, 北京 100081
摘要
为了从海量激光聚变靶丸中高效检测出符合激光核聚变试验要求的靶丸, 提出一种针对靶丸流水式测量的快速筛选技术。所提技术利用机械臂控制显微镜逐一对待测靶丸放大并通过CCD成像, 利用空间矩亚像素细分算法计算出靶丸的亚像素级轮廓信息, 进行圆度评定, 并根据圆度大小对靶丸进行筛选。通过机械臂和靶丸放置盘之间的三维运动配合, 可遍历测量所有待测靶丸。经过理论及实验证明该方法空间分辨力优于0.51μm, 可快速、精确地对海量靶丸进行初步筛选。
Abstract
In order to detect the target of nuclear fusion test from the mass laser fusion target, a rapid screening technique for the measurement of target water flow was proposed. The sub-pixel level information of the target is calculated by the spatial sub-pixel sub-algorithm, and the roundness was evaluated according to the size of the ball To screen. Through the robot arm and the ball between the three-dimensional movement between the plate can be traversed to measure all the test balls. It was proved by theory and experiment that the spatial resolution of this method is better than 0.51μm and the method can be used to select the mass target quickly and accurately.
参考文献

[1] 卢丙辉. 移相衍射干涉法微球型靶丸全表面形貌检测技术研究[D]. 哈尔滨工业大学, 2016.

    Lu Binghui. Research on technologies of microspherical target entire topography inspection by phase shifting diffraction interferometer[D]. Harbin Institute of Technology, 2016

[2] 李波, 张占文, 何智兵,等. 激光惯性约束聚变靶靶丸制备与表征[J]. 强激光与粒子束,2015,27(3):186-203.

    Li Bo, Zhang zhanwen, He Zhibing, et al. Preparation and characterization of laser inertial confinement fusion target [J]. Strong Laser and Particle Beam 2015, 27(3):186-203.

[3] 赵学森, 高党忠, 马小军,等. X射线法ICF靶丸几何参数批处理及壁厚分布计算[J]. 原子能科学技术, 2012, 46(4):487-492.

    Zhao Xuesen, Gao Dangzhong, Ma xiaojun, et al. Batch processing of geometric parameters and wall thickness distribution calculation of icf capsule by x-ray imaging method [J]. Atomic Energy Science and Technology,2012,46(4):487-492.

[4] 王明达, 高党忠, 刘元琼, 等. 扫描电子显微镜测量靶丸表面形貌[J]. 原子能科学技术,1999,33(4):290-292.

    Wang Mingda, Gao Dangzhong, Liu Yuanqiong, et al. Measurement of the surface morphology of laser target by SEM [J].Atomic Energy Science and Technology,1999,33(4):290-292

[5] Stephens R B, Olson D, Huang H, et al. Complete surface mapping of ICF shells [J]. Fusion Science & Technology,2004, 45(2):210-213.

[6] Cook R C, Kozioziemski B J, Nikroo A, et al. National ignition facility target design and fabrication [J]. Laser & Particle Beams, 2008, 26(3):479-487.

[7] 郭俊杰, 邱丽荣, 王允,等. 用于惯性约束聚变靶丸测量的激光差动共焦传感器[J]. 光学精密工程,2013,21(3):644-651.

    Guo Junjie, Qiu Lirong, Wang Yun, et al. Laser differential cofocal sensor for ICF capsule measurement [J]. Optics and Precision Engineering,2013,21(3):644-651.

[8] Lyvers E P, Mitchell O R, Akey M L, et al. Subpixel measurements using a moment-based edge operator[J]. IEEE Transactions on Pattern Analysis & Machine Intelligence,1989,11(12):1293-1309.

[9] 王社阳, 宋申民, 陈兴林,等. 改进的空间矩亚像素边缘检测算法[J]. 哈尔滨工业大学学报,2006,38(6):870-872.

    Wang Sheyang, Song Shenmin, Chen Xinglin, et al. Improvement spatial moment subpixel edge detection method [J]. Journal Of Harbin Institute of Technology,2006,38(6):870-872.

[10] 陈向伟, 王龙山, 刘庆民,等. 基于CCD图像的圆度误差测量的研究[J]. 半导体光电,2004,25(4):313-316.

    Chen Xiangwei, Wang Longshan, Liu Qinmin, et al. Research on measurement of roundness errors based on CCD image [J]. Semiconductor Optoelectronics,2004,25(4):313-316.

[11] 孔丹, 李介谷. 基于空间矩的灰度边缘亚像元度量精度分析[J]. 红外与激光工程,1998, 27(2):6-10.

    Kong Dan, Li Jiegu. Precision analysis of subpixel measurement of edges based spatial moment in a grey level image [J]. Infrared and Laser engineering,1998,27(2):6-10.

李少白, 赵维谦, 马仙仙, 王龙肖, 王允. 激光聚变靶丸快速筛选方法与技术研究[J]. 光学技术, 2018, 44(6): 657. LI Shaobai, ZHAO Weiqian, MA Xianxian, WANG Longxiao, WANG Yun. Research on rapid screening method and technology of ICF shells[J]. Optical Technique, 2018, 44(6): 657.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!