靶丸表面轮廓形貌AFM精密测量及特性评价
[1] Remington B A,Weber S V,Haan S W,et al.Laser-driven hydrodynamic instability experiments[J].Phys Fluids B,1993,5(7):2589-2595.
[2] McEachern R L,Moore C E,Wallace R J.The design,performance and application of an atomic force microscope-based profilometer[J].J Vac Sci Technol A,1995,13(3):893-899.
[3] Cook R,Overturf G E,Buckley S R,et al.Production and characterization of doped mandrels for inertial-confinement fusion experiments[J].J Vac Sci Technol A,1994,12(4):1275-1280.
[4] 高党忠,王明达,刘元琼,等.用原子力显微镜4π旋转技术测量靶丸表面粗糙度[J].强激光与粒子束,1999,11(3):321-324.
Gao D Z,Wang M D,Liu Y Q,et al.Measurement of target surface roughness with 4π turning technology of AFM.High Power Laser and Particle Beams,1999,11(3):321-324
[5] 王明达,高党忠,刘元琼,等.扫描电子显微镜测量靶丸表面形貌[J].原子能科学技术,1999,33(4):290-293.
Wang M D,Gao D Z,Liu Y Q,et al.Target surface topography measurement with scanning electron microscope.Atomic Energy Science and Technology,1999,33(4):290-293
[6] 任新生.精密球度测量的研究[D].上海:上海交通大学1995.1-4.
Ren X S.Study on precision sphericity measurement.Doctor dissertation.Shanghai:Shanghai Jiao Tong University,1995.1-4
[7] 曹麟祥,王丙甲.圆度检测技术[M].北京:国防工业出版社,1998.
Cao L X,Wang B J.Roundness measurement and verification techniques.Beijing:National Defense Industry Press,1998
[8] Schultz K R,Goodin D T,Nobile A,et al.IFE target fabrication and injection-achieving "believability"[R].General Atomics Report,2000.
[9] McQuillan B W,Nikroo A,Steinman D A,et al.The PAMS/GDP process for production of ICF target mandrels[R].General Atomics Report,1996.
[10] Schultz K,Inertial confinement fusion target component fabrication and technology development support[R].ICF Annual Report,2001.
赵学森, 孙涛, 高党忠, 唐永建, 董申. 靶丸表面轮廓形貌AFM精密测量及特性评价[J]. 强激光与粒子束, 2005, 17(12): 1847. ZHAO Xue-sen, SUN Tao, GAO Dang-zhong, TANG Yong-jian, DONG Shen. Measurement and characteristic evaluation of target circumferential topography with AFM[J]. High Power Laser and Particle Beams, 2005, 17(12): 1847.