工艺参数对Rene80激光定向凝固组影响研究
张冬云, 李志波, 赵恒, 左铁钏. 工艺参数对Rene80激光定向凝固组影响研究[J]. 应用激光, 2013, 33(2): 113.
Zhang Dongyun, Li Zhibo, Zhao Heng, Zuo Tiechuan. Research of the Influence of Processing Parameter on Laser Directional Solidification Structure[J]. APPLIED LASER, 2013, 33(2): 113.
[1] GAUMANN M, RUSTERHOLZ H, KURZ W. Single Crystal Turbine Components Repaired by Epitaxial Laser Metal Forming: Materials for Advanced Power Engineering 1998, J. Lecomte-Beckers, et al [C]. Germany: Forschungszentrum J.lich, 1998: 1486-1497.
[2] GAUMANN M, HENRY S, CLETON F, et al. Epitaxial laser metal forming: analysis of microstructure formation [J]. Materials Science and Engineering, A, 1999(271): 232-241.
[3] YOSHIHIRO FUJITA, KAZUYOSHI SAIDA, KAZUTOSHI NISHIMOTO. Laser Epitaxial Cladding of Ni-base Single Crystal Superalloy [J]. Materials Science Forum Vols, 2008(580-582): 67-70.
[4] 张亚玮, 张述泉, 王华明. 激光熔化沉积定向快速凝固高温合金组织及性能[J]. 稀有金属材料与工程, 2008(37): 169-172.
[5] 金具涛, 张永忠, 石力开, 等. 激光熔化沉积Rene95镍基高温合金的凝固组织及力学性能[J]. 稀有金属, 2009(33): 805-809.
[6] 冯丽萍, 黄卫东, 林鑫, 等. FGH95合金激光成形定向凝固显微组织与性能[J]. 中国有色金属学报, 2003 (13) : 181-187.
[7] 《中国航空材料手册》编辑委员会. 中国航空材料手册[M]. 北京: 中国标准出版社, 2002: 771-772.
[8] 冶军. 美国镍基高温合金[M]. 北京: 科学出版社, 1978. 450-451.
[9] HUNT J D. In Solidification and Casting of Metals[M]. London: The Metal Society, 1979.
[10] 黄卫东. 激光立体成形[M]. 西安: 西北工业大学出版社, 2007: 126-135.
[11] 杨爱民. K4169高温合金组织细化及性能优化研究[D]. 西安: 西北工业大学, 2002
[12] WANG JIAJIN. Laser processing technologies[M]. Beijing: China Metric Process, 1992(9): 10-15..
[13] HUNT J D. Steady state columnar and equiaxed growth of dendrites and eutectic [J]. Mater. Sci. Eng., 1984(65): 75-83.
[14] 冯丽萍, 黄卫东, 李延民, 等. 基材晶体取向对激光多层涂覆微观组织的影响[J]. 中国激光, 2001, 28(10): 949-952.
[15] FENG LIPING, HUANG WEIDONG, LIN XIN, et al. Laser Multi-layer Cladding Experiment on the DD3 Single Crystal Using FGH95 Powder [J]. Chinese Journal of Aeronautics, 2002(2): 121-127.
张冬云, 李志波, 赵恒, 左铁钏. 工艺参数对Rene80激光定向凝固组影响研究[J]. 应用激光, 2013, 33(2): 113. Zhang Dongyun, Li Zhibo, Zhao Heng, Zuo Tiechuan. Research of the Influence of Processing Parameter on Laser Directional Solidification Structure[J]. APPLIED LASER, 2013, 33(2): 113.